Blue Ridge 300L Wood Burning Stove-Large 75,000 BTUs EPA 30% Tax Rebate

Get a 30% USA tax credit on this stove purchase and the entire install! Please contact me with any questions. Ideal for spaces up to 2,100 ft², this large non-catalytic wood stove produces up to 75,000 BTU/h and emits only 2.3 g/h of fine particles. The unit is equipped with a top heat exchanger that redirects heat to the front of the unit. Included: legs, ash drawer & lip, air intake damper & rear air deflector ▪ High efficiency 2.4 ft³ firebox▪ Up to 8 hours burn time▪ Steel top reinforced with a stainless steel heat shield▪ High density refractory bricks▪ Cast iron door and ceramic glass▪ EPA certified▪ Proudly made in USA▪ Non-catalytic combustion system▪ Certified for mobile home and alcove installation▪ Qualifies for the 30% US tax credit For 25′ Chimney liner kit see: https://www.ebay.com/itm/335578746928 for 35′ liner kit see: https://www.ebay.com/itm/335491162508 Exterior Dimensions: 25-1/2″ W x 28″ H x 23-1/4″ DFeatures:Outstanding 77% efficiency ratingCan generate up to 110,000 BTUs and heat 1,000 to 2,700 sq. ft.Conveniently-located air control leverDurable firebox with full refractory liningBlack Cast iron doorStainless steel burn tubesAttractive black finishEPA 2020 ApprovedSpecifications:Dimensions: 25-1/2″ W x 28″ H x 30-1/2″ DFirebox Capacity: 2.4 cu. ft.Burn Time: 8 hoursMaximum Log Size: 20″Emissions: 2.3 grams per hourFlue Diameter: 6″Included:stovelegsash drawer & lip, air intake damper & rear air deflectorInstall instructions and owners manual Weight: 520 lbWarranty: 5 yr limited, 1 yr on electrical*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches.PLEASE inspect all packages/shipments for damage. If it arrives damaged, have the delivery driver note damage on the receipt. If it is severely damaged, REJECT the shipment.If you accept the shipment visibly damaged, we may noy be able to file a claim against the delivery company, unless the damage is noted. Take pictures of the damage.If outside damage is not visible, but is discovered after opening, WE HAVE 5 DAYS AFTER DELIVERY TO FILE A CLAIM. Again, take pictures and notify us ASAP.

3M Silane Glass Treatment AP115, Clear, 4 oz Bottle

3M Silane Glass Treatment AP115, Clear, 4 oz Bottle Manufacturer:3M Part Number:7000001327 3M Silane Glass Treatment AP115 is an IPA based silane glass treatment that is used in conjunction with 3M VHB Tape to promote adhesion. It is easy to apply using the 4 fl. oz. spray bottle and is also available in a 1 gallon bulk bottle. It is clear in color.Promote Adhesion to Uncoated Glass Surfaces Our 3M™ Silane Glass Treatment AP115 is a solvent mixture of isopropyl alcohol and water that is used to increase adhesion of 3M™ VHB™ Tapes to uncoated glass surfaces. Glass surfaces are water loving in nature, which can cause issues in humid or wet environments when attempting to create a strong, long-lasting adhesive bond. Moisture can undercut the tape bondline and interfere with normal adhesion forces. 3M™ Silane Glass Treatment AP115 creates a hydrophobic surface that protects the 3M™ VHB™ Tape and bonds in even the most moist environments. Easy to apply and clear in color Recommended Applications Glass treatment in wet or humid enviroments Construction industry Application Instructions Moisten a clean, soft absorbent, lint-free cloth with the silane solution (or spray solution onto surface) and wipe the area to be bonded in one direction. Immediately follow with a dry lint-free cloth (two-cloth method). A thin “mono-layer” of the silane solution gives the best results. The glass should be completely dry with no film residue visible.* Under normal room temperature conditions it is best to wait 1 to 2 minutes before applying the tape so that any residual moisture can evaporate. Apply 3M™ VHB™ Tape within 15 minutes after treating the surface to minimize the risk of recontamination of the surface.Promotes adhesion of 3M™ VHB™ Tapes to uncoated glass surfacesCreates a hydrophobic surface on uncoated glass to protect the 3M™ VHB™ Tape bondlineAvailable in 4 fl. oz spray bottle or 1 gallon bulk bottleDurable and easy to applyClear in color Please allow 2 days for production. Sold as each General Information Brand3M™Country Of OriginUnited StatesSold AseachLead Time2 daysDimensions and Specifications Application Temperature-Environment50F-100FApplication Temperature-Environment (Metric)10°C – 38°CNet Weight (Imperial)0.26 lbNet Weight (Metric)0.12 kgOverall Height (Imperial)5.88 inOverall Height (Metric)14.92 cmOverall Length (Imperial)1.64 inOverall Length (Metric)4.17 cmOverall Width (Imperial)1.64 inOverall Width (Metric)4.17 cmStorage Temperature50°F – 95°FStorage Temperature (Celsius)10°C – 35°CVolume (Imperial)4 fl ozVolume (Metric)118.29 mLOverall Length Imperial1.64Volume Imperial4.0Volume Metric118.29Volume19.66 cubic inch 322.19 cm3Weight4.48 oz 127 gOther Details Clean-upIsopropyl AlcoholFull Cure Time2 minIndustriesConstructionPhysical FormLiquidShelf Life In Months (From Date Of Manufacture)12 Units Per Case20.0Consumer LabelNoMaterial and Composition Product FormEachShelf Life365Color and Appearance Product ColorTransparent About the Manufacturer At 3M, we apply science in collaborative ways to improve lives daily. 3M is a global science company that never stops inventing. Using 46 technology platforms, our integrated team of scientists and researchers works with customers to create breakthroughs. Our inventions have improved daily life for hundreds of millions of people all over the world. With $30 billion in sales, our 90,000 employees connect with customers all around the world. Scientists, researchers and marketers work across countries and across subjects to solve challenges big and small. Bulk Pricing For customers who wish to order large quantities of this item and would like to receive bulk pricing, please contact us directly and we will provide the best price possible.