Ultra Custom Pools

Item Category: Indoor Air Quality & Fans

IronRidge XR-1000-170M Rail Mill XR1000 PRE-CUT

IronRidge XR-1000-170M Rail Mill XR1000 Series 14ft 2in PRE-CUT. This is an XR-1000-170M rail cut in half. Use the XR1000-BOSS-01-M1 to splice the halves together. XR Rails® are the structural backbone of IronRidge® pitched, flat and ground-based arrays.

IronRidge XR100-BOSS-01-M1 BOSS Bonded Structural Splice

Stellavolta.com is an authorized dealer and we only sell new products. Review this product’s handling time by clicking on the “Shipping and Payments” tab above. Ships primarily via USPS, however, we may ship UPS Ground or FedEx Ground. Faster shipping options available. We accept PayPal and all major credit cards. IronRidge XR100-BOSS-01-M1 BOSS Bonded Structural Splice The BOSS™ (Bonded Structural Splice) provides a truly seamless, hidden connection for XR Rails. Built-in, one-piece springs feature bonding teeth that bite inside the rail, creating a bonded rail connection and meeting all UL standards without any extra tools or hardware. In addition, BOSS™ eliminates installation restrictions. Place it anywhere except the outside cantilever. Exchanges or Returns Please contact us before returning or exchanging an item to receive a return authorization (RA). Items returned to us without receiving a return authorization will be returned to you at your expense. We accept exchanges and returns for unopened items or damaged/defective products within 30 days of receipt of shipment. A 20% restocking fee may apply to multiple quantity returns or large ticket items. A 20% restocking fee will apply for all products that ship freight. Exchanges and returns are not accepted after 30 days of receipt of shipment. Unopened Products To make an exchange or return for an unopened product, please contact us and obtain a Return Authorization. If the exchanged or returned product is unopened with all original accessories, manuals, packaging, and/or shrink wrap, you will be responsible for return shipping. If the product was sold with free shipping, shipping charges to deliver the item will be deducted from the refund amount. A refund to your method of payment will be processed within one week of receiving an authorized return minus any applicable shipping charges. Damaged/Defective Products To make an exchange or return for a damaged/defective product, please contact us and obtain a Return Authorization. If the product is returned for being damaged/defective, we will provide a return shipping label for domestic shipping costs. If we test and confirm the product is damaged/defective and receive the product along with all original accessories, manuals, and packing, we will provide a refund for the purchase price of the product, plus domestic shipping charges, if any, assessed at the time of purchase. International shipping charges, if any, will not be reimbursed. A refund to your method of payment will be processed within one week of receiving an authorized return. If we test and confirm the product is in full working order, a refund will not be provided and you will be responsible for providing a return shipping label to have the product returned to you.

IronRidge XR100-BOSS-01-M1 BOSS – Bonded Splice (NEW CASE OF 20 UNITS)

The IronRidge XR100-BOSS-01-M1 BOSS Bonded Structural Splice is a high-quality bonding solution for solar panel installations. Made by the trusted brand IronRidge, this silver-colored bonded splice is designed to provide a secure and reliable connection for solar panels. With a new case of 20 units, this product offers a convenient and efficient way to bond structural components together for a seamless solar panel installation. The IronRidge XR100-BOSS-01-M1 is a crucial component for ensuring a strong and durable solar panel system.

Micro Hydro PMA Generator, Pelton Wheel 1k-3k Watts, 12-36 VDC Motenergy ME1016

Pelton Wheel and PMA Generator set. These two products were designed to work with 1000 to 3000 watts output, for charging batteries in Home Power systems. Note that this is a 3-Phase, AC generator and you need to purchase your own 3-phase full wave rectifier to convert the AC output to DC for charging batteries, from 12 to 36 VDC after your rectifier bridge. You can find 3-phase rectifiers and Charge Controllers on eBay from companies like Coleman Air. Pelton Wheel Part Number ME0903. PM Generator ME1016 Rev A. The Pelton wheel has die cast aluminum cups for many years of product life.. There are 12 cups. The generator uses Ceramic magnets and has over 85% efficiency, much hither than a standard car alternator which is usually 60%. The Pelton Wheel mounts directly onto the PM Generator shaft with 4 x M5 mounting bolts (bolts not included but can be purchased from a local hardware store). Designed for use on your own Pico Hydro Projects. You will also need to build a water box and add a nozzle, plus you will need a 3-phase full wave rectifier and a charge controller. Easily provides 1000 watts of power with one nozzle, 2000 watts with two nozzles. With one 3/4 inch nozzle and 28 PSI (65 feet), 80 gallons per minute, it provides 500 watts output. You can add up to 4 nozzles. For reference, here is a quick calculation for an approximation of the available power at your site: Flow in GPM x Height in Feet x 0.18 x 0.5 = Output Power This is a very durable wheel and there are no brushes to wear-out on the AC generator. Shipping weight of 20 pounds. Comes in corrugated box measuring 13 x 13 x 13 inches. International buyers should note that you may have to pay some duty or VAT due when the goods arrive in your country. Ebay and Paypal does not charge this duty and VAT when you check-out. The items are also sold separately on eBay

