Ultra Custom Pools

Item Tag: 24 Volts

Versatile 2-Channel Relay Switch with Secure RF Control for Garage & Lights

Its weatherproof design and flexible functionality, combined with easy installation and programming, make it ideal for various applications. Dual Operation Modes: Two independent relay channels can work together in latching mode for polarity reversing or operate individually for managing different electronics (such as garage doors and entry lights).

24V 100Ah LiFePO4 Lithium Battery Deep Cycle 100A BMS For RVs Solar Off-grid

WERCHTAY LiFePO4 batteries are designed for boats, home off-grid charging, camping and outdoor activities. They can be cycled 4,000-15,000 times and have a life expectancy of up to 10 years. Due to their safety and stability, LiFePO4 batteries can completely replace traditional lead-acid batteries. Its weight is only 10.4kg, and this model adopts prismatic lithium iron phosphate battery with better stability, higher energy density and lighter weight, which makes the battery with high temperature resistance, high power output and low self-discharge. If you need to be interested in our products, welcome to contact us at the first time!.

Mini Wireless Remote Control Switch DC 12V 24V 1 Channel RF Relay Latched Swi

433 Mhz universal wireless remote control switch: input voltage DC 5.5~24V, working mode is superheterodyne.Transmission distance: about 50~100m (open space), if the transmission distance is not ideal, the antenna inside the receiver box can be pulled outside through the round hole of the box, which will be more conducive to reception.Support remote control type: EV1527 learning code. Supports up to 20 remote controllers (if the remote controller is lost, buy one to pair with the PCB board.)PCB size: 47 x 26 x 18 mm (L,W,H), output terminals: NO , NC , COM.It supports remote and wireless control of your car battery power, garage doors, electronic doors, appliances and other remote control devices, appliances, motorcycle alarms, car sunroofs, heating systems, and more. Bring you a brand new remote control experience, please don’t miss it.EASY TO USE: There are 4 function modes: Momentary, Toggle，Latched and Delay, please refer to the details page below for pairing. We recommend using the Latched Mode, which uses one button for ON and one button for OFF. Product Description DC 5.5-24v Single Channel Controller Technical Parameters Working Voltage : DC 6V/12V/24V Modulation Mode:ASK Matching Mode: Intelligent Learning Code 1527. Quiescent Current:5mA Maximum load power: 300W RF Frequency: 433MHz Wiring method: NC COM NO Circuit Board Size: 26 * 47 * 18mm Output: single-channel passive switch quantity output Max Relay Contact Current : DC 20A/AC 5A About Working Modes Momentary: Press the remote button , the relay connects, release the remote button , the relay dis-connects. Toggle: Press once the remote button, the relay connects , press twice the remote button , the relay dis-connects . Latching: Press the remote button ON, the relay connects, press the remote button OFF, the relay dis-connect. Delay Mode: Press the remote button , the output terminal of the receiver will be powered on for a certain time (5s/10s/15s/20s), and the output terminal of the receiver will be powered off. Reset:Factory reset, this will erase all paired remotes! Please note:We recommend using the Latching Mode, which uses one button for ON and one button for OFF. If you want to change to another mode, please follow the instructions on the product page to reset the product and select the working mode pairing. Working mode settings 1.Reset : Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out. 2.Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds . 3.Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds. 4.Latched Mode :Press the receiver button 3 times, the receiver indicator light is always on, the receiver enters the code matching state, and then press the remote control button, the receiver indicator light flashes and then stays on, then press another button on the remote control, after the code is successful, the indicator light goes out. 5.Delay Mode : Press a certain number of times (4 times correspond to 5s/ 5 times correspond to 10s/ 6 times correspond to 15s/ 7 times correspond to 20s) to press the receiver button, the receiver indicator light is always on, the receiver enters the code matching state, then press the key of the remote controller, and the indicator light will go out after the code matching is successful. Please note:We recommend using the Latched Mode, which uses one button for ON and one button for OFF. If you want to change to another mode, please follow the instructions on the product page to reset the product and select the working mode pairing.