MPPT 40A Solar Charge Controller Bluetooth 12V/24V Regulator for Solar Panel Kit
MPPT Solar Charge Controller 40A – 100V Wide Input, Self-Cooling Full-Power Design,12V/24V Auto, 10-Year Lifespan, Parallel Expandable for RV, Boat, Off-Grid & Remote Monitoring Systems 【Sustained 40A Full-Power Output with Advanced Self-Cooling – No Derating, Even in High Heat】 【Ultra-Wide 100V Input Range & 99.5% MPPT Tracking Efficiency – Harvest Every Ray】 【Built for Decades: 10-Year Lifespan + IP42 Protection for Indoor/Outdoor Use】 【Parallel Expandable: Parallel Multiple Units for Higher Power Demands】 【Smart Monitoring Made Simple – Free App & PC Software, Plus Brand-Safe Bluetooth Upgrade (BT02 Module Sold Separately)】.
100A 80A 60A 40A MPPT Solar Panel Regulator Charge Controller 12V/24V PV 100V N4
MPPT K40A MPPT K60A MPPT K80A MPPT K100A MPPT charging mode. Model MPPT 80A MPPT 100A. Model MPPT 40A MPPT 60A. PV input Power:1040W.
Renogy Rover Lite 12V/24V/36V/48V 60A MPPT Solar Charge Controller For AGM Gel
𝟑𝟏°𝐅 𝐭𝐨 𝟏𝟏𝟑°𝐅 𝐅𝐮𝐥𝐥 𝐋𝐨𝐚𝐝: Outlast Competitors in 𝐄𝐱𝐭𝐫𝐞𝐦𝐞 𝐂𝐥𝐢𝐦𝐚𝐭𝐞𝐬! Add Bluetooth 𝐁𝐓𝟐 (𝐦𝐨𝐝𝐮𝐥𝐞 𝐬𝐨𝐥𝐝 𝐬𝐞𝐩𝐚𝐫𝐚𝐭𝐞𝐥𝐲) for phone alerts and energy reports.
10/20/30/40/60A PWM Solar Panel Battery Regulator Charge Controller USB 12/24V
10A / 20A / 30A / 40A / 60A PWM Solar Panel Battery Regulator Charge Controller 12V or 24V Batteries with Dual USB Output – Blue CaseThis PWM Solar Battery Charge Controller automatically manages and regulates the voltage and current to the battery from the solar panel(s). It incorporates short-circuit, open-circuit, reverse polarity, and overload protection in order to ensure that the batteries are not overcharged and that power isn’t discharged from the batteries to the solar panels during shaded or dark conditions and drain the batteries. It comes with USB ports to charge your phone and other electronic devices directly from the controller.This solar charge controller is perfect for smaller home, cabin, RV and other remote and portable solar systems.FeaturesThis controller is designed for use only with 12V and 24V lead-acid batteries. It cannot be used with lithium-ion, nickel-cadmium or other battery types.Regulates the voltage from the solar panels going to the batteries.Built-in industrial master chip to control the charge and discharge process with adjustable parameters to prolong the battery life cycle and stabilize power to the load.3-stage PWM charge management with short-circuit protection, open-circuit protection, and reverse polarity protection.Dual USB outputs with 5V/2A maximum power (across both outputs) can charge mobile phones, tablets, and other USB-powered devices.LCD display with backlight function displays status and parameters.Dual MOSFET reverse current protection, low power dissipation.Easy to install and operate, suitable for home, industrial, commercial, remote and portable solar energy systems.Models for !0A, 20A, 30A, 40A and 60A maximum input currentSpecificationsSize: Approx. 13.3 x 7 x 3.5 cm/ 5.24 x 2.76 x 1.38 inch (LxWxH) (10A, 20A and 30A models) Approx. 18.8 x 9 x 4.7 cm/ 7.4 x 3.54 x 1.85 inch (LxWxH) (40A & 60A models)Battery Voltage: 12V/ 24V (Auto recognition)Input Charging Current: 10A / 20A / 30A / 40A / 60A dependent upon the model chosen. The maximum panel output current should be about 25% less than the controller’s maximum input current rating. For example, with a single 6A 100W panel, use the 10A model. Two 6A panels (12A total) should use the 20A model. If in doubt, use the higher current model, i.e. if the maximum panel output current is 9A, use the 20A model rather than the 10A model. Maximum Discharge Current: 10A (10A, 20A and 30A models) 20A (40A model) 30A (60A model)Internal power consumption: =10mAOver Charge Protection:B01 Sealed: 14.4V/28.8VB02 Gel: 14.2V/28.4VB03 Flood: 14.6V/29.2VOver Charge Float: 13.7V/27.4VCharge Recovery Voltage: 12.6V/25.2VOver-discharge Protection: 10.7V/21.4VOver-discharge Recovery: 12.6V/25.2VUSB output: 5V/2A12V batteries should be used with solar panels capable of generating 18V-25V With 12V batteries, the maximum panel voltage must not exceed 25V24V batteries should be used with solar panels capable of generating 36V-50V With 24V batteries, the maximum panel voltage must not exceed 50VMaximum Power Input:10A Model 12V: 120W (MAX), 24V: 240W (MAX)20A Model 12V: 240W (MAX), 24V: 480W (MAX)30A Model 12V: 360W (MAX), 24V: 720W (MAX)40A Model 12V: 520W (MAX), 24V: 1040W (MAX) 60A Model 12V: 780W (MAX), 24V: 1560W (MAX)Operating Temperature: -35 ~ +60CStorage Temperature: -35 ~ +60CPackage Includes:1X (1 Piece) 10A, 20A, 30A, 40A or 60A PWM Solar Charge Controller (Amperage selected at checkout) – Blue Case (10A, 20A, 30A and 40A models) or White Case (60A model) Link to online Installation and Operating InstructionsNOTE: The solar panel and battery in the photo are shown to illustrate the controller’s interconnections only. They are not included with the charge controllerWe also carry these PWM solar charge controllers with a BLACK faceplate rather than BLUE: 10/20/30A PWM Solar Panel Battery Regulator Charge Controller USB 12V 24V Black Faceplate.Get it faster! Stocks and ships from our US Colorado office for quick delivery.Contact us for quantity/OEM discounts.We provide FREE USPS First Class Shipping with Tracking – Not Economy Shipping
Renogy 60A MPPT Solar Charge Controller 12V/24V/36V/48V For RV Refurbished
𝟑𝟏°𝐅 𝐭𝐨 𝟏𝟏𝟑°𝐅 𝐅𝐮𝐥𝐥 𝐋𝐨𝐚𝐝: Outlast Competitors in 𝐄𝐱𝐭𝐫𝐞𝐦𝐞 𝐂𝐥𝐢𝐦𝐚𝐭𝐞𝐬! Add Bluetooth 𝐁𝐓𝟐 (𝐦𝐨𝐝𝐮𝐥𝐞 𝐬𝐨𝐥𝐝 𝐬𝐞𝐩𝐚𝐫𝐚𝐭𝐞𝐥𝐲) for phone alerts and energy reports.
60A MPPT Solar Panel Battery Charger Controller 12/24/48V LCD PV Regulator US
MPPT technology;. We have a professional solar inverter engineering team with more than 10 years of solar inverter R&D experience. We are committed to providing smart solar energy for areas where needs electricity.
Renogy 60A MPPT Solar Charge Controller 12V/24V/36V/48V 150V Max Input For RV
𝟑𝟏°𝐅 𝐭𝐨 𝟏𝟏𝟑°𝐅 𝐅𝐮𝐥𝐥 𝐋𝐨𝐚𝐝: Outlast Competitors in 𝐄𝐱𝐭𝐫𝐞𝐦𝐞 𝐂𝐥𝐢𝐦𝐚𝐭𝐞𝐬! Add Bluetooth 𝐁𝐓𝟐 (𝐦𝐨𝐝𝐮𝐥𝐞 𝐬𝐨𝐥𝐝 𝐬𝐞𝐩𝐚𝐫𝐚𝐭𝐞𝐥𝐲) for phone alerts and energy reports.
EPEVER MPPT Solar Charge Controller 10A 20A 30A 40A Solar Panel Regulator
(2022 Upgraded Version) EPEVER MPPT Solar Charge Controller 10 20 30 40 Amp ,12V/24V DC auto work ,Max PV 100V ,Solar Panels Max input charging for 12V battery or 24V battery , Common Negative Grounded . Suitable for Lead-acid (Sealed / Gel(AGM) / Flooded); Lithium(LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V)) and User-defined .Note : Warehouse in USA, our professional engineer local team supply solar system solutions and Tech-support services for you in time .Technical Data:(MPPT 40A Tracer4210AN as example ,please choose right model Tracer1206AN, Tracer2210AN, Tracer3210AN, Tracer4210AN as you need)Model: Tracer4210ANRated charge and discharge current :40 AmpNominal system voltage:12V/24V DC auto workMax. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery systemMax. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Battery type :Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V) , Lithium: LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V) and User-defined. (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )Grounding : Common negativeTracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃(100% input and output)Temperature: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)RS485 interface:5VDC/100mAController Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)Dimension:252*180*63mm ; weight :1.65 KGPackage List:1 X 40A MPPT Solar Charge Controller (Tracer4210AN )1 X Temperature sensor for controller（Model:RT-MF58R47K3.81A）1 X Manual (English)2022 EPEVER Tracer-AN series mppt solar charge controller is new upgraded version , Better funcations and advanced technology .Added Features ：Blacklight LCD Display ; More Safety Protection Functions ;Compatible with lead-acid and lithium-ion batteries too ;2022 Upgraded version support adjusting Lithium types by controller buttons directly .Product Features:Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.Protection function :•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection• Night Reverse Charging protection • Controller Overheating protection• Battery Reverse Polarity protection • Battery Over Voltage protection• Battery Over Discharge protection • Battery Overheating protection• Lithium Battery Low Temperature protection• Load Short Circuit protection • Load Overload protection•TVS High Voltage Transients protectionCONNECTION DIAGRAMBattery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)How to program for Lithium Battery parameters ？Via Remote Meter (Accessories needed: MT50)Via Phone APP [ Android or IOS], (Accessories needed：WIFI adapter or BLE adapter )Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U ) , Software download : EPEVER official website or read in manual .
Fit 10W/20W/30W Solar Panel Control Solar Controller With USB Output SAE Wire
Users don ’ t have to worry about positive (+) and negative (-).
100A 5200W 250VDC MPPT Solar Charge Controller 12V/24V/36V/48V Battery Regulator
Features: 【99.9% MPPT Efficiency】Advanced MPPT technology maximizes solar harvest for faster charging and higher energy output. 【True 100A Output】Delivers stable 100A continuous charging with intelligent cooling and reliable performance. 【250V PV Input】Supports up to 250VDC solar input and 5200W PV power for flexible panel configurations. 【Wide Battery Compatibility】Auto 12V/24V/36V/48V. Compatible with LiFePO4, Lithium-Ion, AGM, Gel, Flooded, SLA, and User batteries. Lithium activation supported. 【APP Monitoring】Monitor charging status, battery data, and system performance via optional Bluetooth module and SolarMate APP. 【Full Protection】LCD display, 5 load modes, RS485 Modbus communication, and protection against reverse polarity, overload, short circuit, overcharge, and over-temperature.