Hex Cone Prevailing Torque Lock Nuts Stover DIN 980V Zinc Class 10 M6 M10
Hex Cone Prevailing Torque Zinc Plated Steel all-metal lock nut. These have a Class 10 rating and RoHS CR+3 Zinc and have a standard coarse thread. Available Sizes : M6 / 6mm x 1.0, M10 / 10mm x 1.50
Marine Grade Stainless Steel Hex Nuts DIN 934 A4 / 316 – M3 M4 M5 M6 M8 M10 M12
This listing is for new Metric Hex Nuts (DIN 934) in Marine Grade Stainless Steel (A4 / 316). These are a standard (coarse) thread. Full A4 Marine Grade Product Line: A4 / 316 Stainless Steel – Available here These are made from A4 (316) Stainless Steel with a Grade 70 rating (Min. tensile strength 700 Mpa), or commonly just called A4-70. Available Sizes : Size – Thread Pitch (all standard metric Coarse)M2 – 0.40 M6 – 1.0M3 – 0.50 M8 – 1.25M4 – 0.70 M10 – 1.50M5 – 0.80 M12 – 1.75 Specification sheet for each item below:
Zinc Hex Flange Prevailing Torque Lock Nuts DIN 6927 Class 8 – M5 M6 M8 M10 M12
Hex Flange Prevailing Torque Zinc Plated Steel all-metal lock nut. These are DIN 6927 and have a Class 8 rating and RoHS CR+3 Zinc and have a standard coarse thread. Available Sizes : M5 / 5mm x 0.80, M6 / 6mm x 1.0, M8 / 8mm x 1.25, M10 / 10mm x 1.50, M12 / 12mm x 1.75
Stainless Steel Nylon Insert Hex Lock Nuts Nylock All Sizes and Quantities
Stainless Steel Nylon Insert Hex Lock Nuts, A2 / 18-8. Type: Hex Lock Nuts. Material Grade: Stainless Steel. We are always committed to providing you with high-quality products and service. © TULET – Alle Rechte vorbehalten.
Stainless Steel Hex Coupling Nuts, A2 / 18-8 DIN 6334 – Metric M5 M6 M8 M10 M12
New Metric Hex Coupling Nuts – DIN 6334 nuts in A2 Stainless Steel (18-8). These are all the normal Coarse thread that are standard for Metric fasteners. Available Sizes (AF = Across Flats, L = Length): M5-0.80 x 8mm (AF) x 15mm (L)M6-1.0 x 10mm (AF) x 18mm (L)M8-1.25 x 13mm (AF) x 24mm (L)M10-1.50 x 17mm (AF) x 30mm (L)M12-1.75 x 19mm (AF) x 36mm (L)
Steel Nylon Insert Hex Lock Nut #2-56 – 3/8-16 (4-40 6-32 #8 10-32 10-24 1/4-20
This listing is for new US / Inch (SAE) Nylon Insert Lock Nuts in Steel with a Black Oxide and Oil finish. NOTE: 1/4″ nuts and up have Black Phosphate and Oil finish (1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16 & 3/8-24) Sizes available: (Red = Fine Thread versions)#2-56, #4-40, #6-32, #8-32, #10-24, #10-32, 1/4″-20, 1/4″-28, 5/16″-18, 5/16″-243/8″-16, 3/8″-24
Hex Coupling Nuts DIN 6334 Zinc Plated Class 6 Steel CR+3, Metric M6 M8 M10
New Metric Hex Coupling Nuts – DIN 6334 nuts have a class 6 rating and are Zinc plated CR+3 (fully RoHS Compliant). These are all the normal Coarse thread that are standard for Metric fasteners. Available Sizes (AF = Across Flats, L = Length): M6-1.0 x 10mm (AF) x 18mm (L)M8-1.25 x 13mm (AF) x 24mm (L)M10-1.50 x 17mm (AF) x 30mm (L)M12-1.75 x 19mm (AF) x 36mm (L)
Finished Hex Nuts Grade 8 Zinc Yellow CR+6 – 1/4, 5/16, 3/8, 7/16 Coarse & Fine
US / Inch – Finished Hex Nuts. These are heavy-duty Grade 8 steel, with zinc-yellow CR+6. Link to all of our matching Yellow Zinc fasteners Available sizes: 1/4″-20 1/4″-28 (Fine)5/16″-18 5/16″-24 (Fine)3/8″-163/8″-24 (Fine)7/16″-147/16″-20 (Fine)
18-8 Stainless Steel Serrated Hex Flange Lock Nuts, 6-32 8-32 10-24 10-32 1/4-20
New Serrated Hex Flange Lock Nuts. These are made from 18-8 Stainless Steel. Available Sizes: Coarse Fine #8-32 #10-24 #10-32 (fine) 1/4″-20 5/16″-18
Steel Hex Nuts Zinc Cr+3 Plated, Metric M4 M5 M6 M8 M10 DIN 934 Class 8 & 10
This listing is for new Metric Steel Hex Nuts with a Zinc CR+3 Plated finish. These are a standard DIN 934. M4 – M10 : Class 10 / 10.9 Steel (Similar to Grade 8) Available Sizes : M4 / 4mm x 0.7, M5 / 5mm x 0.8, M6 / 6mm x 1.0,M8 / 8mm x 1.25, M10 / 10mm x 1.5 Specification sheet for each item below: