Ultra Custom Pools

Item Tag: 30-39 A

2000W Permanent Magnet Generator 3 Phase 48V Synchronous Gearless Dynamo Motor

Gearless, low start up torque and low RPM. Rated power: 2000W. Permanent magnet generator rotor using patented alternator, together with the special stator design, effectively reduce the generation of resistance torque, while allowing more wind turbines and generator has good matching characteristics, the unit runs reliability.

2000W Permanent Magnet Generator 3-Phase 120V220V Synchronous Gearless Generator

Model: L-2000 Rated power: 2000W Max power:2200W Rated speed：500rpm Rated voltage: 24V/48V/96V/120V/220V Start torque :0.62Nm Rated torque :19.1Nm Output current : AC Efficiency :>75% Service life: more than 20 Years Insulation class : F Bearing : HRB or for your order. Generator: 3 Phase Permanent synchronous Generator. Shaft material: Stainless steel Shell material: Aluminum alloy Permanent Magnet material: Rare Earth NdFeB Frequency:50Hz /60Hz Control system:electromagnetism Lubrication:add grease Working temperature:-40℃~80℃ Main motor weight:18kg Packing List： 1 PC Generator.

Power Queen 12V 24V 30A MPPT Smart Solar Charge Controller Regulator Bluetooth

【12/24V MPPT with 99% Tracking Efficiency】Given Innovation MPPT technology’s high tracking efficiency of up to 99% and peak conversion efficiency of 98%, the Power Queen MPPT Charge Controller can track arrays’ maximum power point to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15%-20% when compared to conventional PWM controllers.【Intuitive LCD Display & Remote Monitoring】The Power Queen MPPT Controller includes an LCD screen and multiple LED indicators, and it’s intended to display information about system operation, customizable parameters, and error codes. It includes a Bluetooth adaptor with an RJ12 port and can be used with the integrated RS232 communication protocol to remotely monitor the real-time status of the solar panel, battery, and loads. 【LiFePO4 Default Setting & Widely Use Range】The Power Queen 12/24V 30 Amp MPPT Charge Controller was conceived in response to the widespread demand from lithium battery users for a dedicated LiFePO4 battery controller. It’s intended for LiFePO4 batteries, with a 12V LiFePO4 default setting, but it’s also adaptable to Gel, Sealed, Flooded, and Lead-Acid batteries by manually setting.【Solid Case Design & Built-in Multiple Protections】The utilization of a die-cast aluminum heat sink increases heat dissipation efficiency, which reduces power loss due to heat. And it can operate at full load in temperatures ranging from -31°F to 113°F. Over-voltage, over-power, short-circuit, reverse-connection, reverse-charging, and over-temperature protection are all built-in, ensuring total protection from the solar panels to the load terminal. 【Complete Accessories Are Available in One Package】Power Queen MPPT Charge Controller provides the most comprehensive installing accessories for setting up a solar charge system. The accessories contain a copper wire connector* 6, heat shrink tubing* 6, mounting brackets * 4, and screws*8. The copper wire connector provides a larger contact area between the wire and the MPPT for increased overcurrent capability. Specification: Model : PQ2430 Rated Charging Current : 30ASystem Voltage: 12V(Default) / 24V / Auto Rated Load Current: 20ARated charging current:30ABattery Voltage: 9V to 32V Operating Temperature: -31°F to 113°F / -35°C to 45°CMax. Power Point Voltage Range : Battery Voltage +3V to 76V Conversion Efficiency: ≤97%Max. Solar Input Voltage : 100V(77°F / 25°C) / 90V(-13° F / -25°C) MPPT Tracking Efficiency : 99.9%Max. Solar Panel System Input Power: 450W for 12V / 900W for 24V Communication Method: RS485(RJ12)/Built-in BTTemperature Compensation Factor: -3mv/°F or °C / 2V (Default) Weight: 4.41lb / 2kgTemperature Sensor: Yes (Only for Lead-Acid battery) Dimensions：L245*W82.5*H180mm Package Included:Power Queen 30A MPPT Charge Controller*1 Remote Temperature Sensor (for Lead-Acid battery)*1 Mounting Brackets*4 Mounting Screws*12 Copper Wire Connector*6 Heat Shrink Tubing for cable*6 Installation Guide*1 User Manual*1 Expansion Tube*4 On Jun 3, 2024 at 22:23:07 PDT, seller added the following information:

Brand New Solaredge SE7600H-US000BNU4 240V 7600W HD-Wave Inverter

The Brand New Solaredge SE7600H-US000BNU4 240V 7600W HD-Wave Inverter is a high-quality charger and inverter designed for alternative energy supplies. With a maximum input power of greater than 2000W and a power source of solar, this inverter is perfect for grid-tie systems. Featuring power optimizer technology and a sleek white design, it offers features such as automatic voltage detection, daylight operation, and maintenance-free operation. Suitable for both indoor and outdoor environments, this inverter is a reliable choice for those looking to maximize their alternative energy supplies.