nsulated Inline Splice Connector QMS-D2/0-1, 2/0-6 AWG Wire Range, 600V 2/0 AWG
Nsulated Inline Splice Connector QMS-D2/0-1, 2/0-6 AWG Wire Range, 600V Dual Rated for Copper and Aluminum, Pre-Filled with Oxide Inhibitor, UL Listed, Black. Precise Installation Specifications: For a secure and compliant connection, this model requires a specific wire strip length of 32.8 mm.
nsulated Inline Splice Connector QMS-D2/0-1, 2/0-6 AWG Wire Range, 2/0 AWG
Nsulated Inline Splice Connector QMS-D2/0-1, 2/0-6 AWG Wire Range, 600V Dual Rated for Copper and Aluminum, Pre-Filled with Oxide Inhibitor, UL Listed, Black. Precise Installation Specifications: For a secure and compliant connection, this model requires a specific wire strip length of 32.8 mm.
2/0 Gauge AWG 24″ Battery Cables Solar Marine Inverter MTW Copper – 1/2″ Lugs ea
Fine Strand MTW Copper. 2/0 Gauge AWG. For – Solar Marine Inverter. 1/2″ Hole Ring Lugs – Both sides.
2/0 AWG Copper 12′ Black Battery Cable 3/8 & 5/16 Lug Wire Car Marine Inverter
Conductor: Fully annealed stranded bare copper, Class K, per ASTM B-172. Each Pure electrolytic fine stranded copper conductor. WELDING CABLE CONSTRUCTION These will be at least 12 feet but no longer than 13 feet.
6 – 2/0 AWG 600-Volt 2-Ports Multi Tap Connector, Insulated Single Sided Entry
6 – 2/0 AWG 600-Volt 2-Ports Multi Tap Connector, Insulated Single Sided Entry
6 FT 2/0 AWG Custom Battery Cables Solar, Marine, Power Inverter 3/8 LUGS
6 FT 2/0 AWG Custom Battery Cables Solar, Marine, Power Inverter 3/8 LUGS (AUCTION IS FOR 1 CABLE ONLY) EACH END IS CRIMPED WITH A HYDRAULIC AIR CRIMPER 6 TON FORCEEACH END IS COVERED WITH 3:1 GLUE HEAT SHRINK FOR SEALING .BUILT FROM CENTER TO CENTER CABLE LUG HOLE.ABOUT THE CABLE USED: ConductorsRope-lay, bunch-stranded 30 AWG TINNED copper conductor tinned ASTM Class K copperVoltage Rating600 V; AWM Style 10269 — 1,000 VInsulation & JacketInsulated/Jacketed with high-quality PVC compoundResistance PropertiesResistant to battery acid, crushing force, diesel fuel, engine coolant, engine oil, ethanol, extreme temperatures, flame, gasoline, power-steering fluid, and transmission fluid sunlight resistance rating 60°C (140°F) oil resistant temperature ratingTemperature RangeEnhanced Temperature Rating-50°C (-58°F) to 105°C (221°F) Dry; 75°C (167°F) Wet Solar Battery Bank ArrayForklift Charging CablesPower Inverter CablesWelding Cable LeadsAmplifier Wiring for cars/trucksALSO CHECK OUT OUR OTHER AUCTIONS FOR OTHER BATTERY CABLES
15 INCH 2/0 AWG Custom Battery Cables Solar, Marine, Power Inverter 5/16 LUGS
15 INCH 2/0 AWG Custom Battery Cables Solar, Marine, Power Inverter 5/16 LUGS (AUCTION IS FOR 1 CABLE ONLY) EACH END IS CRIMPED WITH A HYDRAULIC AIR CRIMPER 6 TON FORCEEACH END IS COVERED WITH 3:1 GLUE HEAT SHRINK FOR SEALING .BUILT FROM CENTER TO CENTER CABLE LUG HOLE.ABOUT THE CABLE USED: ConductorsRope-lay, bunch-stranded 30 AWG TINNED copper conductor tinned ASTM Class K copperVoltage Rating600 V; AWM Style 10269 — 1,000 VInsulation & JacketInsulated/Jacketed with high-quality PVC compoundResistance PropertiesResistant to battery acid, crushing force, diesel fuel, engine coolant, engine oil, ethanol, extreme temperatures, flame, gasoline, power-steering fluid, and transmission fluid sunlight resistance rating 60°C (140°F) oil resistant temperature ratingTemperature RangeEnhanced Temperature Rating-50°C (-58°F) to 105°C (221°F) Dry; 75°C (167°F) Wet Solar Battery Bank ArrayForklift Charging CablesPower Inverter CablesWelding Cable LeadsAmplifier Wiring for cars/trucksALSO CHECK OUT OUR OTHER AUCTIONS FOR OTHER BATTERY CABLES
10Pack Battery Terminal Cover for Red and Black 4 AWG – 2/0 AWG
Application: The insulated silicone boot cover can work well with battery stud and power junction block, suitable for automotive, car, truck, marine boat, etc.
LOT OF 15 2/0 AWG Cable Lugs Ring Terminals Battery Wire Connectors
THIS SALE IS FOR 1 NEW STARTER FOR 07-14 NISSAN ALTIMA, 09-14 MAXIMA, 09-14 MURANO, 11-15 QUEST
18 INCH 2/0 AWG Custom Battery Cables Solar, Marine, Power Inverter 3/8 LUGS
18 INCH 2/0 AWG Custom Battery Cables Solar, Marine, Power Inverter 3/8 LUGS (AUCTION IS FOR 1 CABLE ONLY) EACH END IS CRIMPED WITH A HYDRAULIC AIR CRIMPER 6 TON FORCEEACH END IS COVERED WITH 3:1 GLUE HEAT SHRINK FOR SEALING .BUILT FROM CENTER TO CENTER CABLE LUG HOLE.ABOUT THE CABLE USED: ConductorsRope-lay, bunch-stranded 30 AWG TINNED copper conductor tinned ASTM Class K copperVoltage Rating600 V; AWM Style 10269 — 1,000 VInsulation & JacketInsulated/Jacketed with high-quality PVC compoundResistance PropertiesResistant to battery acid, crushing force, diesel fuel, engine coolant, engine oil, ethanol, extreme temperatures, flame, gasoline, power-steering fluid, and transmission fluid sunlight resistance rating 60°C (140°F) oil resistant temperature ratingTemperature RangeEnhanced Temperature Rating-50°C (-58°F) to 105°C (221°F) Dry; 75°C (167°F) Wet Solar Battery Bank ArrayForklift Charging CablesPower Inverter CablesWelding Cable LeadsAmplifier Wiring for cars/trucksALSO CHECK OUT OUR OTHER AUCTIONS FOR OTHER BATTERY CABLES