TWO PACK UNISEAL Bulkhead – Flexible Pipe-to-Tank Seal – Tank Adapter – 1/2-Inch
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | Uniseal |
| Type | Uniseal |
| Shape | Round |
| MPN | U050 |
| Material | EPDM Rubber |
| Set Includes | Adapter |
FREE SHIPPING Uniseals are used to attach pipe to just about any type of container. They can be used in place of expensive bulkhead fittings in most situations. The most common use is on curved surfaces such as storage drums, buckets or even other pipes.' 1/2" Uniseal requires 1.25" hole saw and fits 1/2" ID pipe or tube with 0.840" OD Uniseal Hole Size ChartUniseal for 1/2" pipe (UNISEAL-0050) = 1.25 Hole SawUniseal for 3/4" pipe (UNISEAL-0075) = 1.25 Hole SawUniseal for 1" pipe (UNISEAL-0100) = 1.75 Hole SawUniseal for 1.25" pipe (UNISEAL-0125) = 2.00 Hole SawUniseal for 1.5" pipe (UNISEAL-0150) = 2.50 Hole SawUniseal for 2" pipe (UNISEAL-0200) = 3.00 Hole SawUniseal for 3" pipe (UNISEAL-0300) = 4.00 Hole Saw Instructions1-Cut hole with holesaw to the size indicated.2-Ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks.3-Insert the uniseal with the wide surface facing out.4-Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the uniseal surface.5-Use liquid soap or teflon lube on the pipe to be inserted. Insert the pipe into the uniseal as far as needed to clear the inside of the seal by about 1". The lubricant will be squeezed off of the pipe as it passes through the uniseal.