Micro Power Hydro PMA Generator ME1016, 1000-3000 Watts, 12-36 VDC, Motenery Inc

This is a 3-Phase Permanent Magnet Generator.. It is designed to work at 1000 to 3000 watts output, for charging batteries in Home Power systems. Note that this is a 3-Phase, AC generator and you need to purchase your own 3-phase full wave rectifier to convert the AC output to DC for charging batteries, from 12 to 36 VDC after your rectifier bridge. You can find 3-phase rectifiers and Charge Controllers on eBay from companies like Coleman Air. It is a “Y” connected winding and the Neutral is not brought out of the generator. PM Generator ME1016 Rev A. It comes with an aluminum Adapter to fit our Pelton Wheel, Model ME0903 (the wheel is not included in this auction). The generator uses 12 Ceramic Magnets and has over 85% efficiency, much higher than a standard car alternator which is usually 60%. Designed for use on your own Pico Hydro Projects. You will also need to build a water box and add a nozzle, plus you will need a 3-phase full wave rectifier and a charge controller, plus a Turgo or Pelton Wheel. Easily provides 1000 watts of power with one nozzle, 2000 watts with two nozzles. With one 3/4 inch nozzle and 28 PSI (65 feet), 80 gallons per minute, it provides 500 watts output. You can add up to 4 nozzles. The output voltage is directly proportional to the speed. A speed of 1000 rpm minimum is required to charge 12 VDC batteries. Double the speed and you get double the voltage. Remember that as the generator is loaded, you will need to keep the speed at 1000 rpm to provide 1000 watts. This is a very durable generator and there are no brushes to wear-out. The shaft is stainless steel, and there is a bearing seal on the shaft. Shipping weight of 17 pounds. Comes in corrugated box measuring 10 x 10 x 10 inches. International buyers should note that you may have to pay some duty or VAT due when the goods arrive in your country. Ebay and Paypal does not charge this duty and VAT when you check-out. The items are also sold separately on eBay

