Ultra Custom Pools

Item Tag: 30-60 A

30A/60A MPPT Solar Panel Battery Charge Controller 12V/24V Regulator Dual USB DC

Product Description30A/60A MPPT Solar Panel Battery Charge Controller 12V/24V Regulator Dual USB US Specifications : Solar Charge Controller: 30A/60A Battery Voltage/System Voltage:12V/24V Auto Max PV Open Circuit Voltage:30V Self-consumption:≤10mA Loop Voltage Drop:≤0.3V Battery Typel:User, Flooded, AGM, GEL, LifePO4, Lithium USB Output:5V/2A×2 Operating Temperature:-4℉~+122℉ Protection Category:IP44 Humidity:95%, no-condensing Product size: 170*92*45MM Features : 【Solar Charge Controller】The solar charger controller compatibility with 12V 24V system. It helps you manage the working of solar panels and battery in solar systems automatically with the built-in industrial microcontroller. Dual USB output 5V/2A to support mobile phone charging. 【SAFE TO USE】Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection.Smart LCD display shows the charging status and battery status to make you more assured of charging,Besides regular input, output, and battery protection, protection of over-current from the solar panels are applied. 【LCD Display】Comes with a display that can clearly indicate the status and data, solar charger can be conveniently switched modes and parameter configurations. 【Battery Type】Adaptable to User, Flooded, AGM, GEL, LifePO4, Lithium, and other customized battery types. For protecting the lifespan of your battery, once the voltage of the battery is out of range, the solar controller will turn off automatically. 【Easy to Use】Charge controllers for solar panels should connect the battery first, then the solar panel, and finally the load.LCD display, adjustable parameter, suitable for home, industrial, commercial etc. Correct link, working instructions: Make sure the battery has sufficient voltage for the controller to recognize the battery before the first installation. 1.Connect the battery to the solar controller, the solar charge controller automatically recognizes the voltage. 2.Connect the solar panels to the charge regulator. 3.Connect the consumer to the solar charge controller. ShippingReturnsContact Us 1.Only ship to the confirmed address provided by ebay.Please make sure your address in ebay matches the address you would like us to ship to. 2.We offer refund if the item is broken before arrival, all you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. 3.The item shipping from USA. 4.We will shipping within 48H after you payment. If you have any issue about Item. Please contact us by ebay with 7 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.If you have any problems, we are very glad to help you. We will reply you within 48H receiving message.Shipping 1.Only ship to the confirmed address provided by ebay.Please make sure your address in ebay matches the address you would like us to ship to. 2.We offer refund if the item is broken before arrival, all you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. 3.The item shipping from USA. 4.We will shipping within 48H after you payment.Returns If you have any issue about Item. Please contact us by ebay with 7 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.Contact UsIf you have any problems, we are very glad to help you. We will reply you within 48H receiving message.

