Ultra Custom Pools

Item Tag: 3 Years

1000W Micro Grid Tie Inverter MPPT Function For Solar Wind System GTI1000W

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte.

LiTime 60A MPPT 12V/24V/36V/48V Auto DC Input Solar Charge Controller Bluetooth

【99% Tracking Technology】LiTime 60A MPPT Solar Charge Controller with advanced Maximum Power Point Tracking technology can continuously track array’s maximum power point so as to get the maximum amount of power to charge the battery. The tracking efficiency is not less than 99% and peak conversion efficiency is up to 97%.(Max. Solar Panel Input Voltage is 150V) 【Bluetooth Function】 LiTime 12V/24V/36V/48V MPPT Controller equipped with a built-in Bluetooth module, customers do not need to purchase another Bluetooth module, which can achieve remote control and display usage information. 【LCD Screen & LED Indicators】LiTime MPPT controller comes equipped with an LCD screen to display the system operation information and 4 buttons to operate in the menus. Plus, multiple LED indicators will help to indicate the state of the solar panel array, battery, loads, controller. 【Excellent Heat Dissipation & Multiple Protections】LiTime MPPT controller is made of die-cast aluminum, which ensures excellent heat dissipation to reduce the power loss. In addition, the multiple protections built in the solar charge controller can ensure that the controller is completely protected from Reverse Connection, Overpower, Overvoltage, Short-circuit, Over-temperature. 【Applicable to LiFePO4, Lead-acid Battery】LiTime 12V/24V/36V/48V 60A MPPT Solar Charge Controller with LiFePO4 Battery Charging Mode, making it easy operation to charge LiFePO4. But it’s also compatible for Sealed, Gel Lead-acid batteries by adjusting the parameter. 【Additional Components】The copper wire connector equipped in the accessory can increase the contact area between the wire and MPPT during installation, increasing the ability to transmit current. Q: Will an MPPT overcharge a battery?A: LiTime solar charge controllers use maximum power point tracking (MPPT) technology which optimize solar production and control the battery charging voltage to prevent overcharging. Q: What does an MPPT controller do when the battery is full?A: When the battery voltage reaches a point where the battery charger decides that the battery is full, the charger will cut out, and stop drawing power from the MPPT controller. In other words, the battery charger will present a high impedance to the MPPT controller. Q: Can I connect a MPPT directly to inverter?A: Chill dude, you’d better not do this. MPPT solar charge controllers help to flow the current efficiently into your depleted battery. If we connect an MPPT solar charge controller directly to the inverter, your soalr system can get damaged, but if not damaged, there will be zero input in the inverter. So connecting MPPTs directly to the inverter is a bad idea! Q: How many amps do I need for MPPT?A: You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the soalr charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A. On Aug 4, 2024 at 21:01:30 PDT, seller added the following information:

