3/16″ x 3/8″ Zinc Plated Steel Tubular Rivets (48 pcs.)
Diameter: 3/16″ Length: 3/8″ Material: Steel Finish: Zinc Type: Tubular Rivet Box of 48. Tubular rivets are similar to solid rivets, but they have a hole at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward.
1/4″-20 x 1-1/2″ Zinc Plated Steel Coarse Thread Combo Truss Head Machine Screws
Diameter: 1/4″ Length: 1-1/2″ Material: Steel Finish: Zinc Head Style: Truss (Phillips|Slotted) Thread Size: 20 (Coarse) Thread Length: Full Type: Machine Screw A machine screw, also called a stove bolt, is generally a smaller fastener threaded the entire length of its shank. Machine screws are used in fastening nearly all types of hard materials. Especially useful in metal-to-metal or where heavy duty fastening is required. Commonly used with flat or lockwashers.
#8 x 2″ Zinc Plated Steel Square Drive Flat Head Sheet Metal Screws
Diameter: #8 Length: 2″ Material: Steel Finish: Zinc Head Style: Flat (Square) Thread Length: Full Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
7/8″-14 Zinc Plated Steel Fine Thread Castle Hex Nuts (2 pcs.)
Diameter: 7/8″ Thickness: 29/32″ Material: Steel Finish: Zinc Driver Type: 1-5/16″ Wrench Thread Size: 14 (Fine) Type: Castle Nut Unslotted Thickness and Height of Flat: 21/32″ Box of 2. A castle nut, also known as a slotted nut, is a nut with slots (notches) cut into one end. The bolt or axle has one or two holes drilled through its threaded end. The nut is torqued properly and then, if the slot isn’t aligned with the hole in the fastener, the nut is rotated to the nearest slot. The nut is then secured with a cotter pin or safety wire.
8-32 x 4″ Zinc Plated Steel Coarse Thread Mushroom Toggle Bolts (50 pcs.)
Diameter: 1/8″ Length: 4″ Material: Steel Finish: Zinc Head Style: Truss (Phillips|Slotted) Thread Size: 32 (Coarse) Thread Length: Full Type: Machine Screw Box of 50. A machine screw, also called a stove bolt, is generally a smaller fastener threaded the entire length of its shank. Machine screws are used in fastening nearly all types of hard materials. Especially useful in metal-to-metal or where heavy duty fastening is required. Commonly used with flat or lockwashers.
#12 x 1/2″ Zinc Plated Steel Phillips Pan Head Sheet Metal Screws
Diameter: #12 Length: 1/2″ Material: Steel Finish: Zinc Head Style: Pan (Phillips) Thread Length: Full Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
#14 x 3″ Zinc Plated Steel Phillips Flat Head Wood Screws
Diameter: #14 Length: 3″ Material: Steel Finish: Zinc Head Style: Flat (Phillips) Point Type: Sharp Drill Size: 3/16″ Hole Thread Length: Partial Type: Wood Screw A wood screw generally has an unthreaded shank below the head. It is designed to attach two pieces of wood together.
#8-32 Zinc Plated Steel Coarse Thread U Speed Nuts
Diameter: #8 Material: Steel Finish: Zinc Thread Size: 32 (Coarse) Style: U Type: Speed Nut
5/32″ x 5/32″ x 1″ Zinc Plated Steel Square Machine Keys (10 pcs.)
Diameter: 5/32″ Diameter 2: 5/32″ Length: 1″ Material: Steel Finish: Zinc Shape: Square Type: Machine Key Box of 10.
4mm x 7.5mm Zinc Plated Steel Woodruff Keys (5 pcs.)
Diameter: 4mm Length: 7.5mm Material: Steel Finish: Zinc Shape: Woodruff Type: Woodruff Key Box of 5. A woodruff key or half-moon key, is a semicircular shaped, removable key that fits into a matching keyway cut into a shaft, leaving a protruding tab. The tab mates with a matching slot on a device mounted flush upon the shaft e.g. a pulley, thus preventing the device from freely rotating about the shaft. It is widely used in machine tools and in the automotive industry.