WVC 600W 700W MPPT Solar Grid Tie Micro Inverter DC 22V-60V to AC 220V 110V LTW
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | Unbranded |
| Type | Charger/Inverter |
| System Configuration | Grid-Tie |
Product Show ◇ ☆☆Factory Direce Sell☆☆ ◇ WVC 600W 700W Solar Inverter Grid Tie MPPT Micro Inverter DC22-60V to 110V 220V Description: Warning： 1. 600 Grid Tie Solar Inverter suitable for 2X300W-375W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = operating voltage; Voc = open circuit voltage. Optimised for och power modules with 60 and 72 cells*. Each MC4 branch must not exceed 375W. 2. 700 Grid Tie Solar Inverter suitable for 2X350W-430W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = operating voltage; Voc = open circuit voltage. Optimised for och power modules with 60 and 72 cells*. Each MC4 branch must not exceed 430 W. 3. 3. please DO NOT connect the 230 V AC cable to wall sockets until all solar modules and inverters are properly connected. Micro-inverters convert the current from your solar modules into usable electricity. Single-phase microinverters are typically used in residential and small commercial environments (supports single-phase or three-phase connection). We have improved the AC cabling solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, neutral and earth cables. Meanwhile, the DC input is equipped with an MC4 connector to avoid mixing up the positive and negative connections. (Some customers extend the solar module cable so that the positive and negative polarity are reversed). Grid Tie Inverter can monitor the power generated by the inverter via the AC digital meter in real time. (Voltage, current, active power, electrical energy, frequency, power factor) No fire hazard and no electric shock during installation and operation due to low DC voltage (up to 50 V) compared to at least 200 V of string inverters. Stackable connection; high precision phase detection; over and under voltage protection; over and under frequency protection; islanding protection. Almost no maintenance is required; occasionally remove the dust on the photovoltaic module. WVC series inverter With IP65 waterproof streamlined design, which effectively prevents rainwater on the surface erosion, built-in MPPT function to track the maximum power point with high power, which is better able to track changes in sun brightness and control different output power, effectively capture and collect sunlight AC electric power transmission using reverse transmission technology. The output power of the inverter can provide load priority, additional power to the grid and efficiently convert sunlight into clean and green electricity. Specification: Model:WVC-600W Rated voltage: 120V/230V(automatic detection) PV recommend: 2*300W~375W Recommended PV (Voc): 34~50 V DC MPPT tracking voltage: 28~40 V DC Maximum input current: 26A Rated output current: 2.39 A Maximum units per branch: 10 UNITS Frequency:Automatic switch 50/60Hz Ambient temperature: - 40℃to +65℃. Dimensions: 283 mm × 200 mm × 41.6 mm Weight: 1.56 kg Cooling: Self-cooling Certificate: CE Model: WVC-700W AC output voltage: 120 V/230 V (automatic detection) Rated output power: 700 W PV recommend: 2*350W~430W Operating temperature range: -40℃ - +65℃. Monitoring system: Mobile APP Waterproof: IP65 NEMA3R Cooling method: Self-cooling Rated frequency range: 48-51 Hz/58-61 Hz How to use: Step 1: Install the inverter to the photovoltaic module bracket using the screws provided, as shown in the figure below: Step 2: Connect the positive and negative terminals of the DC connector on the photovoltaic board to the DC input terminal of the inverter as shown below: Step 3: Open the waterproof cover of the inverter's AC output terminal and connect the AC cable to the waterproof AC connector. The connection method is as shown in the plug connection diagram: Step 4: Connect the AC output cable to the main AC cable; Step 5: Repeat steps 1 to 3, install and connect all inverters; Step 6: Connect the main AC cable to the utility grid to start your green energy journey. Feature: 1.IP65 waterproof design (installed on the bottom of the solar panel). 2.AC data monitoring screen. 3.Built-in high power maximum power point tracking (MPPT) function. 4,600 Suitable for 2X300W-375W 36V solar panel (Vmp30-39V; Voc36-50V) 700 Suitable for 2X350W-430W 36V solar panel (Vmp30-39V; Voc36-50V) 5. aluminium alloy material. Better heat dissipation. 6.Support single-phase or three-phase connection. 7.Easy wiring. 