MIDNITE SOLAR MNPV6 (PV COMBINER BOX ONLY) SOLAR WIND TURBINE WIND GENERATOR

Midnite Solar MNPV6 PV Combiner Box(BREAKERS AND FUSE HOLDERS ARE SOLD SEPARATELY) MidNite Solar MNPV6 PV Combiner Box *** THIS IS THE FOR COMBINER BOX ONLY….THE BREAKERS AND FUSE HOLDERS ARE SOLD SEPARATELY The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: Aluminum rain proof type 3R enclosureInternal plastic injection molded dead front coverKnock outs for lightning arrestorsKnock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectorsUses 150VDC & 300VDC breakers or 1000VDC fuses depending on model numberETL listed to UL1741 for use in the US and Canada Adaptable for two separate inverters or charge controllers on certain models Description: This is the Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) (The most popular combiner in North America) Gray aluminum type 3R rainproof enclosure with insulated deadfront, will accept six 150VDC (MNEPV) breakers or four 600 VDC fuse holders. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bar for fuses. Photos show MNPV6 with either breakers or fuses. (Breakers/fuse holders sold separately) Type 3R environmental ratingWarranty 5 years Listed by ETL for US & CanadaMade in the USA MidNite Solar MNPV6 Combiner Specifications: Enclosure rating: Outdoor Rainproof NEMA 3R Enclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Four strings with fuses, six strings with 150 volt breaker Maximum number of output circuits: Two Wire range for string input: 14-6 AWG Maximum OCPD rating: 30 amp with fuses, 63 amps with 150 volt breakers and 50 amps with 300 volt breakers Maximum outputamps: 80 amps for fused, 120 amp for breakers Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV6 Combiner Dimensions: Size: 13.5″L x 8″W x 3.5″DShipping: 14″L x 9″W x 4″D Weight: 4 Lbs Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!MidNite Solar MNPV6 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: —Aluminum rain proof type 3R enclosure —Internal plastic injection molded dead front cover —Knock outs for lightning arrestors —Knock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectors —Uses 150VDC & 300VDC breakers or 1000VDC fuses depending on model number —ETL listed to UL1741 for use in the US and Canada — Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) (The most popular combiner in North America) Gray aluminum type 3R rainproof enclosure with insulated deadfront, will accept six 150VDC (MNEPV) breakers or four 600 VDC fuse holders. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 ampbar for fuses. Photos show MNPV6 with either breakers or fuses. Breakers/fuse holders sold separately. —· Type 3R environmental rating —· [Warranty – 5 yrs.] (http://www.midnitesolar.com/pdfs/MIDNITE_SOLAR_INC_Warranty.pdf) —· Listed by ETL for US & Canada —· Made in the USA MidNite Solar MNPV6 Combiner Specifications: Enclosure rating: Outdoor Rainproof NEMA 3R Enclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Four strings with fuses, six strings with 150 volt breaker Maximum number of output circuits: Two Wire range for string input: 14-6 AWG Maximum OCPD rating: 30 amp with fuses, 63 amps with 150 volt breakers and 50 amps with 300 volt breakers Maximum outputamps: 80 amps for fused, 120 amp for breakers Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV6 Combiner Dimensions: Size: 13.5″L x 8″W x 3.5″D Shipping: 14″L x 9″W x 4″D Weight: 4 Lbs MidNite Solar MNPV6 PV Combiner MidNite Solar MNPV6 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: Aluminum rain proof type 3R enclosureInternal plastic injection molded dead front coverKnock outs for lightning arrestorsKnock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectorsUses 150VDC & 300VDC breakers or 1000VDC fuses depending on model numberETL listed to UL1741 for use in the US and Canada Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) (The most popular combiner in North America) Gray aluminum type 3R rainproof enclosure with insulated deadfront, will accept six 150VDC (MNEPV) breakers or four 600 VDC fuse holders. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 ampbar for fuses. Photos show MNPV6 with either breakers or fuses. Breakers/fuse holders sold separately. · Type 3R environmental rating· Warranty – 5 yrs.· Listed by ETL for US & Canada· Made in the USA MidNite Solar MNPV6 Combiner Specifications: Enclosure rating: Outdoor Rainproof NEMA 3REnclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Four strings with fuses, six strings with 150 volt breaker Maximum number of output circuits: Two Wire range for string input: 14-6 AWG Maximum OCPD rating: 30 amp with fuses, 63 amps with 150 volt breakers and 50 amps with 300 volt breakers Maximum outputamps: 80 amps for fused, 120 amp for breakers Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV6 Combiner Dimensions: Size: 13.5″L x 8″W x 3.5″DShipping: 14″L x 9″W x 4″D Weight: 4 Lbs Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! MidNite Solar MNPV6 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: Aluminum rain proof type 3R enclosureInternal plastic injection molded dead front coverKnock outs for lightning arrestorsKnock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectorsUses 150VDC & 300VDC breakers or 1000VDC fuses depending on model numberETL listed to UL1741 for use in the US and Canada Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) (The most popular combiner in North America) Gray aluminum type 3R rainproof enclosure with insulated deadfront, will accept six 150VDC (MNEPV) breakers or four 600 VDC fuse holders. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 ampbar for fuses. Photos show MNPV6 with either breakers or fuses. Breakers/fuse holders sold separately. · Type 3R environmental rating· Warranty – 5 yrs.· Listed by ETL for US & Canada· Made in the USA MidNite Solar MNPV6 Combiner Specifications: Enclosure rating: Outdoor Rainproof NEMA 3REnclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Four strings with fuses, six strings with 150 volt breaker Maximum number of output circuits: Two Wire range for string input: 14-6 AWG Maximum OCPD rating: 30 amp with fuses, 63 amps with 150 volt breakers and 50 amps with 300 volt breakers Maximum outputamps: 80 amps for fused, 120 amp for breakers Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV6 Combiner Dimensions: Size: 13.5″L x 8″W x 3.5″DShipping: 14″L x 9″W x 4″D Weight: 4 Lbs