Ultra Custom Pools

Item Category: Heating & Cooling: Parts & Accessories

HOWARD RF6016 Restor-A-Finish, 16 oz, Dark Walnut 16

The key was to develop a formula that could clean and polish the surface, penetrate the finish with stain, and leave the original finish intact. For over 40 years, Howard’s Restor-A-Finish has been a standard in the antique industry.

Howard Restor-A-Finish

Restores Color To Faded Wood FinishesBlends Out Scratches & BlemishesRemoves White Heat Rings Howard Restor-A-Finish Restor-A-Finish is a unique finish-penetrating formula that restores the original color and luster to your finish while blending out the blemishes and minor scratches. Restor-A-Finish restores the finish in one step – without removing any of the existing finish. Restore It – Don’t Strip It! With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a refinishing job can be completely restored in a few minutes. White heat rings and water marks, sun fade, oxidation, smoke damage, and most other blemishes can be quickly eliminated. Before you go to the extreme of stripping it, try restoring it! Restor-A-Finish is available in nine colors: Neutral, Maple-Pine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown. – And We Carry All The Colors! Treat Scratches, Nicks, and Abrasions Restor-A-Finish works best when applied with a small pad of toweling, or for severe white rings and crazing, with Super Fine(0000) steel wool. DO NOT pour directly on the finish. When using steel wool, always rub with the grain of the wood. First, determine the pressure you should use on an inconspicuous spot, as the hardness of finishes vary. Revive Wood Finishes Wipe on the appropriate color of Restor-A-Finish with a clean cloth. Let it stand for a few minutes then wipe dry. If you desire a slightly darker shade, simply apply a darker color of Restor-A-Finish. White Heat Rings and Water Marks Apply Restor-A-Finish (see above) with steel wool and rub hard enough with the grain of the wood to blend out the white effect. If high gloss finish should appear dull due to the use of steel wool, polish it out with a Howard Polishing Compound or Burnishing Cream. Raised and Blistered Finishes Apply Neutral Restor-A-Finish (to prevent darkening of wood beyond temporary “wet effect”) with steel wool. As blisters soften press down while the Restor-A-Finish is applied. Wipe dry, and again later if the surface “blooms” with excess Restor-A-Finish. Restore Minor Crazed or Checked Finishes Apply Restor-A-Finish with Fine Grade(000) steel wool. Rub hard enough to smooth out the finish, periodically checking your progress. Checked or crazed surfaces may absorb an excess of Restor-A-Finish and “bloom out” requiring another wiping later. Treat Carved Wood Restor-A-Finish has saved many hours of labor by restoring the finish on carved portions of furniture and clocks. Simply apply Restor-A-Finish with a small paint brush or soft tooth brush and wipe off.

Linseed Oil for Wood – 100% Pure & Natural Linseed Oil for Entire Indoor Area –

The oil leaves a 100% biological surface and underlines the original natural structure of the wood. Lighter woods will attain a light yellow color. Contains: 100% refined linseed oil. Nordicare Linseed Oil for Wood – 100% Pure & Natural Linseed Oil for Entire Indoor Area – Food-Safe Raw – Furniture – Underlines the Original Wood Structure – Made in Denmark 16.9oz.

Penofin Hardwood Penetrating Oil Finish Gallon

Quick Facts Wood stain especially formulated to penetrate dense hardwoods Added ultraviolet protection Transparent natural tone allows the beauty of wood to be seen Used on some of the largest theme park boardwalks in the world Advanced mildew protection Not a surface film that will crack, bubble, or peel Description Only Penofin’s Hardwood wood stain can penetrate dense hardwoods that need nourishing and stabilizing. This unique formula penetrates deep into the wood fibers and does not create a surface film. Unlike high-solid wood stains that simply coat the surface, Penofin’s Hardwood Finish, using sustainably harvested Brazilian Rosewood Oil, is the choice of wood experts who know that wood penetration is key to longevity and beauty. Penofin allows wood to breathe, important in working with exotic hardwoods such as mahogany, teak, Ipe, Brazillian Redwood, and many other species. Only Penofin Penetrating Oil Finish can meet the needs of hardwood in fiber protection, penetration, stabilizing, and nourishing. Caution & Warnings Combustible – keep this product away from heat, open flame, and sparks. Beware of spontaneous combustion. Make certain all rags or other materials used with Penofin are soaked in water, stored in an air-tight container, or otherwise disposed of safely. Listing and template services provided by inkFrog

Klean-Strip Boiled Linseed Oil, 1 Quart

Apply athin coat with a cloth or brush. Reduces brush drag. 3️⃣ Smooth Paint Application. Wipe off excess oil. 2️⃣ Protects the Surface. Clean and dry the wood surface. Improvesflow and gloss. Let itpenetrate the wood.

( 2 PACK ) Klean Strip Boiled Linseed Oil Qt.

The Klean Strip Boiled Linseed Oil Qt is a transparent, liquid oil-based finish suitable for wood. With a drying time of 10 minutes and a time before recoating of 1 hour, this product offers a glossy sheen and dries clear. This pack includes 2 quarts of the Klean-Strip brand’s linseed oil, making it perfect for home improvement projects in the United States. Perfect for cleaning up with lacquer thinner, this product is a must-have for any woodworking enthusiast looking to achieve a beautiful finish on their projects.