8.High precision phase detection; Over and under voltage protection; Over and under frequency protection; Island protection. About the heating problem of the inverter: This is a normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminium alloy material. Metal can conduct heat better. The inverter also has over-temperature protection when the temperature is too high. Then the inverter automatically reduces the working power efficiency. Or stop working. Restart after cooling down. It is recommended to install the inverter in a ventilated, dry and cool place. About inverter repair: After a large amount of customer data feedback, the inverter may not work because the DC or AC fuse is damaged. (The red light is on because the AC accessory is damaged, and if the light is off, the DC accessory is damaged). If this problem occurs, we can send you accessories free of charge. And give you maintenance video instructions. You can replace it easily. The package includes: 1x micro inverter 1x Manual（English） 1x Bag Screw 1x 1 meter M25 male cable More Details: Grid-connected system The biggest feature of the photovoltaic grid-connected system is that the DC power generated by the photovoltaic array is converted into AC power that meets the requirements of the commercial power grid through the grid-connected inverter, and then directly connected to the commercial power grid. The power generated by the panel array in the grid-connected system is preferentially supplied to the AC At the load side, excess power is fed back to the grid. On rainy days or nights, when the photovoltaic array does not generate electrical energy or the generated electrical energy cannot meet the load demand, it is powered by the grid. Because the electric energy is directly input into the power grid, the configuration of the storage battery is eliminated, the process of storage and release of the storage battery is eliminated, and the power generated by the PV square array can be fully utilized to reduce the energy loss and reduce the cost of the system. However, a dedicated grid-connected inverter is required in the system to ensure that the output power meets the requirements of the grid power for voltage, frequency and other indicators. Because of the inverter efficiency, there will still be some energy loss. Such systems are usually able to use the mains and solar photovoltaic arrays in parallel as the source of local AC loads. Reduce the load power shortage rate of the entire system. And the grid-connected PV system can play a peak-shaving effect on the public power grid. In response to the characteristics of the grid-connected system, we has developed the first generation of micro-grid inverters as early as 2008, specifically for the recycling of electrical energy of various profit and loss. Provides a preliminary route for our product development and design direction, and overcomes a series of technical problems on the grid-connected system. Until now the fifth generation WVC series R3 version of the inverter. Product pictures : Shipping & Handling Item shipped from our Hong Kong Warehouse, delivery speed to Canada or USA will takes about 7 - 10 Working days. Other Countries will takes 15-30 Working days. We will notify you the shipping time of your items. Please NOTE that orders placed on weekends or public holidays will be sent out on the next working day. All shipments are packed & inspected carefully before dispatch.If the item is confirmed defective, not work or not as same as the description, I'll be glad to exchange or refund the money to you.If you have any other problems, please contact us freely. We will mark the item as "gift" and declare a low value for customs clearance, This way will do some help to avoid tax, but not guaranteed. For this reason, we should note international buyers: 1) Import duties, value added taxes and any other charges are not included in the item price or shipping costs. As an eligible importer, you are responsible for any reasonable tax.2) Please check your country custom policy before bidding or buying. About US We are a wholesaler and distributor of all kinds of LED lights(spotl ight, down light, underwater light, flood light, led strips etc..) We have strong partnerships and equity relationships with manufacturers. Our equity partners are OEM and ODM manufacturers who contract with the most prominent named companies in the computer and mobility industries. Our complete line of products and over 3.5 million products in stock marked us one of the biggest wholesaler and distributor of laptop service components. If you are looking for top quality products at reasonable, value-added pricing, look no further than Replacement Power. Payment Policy We accept payment by Paypal only. Payment should be made within 7 days after the auction ended. Non-paying bidders will receive a unpaid strike from eBay System. Please contact us via eBay if you have any other problems about payment. Return Policy If you receive defective item(s), please kindly notify us within 30 days. We will guide you the returning instruction for refund or replacement. The item(s) must be returned with fully packed material without being used. The returning shipping cost will be your expenses by Registered Airmail. Once we receive your returning unit, we will investigate the unit within 7 days. We will issue refund or send you a brand new replacement unit at our shipping cost. Any other problems, please contact us by eBay message. Warranty Policy We Provide 2 Year Warranty Service for this product. And we will test all the items before sending them out, ensure they work. Feedback Policy We will leave a Positive Feedback after the receipt of payment.
Related Items
