Ultra Custom Pools

Item Tag: 350

Garment Steamer Ironing Glove Heat Resistant for Clothes Grey

Insulation material:This mini hand-held ironing board is made of polyester on the outside and heat-resistant sponge on the inside to insulate the heat and protect your hands from steam burns. Features: The size of this steam ironing glove is about 25cm 15cm 3.5cm, especially the pointed point is more convenient for ironing shirt/suit sleeves and collar.

1/0 AWG 0 Gauge Copper Battery Cable, Car, Truck, RV, Solar – Custom Made 48″

1/0 Gauge AWG Copper Battery Cable, Car, Truck, RV, Solar – Custom Made Cable LENGTH: 48″ CENTER TO CENTER CHOOSE THE COLOR,LENGTH AND LUG CONFIGURATIONDUAL WALL 3:1 HEAT SHRINK USED ON THE ENDS.EACH CABLE IS HYDRAULIC CRIMPED AT EACH END. BUILT FROM CENTER TO CENTER OF THE LUG STUD HOLE. CABLE LUGS ARE TINNED COPPER LUGS USED FOR CORRISON RESISTENT AND MARINE USE. MADE IN THE U.S.A FEATURES –Oil ResistantResistant to Flame – UL VW-1 flame test outlined in UL1581600v105c tempepdm jacketabrasion resistant Resists cuts, tears, abrasion, grease, oil, water and flame.nom od- .533988 strands of 30 awg Bare copper.National Electrical Code article 630 electric weldersPower supply applications not exceeding 600 volts ACCopper meets SAE standardsMADE IN THE USA

Anderson SB175 Copper Battery Cable Assembly 1/0 Gauge AWG w lug/terminal/clamps

Battery Cable Anderson SB175 Assembly 1/0 Gauge AWG to lug, terminal, 600A clamp AUCTION IS ONLY FOR 1 CABLE. (NOT 2) YOU CHOOSE THE LENGTH OF THE WIRE WITH AN SB175 INSTALLED ON ONE END.PICK ONE OF THE 4 FOLLOWING OPTIONS FOR THE OTHER END: OPTIONS:NO CONNECTORS ON THE OTHER SIDE (BLUNT END) CORROSION RESISTANT TIN PLATED PURE COPPER LUGS(5/16 OR 3/8 STUD HOLE) PURE COPPER TOP POST TERMINALS CORROSION RESISTANT TIN PLATED(POS & NEG) 600 AMP EXTRA HEAVY DUTY JUMPER CABLE PARROT CLAMPSThe SB175 GREY plug will ONLY mate with other GREY SB175 plugs.SB175 RED and GRAY plug WILL NOT MATE TOGETHER as they are KEYED differently . The SB175 will not mate with a SB350 plug or SB50 smaller plug. The SB175 plug of the same color will mate even with different wire sizes as the actual contacts are the same( example- 4 awg Anderson Contacts will mate with 1/0 contacts as long as the Housings are the same. Grey to Grey, Red to Red. NOT GREY TO RED. NOT SB175 TO SB350SB175 TO SB175 ONLY. THE WIRE WE USE TO BUILD WITH IS 100 % COPPER NOT THE CHEAP (CCA WIRE)-COPPER CLAD ALUMINUM) 1/0 GAUGE SAE WELDING CABLE• Resists abrasion, cut, tear, flame, grease, oil and water• National Electrical Code article 630 electric welders• Rated for 600V• RoHS CompliantEDPM jacket and paper separatorHighly flexible Class K 30 gauge copper• VW-1 Flame test as per UL2556 Suitable for battery cable per the UL558 & UL583-50°C to +105°C (-58°F to 221°F) • Made in the USA THE ANDERSON CONNECTORS ARE 100% AUTHENTIC NOT THE KNOCK OFF CHINA ONES. THE CABLE LUGS ARE ELECTRODE PLATED MADE OF T2 RED COPPER600V APPLICATIONS : Automotive Battery CablesMarine Battery CablesSolar Battery Banks Forklift Charge CablesPower RV Inverter CablesWelding Cable LeadsAmplifier CAR Audio Wiring THESE CABLES ARE TOUGH &MADE IN THE U.S.A

1/0 AWG 0 Gauge Copper Battery Cable, Car, Truck, RV, Solar – Custom Made 24″

1/0 Gauge AWG Copper Battery Cable, Car, Truck, RV, Solar – Custom Made Cable LENGTH: 24″ CENTER TO CENTER CHOOSE THE COLOR,LENGTH AND LUG CONFIGURATIONDUAL WALL 3:1 HEAT SHRINK USED ON THE ENDS.EACH CABLE IS HYDRAULIC CRIMPED AT EACH END. BUILT FROM CENTER TO CENTER OF THE LUG STUD HOLE. CABLE LUGS ARE TINNED COPPER LUGS USED FOR CORRISON RESISTENT AND MARINE USE. MADE IN THE U.S.A FEATURES –Oil ResistantResistant to Flame – UL VW-1 flame test outlined in UL1581600v105c tempepdm jacketabrasion resistant Resists cuts, tears, abrasion, grease, oil, water and flame.nom od- .533988 strands of 30 awg Bare copper.National Electrical Code article 630 electric weldersPower supply applications not exceeding 600 volts ACCopper meets SAE standardsMADE IN THE USA

Positive Battery Cable 1/0 AWG 0 Gauge Copper Custom Made Auto,Truck, SAE

Battery Cable POSITIVE 1/0 Gauge AWG Copper Custom – Car, Truck, RV, Boat, Solar & Car Audio QTY: 1 BUILT WITH A TOP POST CONNECTOR TO WHICH EVER LUG YOU NEED ON THE OTHER END.DUAL WALL 3:1 HEAT SHRINK USED ON THE ENDS TO SEAL THE TERMINAL CRIMP JOINT.EACH CABLE IS HYDRAULIC CRIMPED AT EACH END.CABLE LUGS ARE TINNED COPPER LUGS USED. MADE IN THE U.S.A FEATURES –Oil Resistant600v105c tempepdm jacketabrasion resistantnom od- .526975 strands of 30 awg Bare copper.Power supply applications not exceeding 600 volts ACCopper meets SAE standardsSAE J1127MADE IN THE USASAE J1127 Standard • Requires a minimum amount of copper. • Higher tensile strength. • Passes the SAE flame test. • Passes exposure to oils and fluids including: Gasoline, Oil, Engine Coolant, Acid, Power Steering Fluid, Diesal, Transmission Fluid, and Ethanol.