EF ECOFLOW 100W Flexible Solar Panel with High Efficiency Solar Modules, IP68

100W Flexible Solar PanelsOur lightweight, flexible solar panel is designed to perfectly fit the curvature of a van roof or RV. Mount and fast charge your Power Kits system or portable power station.This Panel Weighs only 5.1 lbs and Fits Multiple CurvesLight and Flexible, More Than EverOur flexible solar panel is exceptionally light and 70% lighter than traditional solar panels, making it convenient to move or mount. Easily flexes up to 258 degrees and is able to fit the unique shape of your RV or van without affecting solar input.Coated with Advanced Glass FiberDurable for Your Solar PowerEach of the 182 monocrystalline silicon cells is made using an advanced glass fiber and lamination process, protecting the panel and enhancing performance.Made from Highly Efficient Monocrystalline CellsCharge Faster with High Solar ConversionOur 100W flexible solar panel has an excellent efficiency rating of 23%, allowing you to charge even faster. The panel’s integrated bypass diodes prevent overheating while maintaining cell performance even in shaded environments. Combine as part of your Power Kits setup or EcoFlow portable power station, and the integrated MPPT algorithm optimizes your solar input.IP68* Waterproof RatingBuilt to Weather the StormOur 100W flexible solar panel can capture solar energy through even the heaviest rain. With a protective ETFE film, the panel’s solar cells can withstand many environments, from humid to dry.*Water and dust resistance were tested under controlled laboratory conditions with a rating of IP68 under IEC standard 60529 (maximum water depth of 1 meter for up to 72 hours.)Use the Pre-cut Eyelets to Fit Our Panels as You WishChoose Your Way to Install at EaseWith pre-cut eyelets, the flexible solar panel can be hung with hooks or can be securely attached to a surface using an adhesive.Solar Cable for Universal CompatibilityAdd Up to Your Solar and Power SystemsWith an all-inclusive solar connector, our 100W flexible solar panel can be even used with your existing 48v power system or portable power station. This panel includes a 3.3ft solar cable that gives you plenty of space to mount multiple panels, maximizing solar input.What’s in the box?1. 100W Flexible Solar Panel2. User Manual and Warranty Card*The solar to XT60 charing cable is included in EcoFlow portable solar panels.100W Flexible Panel SpecsSolar Panel WeightApprox.2.3 kg (5.1lbs)Dimensions1055*612*25 mm (41.5*24.1*1.0 in)Rated Power100 W（+/-5W）Open Circuit Voltage20.3 VShort Circuit Current6.3 AMaximum Operating Voltage17.1 VMaximum Operating Current5.9 ATemperature Coefficient of Rated Power-0.39%/°CTemperature Coefficient of Open Circuit Voltage-0.33%/°CTemperature Coefficient of Short Circuit Current0.06%/°CMaximum System Voltage600 VDC（UL）Maximum Fuse Current15 AWhat’s in the box?1. 100W Flexible Solar Panel2. User Manual and Warranty Card*The solar to XT60 charing cable is included in EcoFlow portable solar panels.100W Flexible Panel SpecsSolar Panel WeightApprox.2.3 kg (5.1lbs)Dimensions1055*612*25 mm (41.5*24.1*1.0 in)Rated Power100 W（+/-5W）Open Circuit Voltage20.3 VShort Circuit Current6.3 AMaximum Operating Voltage17.1 VMaximum Operating Current5.9 ATemperature Coefficient of Rated Power-0.39%/°CTemperature Coefficient of Open Circuit Voltage-0.33%/°CTemperature Coefficient of Short Circuit Current0.06%/°CMaximum System Voltage600 VDC（UL）Maximum Fuse Current15 A

3000VA Voltage Converter 50Hz-60Hz Transformer W/ 1.2m Power Cord, US Standard

Specifications Color: White Material: Iron and Silicon Steel Process: Spraying Shape: Rectangular Model: FY10-3000VA Mounting Type: Floor Standing or Hook-mounted Plug Type: US Standard Power Source: Corded Electric Input Voltage: AC100-110V Output Voltage: AC220-240V Rated Power: 3000VA Rated Frequency: 50Hz-60Hz Power Cord Length: 1.2m/3.94ft Product Size: 16*9.7*20cm/6.3*3.81*7.87 in Package Size: 28*20*14cm/11.02*7.87*5.51in Gross Weight: 7kg/15.43lbs Net Weight: 6.6kg/14.55lbs Package Included 1*Voltage Converter.

8000W Voltage Converter Transformer Step Up Down 110V to 220V,220V to110V Power

The 8000W Voltage Converter Transformer is a universal voltage converter with a product capacity of 10KVA, suitable for converting 110V to 220V and vice versa. It features a durable iron construction with a maximum input current of 6-10 A and a working temperature range of -5C to +40C. This converter has 4 outlets, surge energy capacity, and temperature rise protection. It is ideal for home and garden use, offering reliable power supply for various appliances with a maximum compatible appliance wattage greater than 3000W. The manufacturer warranty is 3 years, making it a dependable choice for electrical power conversion. It is a little damaged that’s why it is 100$ off retail never used tho