Ultra Custom Pools

Item Tag: 4 Tons

4 Ton 13.4 SEER2 Goodman Single Packaged HEAT PUMP Multi-Position Single-Phase

Installation Warning: This appliance must be installed by a qualified technician. Incorrectly connecting lines or improperly configuring flues or vents can lead to fatal consequences. By purchasing this item, you are confirming your commitment to employ a trained technician for the installation of this appliance. We disclaim any responsibility for injuries or property damage resulting from improper servicing or service procedures. The individual responsible for installing or servicing this unit assumes full liability for any personal injury or property damage that may occur. Please note that in many jurisdictions, a license is required for the installation of this equipment. Compliance with local regulations and safety standards is imperative. Product Summary Boasting hushed horizontal or downflow discharge alternatives and a pre-charged refrigerant system for effortless installation, the Goodman GPHM34841 heat pump packaged unit serves as a budget-friendly choice for all-in-one heating and cooling needs. With a modest efficiency rating and long-lasting reliability, the GPHM34841 exemplifies the Goodman brand’s commitment to delivering both exceptional comfort and affordability.Featuring 4-Ton Capacity: The Goodman GPHM34841 heat pump packaged unit is well-suited for cooling smaller homes in various climates. It’s important to note that this unit’s heating capability is limited to temperatures above 30°F. For heating below this threshold, an additional backup heating kit is required, available as a field-installable accessory at an extra cost.Efficient 14 SEER Rating: The Goodman GPHM34841 heat pump boasts a 13.2 SEER2 (Seasonal Energy Efficiency Ratio) rating, representing the standard efficiency level currently available in the market. This rating qualifies it for installation in all mainland US states. If you desire a higher efficiency unit, consider that a 15.2 SEER system would provide approximately 12% greater efficiency compared to this one.Generous Warranty Coverage: Goodman provides a 10-year parts warranty for the GPHM34841, subject to the condition that the installation adheres to state and local codes at the installation address and the unit is registered online through the manufacturer. This warranty ensures peace of mind for an extended period.Built for Durability and Reliability: The GPHM34841 is meticulously designed for durability, featuring a sturdy cabinet constructed from heavy-gauge galvanized-steel and enhanced coil protection. The fan motor is fully enclosed and permanently lubricated, ensuring a long-lasting unit and eliminating the need for additional lubrication, thereby reducing maintenance costs.Hassle-Free Installation and Maintenance: All Goodman packaged units arrive fully charged and factory-tested, significantly reducing installation expenses as there is no need for additional refrigerant. The GPHM34841 is versatile in its application, suitable for various packaged unit scenarios, whether on your roof or beside your house, especially when an indoor furnace or air handler is not feasible. Furthermore, the fully-insulated blower compartment includes convenient access panels, simplifying maintenance procedures.Prioritizing Comfort: Goodman remains steadfast in its commitment to providing top-tier comfort, all while maintaining affordability and ensuring quiet, efficient, and dependable unit operation. The GPHM34841 consistently upholds Goodman’s high standards for comfort delivery.Additional Features:Utilizes a high-efficiency compressor for optimal performanceEquipped with an EEM (Electronically Efficient Motor) blower motorOffers convertible airflow, allowing for horizontal or downflow installation optionsFeatures copper tube and aluminum fin coils for efficient heat exchangeIncludes a liquid-line filter drier for enhanced system reliabilityThe air-handling compartment is fully insulated for improved efficiencyIncorporates louvered condenser coil protection for added durabilityOptional HKR heat kits are available for separate purchaseDesigned for 208/230V power supplyShipping Policy We use trusted freight carriers for safe and timely deliveries. For the most accurate tracking of your freight shipments, we recommend visiting the carrier’s official website. Once your order is shipped, you’ll receive details about the freight company responsible for your delivery and the tracking information to monitor your order’s progress. Delivery times vary based on factors like shipping method, distance, and carrier schedules. We’ll provide an estimated delivery window when you order. While we aim to meet these times, unexpected issues can sometimes cause delays. Contact us for updates. Return & Refund Policy We are dedicated to providing exceptional service and support. If you need to return an unused product purchased through our eBay store, we’ve made the process straightforward and transparent to ensure your peace of mind.Purchase Source: Returns and refunds are available exclusively for items purchased directly from our eBay store.Restocking Fee: A 15% restocking fee may be applicable to returned items, unless the product is defective. Return Window: Initiate a return by contacting our customer service within 30 days from the shipment date.Requirements for a RefundTo ensure a smooth return process and eligibility for a refund, please adhere to the following guidelines: Resalable Condition: All returned items must be in a condition suitable for resale.No Damages: Products must be free from any damages, scratches, or defects.Uninstalled: Items must not have been installed or used.Original Packaging: Return the item in its original manufacturer packaging, including all manuals, accessories, and packaging materials.Free/Gift Items: Any free or gift items that were included with the purchase must also be returned.Packaging Integrity: Ensure there are no writings or labels on the original manufacturer packaging.Shipping Instructions for ReturnsTraceable Shipping: Return packages must be sent via a traceable shipping method such as FedEx or UPS. Please avoid using USPS. Freight Equipment: Freight-bound equipment must be returned via freight carriers. If you are unsure about the return method for your products, please contact us through the eBay mail system.RMA Number: All items must be returned with their assigned Return Merchandise Authorization (RMA) number if applicable.Our goal is to provide you with a seamless return experience. For any questions or assistance, our customer service team is here to help. Thank you for choosing us!

