#10-24 x 3/4″ 18-8 Stainless Steel Coarse Thread Coupling Nuts
Diameter: #10 Length: 3/4″ Material: Stainless Steel Driver Type: 3/8″ Wrench Thread Size: 24 (Coarse) Hardness: 18-8 Type: Coupling Nut A coupling nut is a long nut tapped from each side to meet in the middle, rather than all the way through in the same direction, used to connect two threaded rods end to end.
#6 x 3/4″ 18-8 Stainless Steel Slotted Flat Head Sheet Metal Screws (24 pcs.)
Diameter: #6 Length: 3/4″ Material: Stainless Steel Head Style: Flat (Slotted) Thread Length: Full Hardness: 18-8 Type: Sheet Metal Screw Box of 24. A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
#10 x 1″ Black Painted 18-8 Stainless Steel Phillips Pan Head Sheet Metal Screws
Diameter: #10 Length: 1″ Material: Stainless Steel Finish: Painted Black Head Style: Pan (Phillips) Thread Length: Full Hardness: 18-8 Style: Painted Head Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
1/4″ x 1-1/2″ Solid 18-8 Stainless Steel Rings (5 pcs.)
Diameter: 1/4″ Inside Diameter: 1-1/2″ Material: Stainless Steel Hardness: 18-8 Type: Ring Box of 5.
7/16″-20 18-8 Stainless Steel Fine Thread Acorn Cap Nuts (5 pcs.)
Diameter: 7/16″ Diameter 2: 23/32″ Thickness: 23/32″ Material: Stainless Steel Driver Type: 5/8″ Wrench Thread Size: 20 (Fine) Shape: Acorn Hardness: 18-8 Type: Cap Nut Box of 5. A closed nut having a dome-like cap over the back, protruding part of the engaged screw or bolt. Also called an acorn nut.
1/4 x 1 Inch 18-8(304) Stainless Steel Fender Washers, Black Zinc Plated Flat
Fastener Size 1/4. Wide Application: Suitable for various automotive, industrial, and DIY projects where flat washers are required. Exterior Finish Stainless Steel. Material Stainless Steel. Washer Type Flat.
3/32″ 18-8 Stainless Steel E Clips (30 pcs.)
Diameter: 3/32″ Material: Stainless Steel Hardness: 18-8 Type: E-Clip Box of 30. An e-clip is used by industrial laypersons and military mechanics to refer to any fasteners that depend upon spring deformation to remain in place. They are sized to provide an interference fit onto a groove or land when in use, such that they must be elastically deformed in order to install or remove them.
#8 x 1/2″ Black Painted 18-8 Stainless Steel Hex Washer Head Sheet Metal Screws
Diameter: #8 Length: 1/2″ Material: Stainless Steel Finish: Painted Black Head Style: Hex Washer (Slotted|Hex) Thread Length: Full Hardness: 18-8 Style: Painted Head Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
Phillips Pan Head Sheet Metal Screws #14 x 2-1/2″ 18-8 Stainless Steel 100 PACK
1/4″ x 17/64″ x .02″ Polished 18-8 Stainless Steel AN Washers (15 pcs.)
Diameter: 17/64″ Diameter 2: .02″ Thickness: 1/16′” Material: Stainless Steel Finish: Polished Hardness: 18-8 Nominal Size: 1/4″ Style: AN Type: Flat Washer Box of 15. A flat washer is a thin, usually round, plate with a hole in the middle that is normally used to distribute the load of a threaded fastener. USS flat washers have a large, wider body. SAE flat washers are machined to a tighter specification and have a smaller outside diameter.