Solar Panel Regulator Charge Controller Auto Focus Tracking 30A 60A 12V/24V

Professional Tools & More Quality ProductGreat PricingSame Day*Fast Shipping Solar Panel Regulator Charge Controller Auto Focus Tracking 30A 60A 12V/24V Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 30A,60A System Voltage: 12V / 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 30A, 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) Solar Charge Controller User Manual  New eBay Managed Payments.  You may use any major credit cards, PayPal,  or Apple Pay to conveniently and securely pay for your orders.  Payment Free Same Day Shipping.You orders placed before noon (EST) will be processed and dispatched in the same day. We ship on Saturdays too.​​​​​​​Shipping eBay Managed, Hassle Free.If you are not 100% satisfied within 30 days of your purchase, you can return the product and get a full refund or replacement.​​​​​​​Returns Quality ProductGreat PricingFast ShippingSee our other itemsFeatures —Build-in industrial micro controller. —Large LCD display, all adjustable controlling parameter of the system. —Fully 3-stage PWM charge management. —Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. —Dual MOSFET Reverse current protection, low heat production LCD display/key and Operations: —MENU: Switch between different display, or to enter/exit setting by long press. —UP: Press to increase value. —DOWN: Press to decrease value. System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: —[24H] load output 24hours —[1-23H] load on after sunset and closed after setting hours —[0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications —Load: Light Control —Model: 30A,60A —System Voltage: 12V / 24V —Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) —Max input power: 390W(12V system); 780W(24V system) —Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) —Float charge: 13.7V(default, adjustable)，12.0-15.0V —Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V —Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V —Rated current: 30A, 60A —Self-consume:<10mA —Batteries: Only fit for OPEN, AGM, GEL —Operating Temperature:-35℃~60℃ —USB output: 5V/2A Max —Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A) Package Included —One (1) Solar Charge Controller —User Manual Solar Panel Regulator Charge Controller Auto Focus Tracking 30A 60A 12V/24V Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 30A,60A System Voltage: 12V / 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 30A, 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) Solar Charge Controller User Manual  Quality ProductFast ShippingSee our other items Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 30A,60A System Voltage: 12V / 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 30A, 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) Solar Charge Controller User Manual 

30A/60A MPPT Solar Panel Battery Charge Controller 12V/24V Regulator Dual USB US

Product Description30A/60A MPPT Solar Panel Battery Charge Controller 12V/24V Regulator Dual USB US Specifications : Solar Charge Controller: 30A/60A Battery Voltage/System Voltage:12V/24V Auto Max PV Open Circuit Voltage:30V Self-consumption:≤10mA Loop Voltage Drop:≤0.3V Battery Typel:User, Flooded, AGM, GEL, LifePO4, Lithium USB Output:5V/2A×2 Operating Temperature:-4℉~+122℉ Protection Category:IP44 Humidity:95%, no-condensing Product size: 170*92*45MM Features : 【Solar Charge Controller】The solar charger controller compatibility with 12V 24V system. It helps you manage the working of solar panels and battery in solar systems automatically with the built-in industrial microcontroller. Dual USB output 5V/2A to support mobile phone charging. 【SAFE TO USE】Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection.Smart LCD display shows the charging status and battery status to make you more assured of charging,Besides regular input, output, and battery protection, protection of over-current from the solar panels are applied. 【LCD Display】Comes with a display that can clearly indicate the status and data, solar charger can be conveniently switched modes and parameter configurations. 【Battery Type】Adaptable to User, Flooded, AGM, GEL, LifePO4, Lithium, and other customized battery types. For protecting the lifespan of your battery, once the voltage of the battery is out of range, the solar controller will turn off automatically. 【Easy to Use】Charge controllers for solar panels should connect the battery first, then the solar panel, and finally the load.LCD display, adjustable parameter, suitable for home, industrial, commercial etc. Correct link, working instructions: Make sure the battery has sufficient voltage for the controller to recognize the battery before the first installation. 1.Connect the battery to the solar controller, the solar charge controller automatically recognizes the voltage. 2.Connect the solar panels to the charge regulator. 3.Connect the consumer to the solar charge controller. ShippingReturnsContact Us 1.Only ship to the confirmed address provided by ebay.Please make sure your address in ebay matches the address you would like us to ship to. 2.We offer refund if the item is broken before arrival, all you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. 3.The item shipping from USA. 4.We will shipping within 48H after you payment. If you have any issue about Item. Please contact us by ebay with 7 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.If you have any problems, we are very glad to help you. We will reply you within 48H receiving message.Shipping 1.Only ship to the confirmed address provided by ebay.Please make sure your address in ebay matches the address you would like us to ship to. 2.We offer refund if the item is broken before arrival, all you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. 3.The item shipping from USA. 4.We will shipping within 48H after you payment.Returns If you have any issue about Item. Please contact us by ebay with 7 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.Contact UsIf you have any problems, we are very glad to help you. We will reply you within 48H receiving message. powered by