Ultra Custom Pools

Item Tag: 12V/24V

10/20/30/40/60A PWM Solar Panel Battery Regulator Charge Controller USB 12/24V

10A / 20A / 30A / 40A / 60A PWM Solar Panel Battery Regulator Charge Controller 12V or 24V Batteries with Dual USB Output – Blue CaseThis PWM Solar Battery Charge Controller automatically manages and regulates the voltage and current to the battery from the solar panel(s). It incorporates short-circuit, open-circuit, reverse polarity, and overload protection in order to ensure that the batteries are not overcharged and that power isn’t discharged from the batteries to the solar panels during shaded or dark conditions and drain the batteries. It comes with USB ports to charge your phone and other electronic devices directly from the controller.This solar charge controller is perfect for smaller home, cabin, RV and other remote and portable solar systems.FeaturesThis controller is designed for use only with 12V and 24V lead-acid batteries. It cannot be used with lithium-ion, nickel-cadmium or other battery types.Regulates the voltage from the solar panels going to the batteries.Built-in industrial master chip to control the charge and discharge process with adjustable parameters to prolong the battery life cycle and stabilize power to the load.3-stage PWM charge management with short-circuit protection, open-circuit protection, and reverse polarity protection.Dual USB outputs with 5V/2A maximum power (across both outputs) can charge mobile phones, tablets, and other USB-powered devices.LCD display with backlight function displays status and parameters.Dual MOSFET reverse current protection, low power dissipation.Easy to install and operate, suitable for home, industrial, commercial, remote and portable solar energy systems.Models for !0A, 20A, 30A, 40A and 60A maximum input currentSpecificationsSize: Approx. 13.3 x 7 x 3.5 cm/ 5.24 x 2.76 x 1.38 inch (LxWxH) (10A, 20A and 30A models) Approx. 18.8 x 9 x 4.7 cm/ 7.4 x 3.54 x 1.85 inch (LxWxH) (40A & 60A models)Battery Voltage: 12V/ 24V (Auto recognition)Input Charging Current: 10A / 20A / 30A / 40A / 60A dependent upon the model chosen. The maximum panel output current should be about 25% less than the controller’s maximum input current rating. For example, with a single 6A 100W panel, use the 10A model. Two 6A panels (12A total) should use the 20A model. If in doubt, use the higher current model, i.e. if the maximum panel output current is 9A, use the 20A model rather than the 10A model. Maximum Discharge Current: 10A (10A, 20A and 30A models) 20A (40A model) 30A (60A model)Internal power consumption: =10mAOver Charge Protection:B01 Sealed: 14.4V/28.8VB02 Gel: 14.2V/28.4VB03 Flood: 14.6V/29.2VOver Charge Float: 13.7V/27.4VCharge Recovery Voltage: 12.6V/25.2VOver-discharge Protection: 10.7V/21.4VOver-discharge Recovery: 12.6V/25.2VUSB output: 5V/2A12V batteries should be used with solar panels capable of generating 18V-25V With 12V batteries, the maximum panel voltage must not exceed 25V24V batteries should be used with solar panels capable of generating 36V-50V With 24V batteries, the maximum panel voltage must not exceed 50VMaximum Power Input:10A Model 12V: 120W (MAX), 24V: 240W (MAX)20A Model 12V: 240W (MAX), 24V: 480W (MAX)30A Model 12V: 360W (MAX), 24V: 720W (MAX)40A Model 12V: 520W (MAX), 24V: 1040W (MAX) 60A Model 12V: 780W (MAX), 24V: 1560W (MAX)Operating Temperature: -35 ~ +60CStorage Temperature: -35 ~ +60CPackage Includes:1X (1 Piece) 10A, 20A, 30A, 40A or 60A PWM Solar Charge Controller (Amperage selected at checkout) – Blue Case (10A, 20A, 30A and 40A models) or White Case (60A model) Link to online Installation and Operating InstructionsNOTE: The solar panel and battery in the photo are shown to illustrate the controller’s interconnections only. They are not included with the charge controllerWe also carry these PWM solar charge controllers with a BLACK faceplate rather than BLUE: 10/20/30A PWM Solar Panel Battery Regulator Charge Controller USB 12V 24V Black Faceplate.Get it faster! Stocks and ships from our US Colorado office for quick delivery.Contact us for quantity/OEM discounts.We provide FREE USPS First Class Shipping with Tracking – Not Economy Shipping

MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V

MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V ☀️ 30A/60A/100A SOLAR CHARGE CONTROLLER: Our Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A/60A/100A; dual USB output 5V / 2.5A, Built-in industrial microcontroller for automatically management, memorizing various parameters set by the user and the data won’t be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. ☀️ FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc. ☀️ 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery. ☀️ MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. ☀️ OUR SALES SERVICE: Our Solar charge controller built-in instructions, please refer to the operating instructions to learn how to install and use. If you are not satisfied with your order, We have professional customer service personnel who can solve your problems online 24/7. Specifications: Color: Blue / Orange Material: ABSRated Voltage: 12V/24VCharging Mode: PWM+MPPTRated Current: 30A/60A/100AMax PV VOTAGE: 50VMax PV Input Power: 360W(12V) 720(24V)Display: LCD screenSelf-Consumption: <10MAOvercharge Protection: 14.4V / 28.8VOvercharge Float charge: 13.7V / 27.4VCharge Recovery Voltage: 12.6V / 25.2VOver Discharge Protection: 10.7V / 21.4VOver Discharge Recovery: 12.6V / 25.2VDual USB Output: 5V / 2A (charge mobile phone, iPad, etc.) Common Questions Q: How many watts (W) of solar panels can be connected.A: 30A – 720W, 60A – 1440W, 100A – 1680W Q: Does this controller support lithium batteries?A: The new controller can be used for lead-acid batteries and lithium batteries. If you charge lithium batteries, you must set the charging parameters after connecting to the power. Please refer to the manual for details. Q: My solar panel is 36V 200W, can I charge 12V battery?A: To charge a 12V battery, the working voltage of the solar panel can be between 17V and 23V, and for a 24V battery, the working voltage of the solar panel can be between 36V and 46V. Q: Can the inverter be connected to the load side of the controller?A: Please connect the inverter directly to the battery and not to the load terminal of the controller. Q: Does the controller have a requirement for battery capacity?A: No, as long as the voltage corresponds to it (but the maximum current of the board and the battery capacity should correspond). For example, the current of the solar panel is 5 amps, the battery capacity is preferably 50 AH, the current of the solar panel is 10 A, and the battery capacity is preferably 100 AH. Do not use a large board to charge a small battery, which may be dangerous. Q: How do you connect the solar panels, batteries, and controllers?A: Please be sure to connect the battery first (to ensure that the battery is fully charged), then connect the solar panel. When disassembling, please remove the solar panel first, then remove the battery, please connect it exactly as this order, otherwise the controller and other components probably. Working temperature: -35 ℃ -60 ℃12V fits 18V solar panel, 24V fits 36V solar panel12.0 volt lead acid battery correspondingThe float voltage is set to: 13.6The recovery discharge voltage is set to: 12.6The discharge cut-off voltage is set to: 10.712.8 volt lithium iron phosphate battery correspondingThe float voltage is set to: 14.6The recovery discharge voltage is set to: 13.6The discharge cut-off voltage is set to: 11.011.1 volt lithium battery correspondingThe float voltage is set to: 12.6The recovery discharge voltage is set to: 11.6The discharge cut-off voltage is set to: 9.6 30A/60A/100A Our Solar Charge controller compatibility with 12V and 24V system, Discharge Current: 30A/60A/100A; dual USB output 5V / 2.5A, Built-in industrial microcontroller for automatically management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Functional 3 Stage PWM ControlFully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery. Intelligent ProtectionBuilt-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. Functional LCD ScreenEasy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc. Package includes: 1 x MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 30-100A 12V/24V (Please Select Amperage At Above Menu)Shipping Information: Your item Ships Same Day to 1 Business Day from our California Location.

100A MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 12/24V US

100A MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 12/24V US 100% brand new and high-quality made.Adopts advanced maximum power point tracking (MPPT/PWM) technology, high quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency.Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions.Dual USB output, the maximum current is 2.5A. Equipped with all necessary protections, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat.Package Includes:1x Solar Panels Battery Charge Panel1x User Manual Shipping Policy Returns Contact Us All orders will be processed and shipped within 12 hours, Monday to Friday in most cases.Most packages will be shipped via USPS First Mail, it usually takes 3-5 days for delivery.A tracking number will be emailed to you upon shipment. Please note that USPS does not update tracking information location by location.We only ship to address that you input during Paypal checkout. Buyers are responsible for wrong or undeliverable address. Returns will be accepted within 30 days after delivery. However, if the item is damaged upon arrival, buyers must contact us within 3 days after delivery for any refund or replacement.Returns will not be accepted if buyers caused any damages to the item.Refunds are given as Exchange or Money Back. Please be patient when contacting us, all messages will be replied within 12 hours.Please let us know immediately if a package is damaged upon arrival.Feel free to contact us if you’d like to combine shipping on your purchases.We appreciate your feedback and we will send buyers positive feedback after a shipment has been processed.Customer satisfaction is significant to us. If you are dissatisfied with a transaction for any reason. Before taking any action, please contact us through eBay and we will do everything we can to help you. Listing and template services provided by inkFrog