HOPPE Mortise Lock Single Point 1-3/4″ Backset With Satin Nickel Cylinder
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset With Satin Nickel Profile Cylinder IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset
IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),
Hoppe Mortise Single Point Lock Rotation Limiter 1 Inch Deadbolt Throw 60/92
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. IMPORTANT NOTICE: This single point mortise lock CANNOT used to repair a multipoint lock There are no interchangeable parts from this lock that can be used on other locks. Hoppe manual single point mortise lock (SPL) Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks. 16mm Hoppe 45/92 Single Point Lock (SPL) 1″ Deadbolt, new style with locking handle Deadbolt Throw: 1 inch (25 mm). Face Plate Width: 5/8 (16 mm) Face Plate Length: 10-13/16 inch. Faceplate Screw Holes: 10-1/8 inch. Faceplate Material: Stainless Steel Backset: 1-3/4 inch (45 mm) – distance from edge of face plate to center of lock handle. All Current Model Single Point Locks from HOPPE w/ Rotation Limiter (Lever is fixed and does not move after door is locked) 11517475 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517505 – 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517517 – 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends (Please contact office if needing one of the locks not currently linked to our site)Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below. HOPPE Screws for Installation: 8785695 – Screw 1-3/8″ ( 35mm ) 8mm Head – Stainless Steel 8785687 – Screws, 3/4″ (20mm ) 8mm Head – Stainless Steel Helpful Articles How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn’t Retract How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock
HOPPE Mortise Lock, Single Point 1-3/4″ Backset With Brass Profile Cylinder
IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lock. Hoppe manual single point mortise lock (SPL). H OPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset With Brass Profile Cylinder.
HOPPE Mortise Lock, Single Point 1-3/4″ Backset With Black Profile Cylinder
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset With Black Profile Cylinder IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),