Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Water is kept in check between 1/8″ and 3/8″.

RULE 25SA Bilge Pump,ABS,Nylon,SS,12VDC,3/4″ NPS 406R84

Electric Bilge Pump, Amps 1.8 A, Body Material ABS, Nylon, Stainless Steel, Duty Cycle Continuous These electric bilge pumps are battery powered and have a higher flow rate than hand-operated bilge pumps when used to drain a boat’s bilge water. They can be connected to a switch or control box for automatic start when the water rises to a certain level in the bilge, and automatic stop when the water is drained down in the bilge to a preset level.Electric bilge pumps are battery powered and have a higher flow rate than hand-operated bilge pumps when used to drain a boat’s bilge water. They can be connected to a switch or control box for automatic start when the water rises to a certain level in the bilge, and automatic stop when the water is drained down in the bilge to a preset level.