Quint Zone Ductless Mini Split Air Conditioner Heat 9000 x 3 + 12000 + 18000 BTU

Thermocore 57000 BTU AC-Heat 21 SEER 57000 BTU Quint Zone Energy Star Mini Split AC 21 SEER Efficiency w/ Heat Pump Technology With a 57000 BTU total Cool / Heat Capacity, the Thermocore T423Q-H260-9+9+9+12+18 Energy Star mini split AC can cool or heat 5 separate zones of 9000-9000-9000-12000-18000 BTU for a total coverage area of 2700 ft² (400 + 400 + 400 + 600 + 900 ft²). Most Energy Efficient Quint-Zone series on the market! – 21 SEER coupled with Inverter technology provides the benefits of HYPER HEAT low operation temps down to -13F as well as maximum energy efficiency. 5 x 15ft Install kits included. 1 Year Part – 5 year compressor warranty. Technical Data: System Includes: 57000 BTU INVERTER Cooling Capacity (9+9+9+12+18) 57000 BTU INVERTER Heating Capacity (9+9+9+12+18) 21 SEER – 10.80 HSPF – AHRI / ENERGY STAR Certified* Pre-Charged with ECO-Friendly R410A 1 Year Parts – 5 Year Compressor Warranty View Details > Indoor Unit – Air Handler. Outdoor Unit – Condenser of 44000-58000 BTUs Digital Multi-function LCD Remote Control. Installation Kit with 15′ x 5 of lineset. >>> Product and Installation Manual. >>> ** Rated Capacity of Condenser will be less than actual delivered capacity in above configuration. Rated Capacity is not the same as Maximum Capacity. Click here for Capacity Calculation Table. ** Top Line Features: 21 SEER – 10.80 HSPF – ENERGY STAR Most Efficient Quint-Zone Series on Market Dry-Mode removes moisture w/o affecting temp Cross Flow Technology reduces noise output Compatible with over 5 Filtration medias Freon Leak Detection > Notification system Low Ambient Temperature Operation (-13° F) Two-direction Air vane Evenly Distributes Air Restart IC: Settings restored Following Outage Follow-Me Function tracks Remote Location The particle filter or “pre-filter” removes dust and other air-borne pathogens before pushing the air through additional filtration medias and the refrigeration coil array. This filter is washable and comes factory installed with every ductless air conditioner system. The open channel construction of the 3M High Air Flow (HAF) filter offers low initial airflow resistance, while its unique microstructure and electrostatic charge provides effective particle capture and retention. This translates into fewer filter change outs and reduced coil cleaning. CLICK TO PURCHASE >>> The Vitamin C Filtration media releases Vitamin C into the air which softens skin and reduces stress among other therapeutic benefits. A good choice for those wanting to add some invigoration to their indoor air environment. Filter lasts over 2 years. CLICK TO PURCHASE >>> The anti-microbial effect of silver ionic technology kills allergy causing bacteria by destroying the inner configuration elements of the cell body. The nano-silver attached to the filter screen constantly releases silver ions which directly eliminates and prohibits bacteria from replicating. CLICK TO PURCHASE >>> Eliminates odors such as ammonia and deactivates harmful chemicals has such as formaldehyde. By forming positive positions on the filter surface, Electrostatic Fiber traps small dust particles, smoke and pet dander to prevent allergic reactions and neutralize odor in the air. CLICK TO PURCHASE >>> 9000 BTU Indoor Unit specs Model Number T3-OS209-EW Capacity 9000 BTU Air Flow (Hi/M/Lo) 440/380/260 cfm Power Supply 230 V / 60 Hz / 1Ph Noise Output (Hi/M/Lo) 43/37/31 dBA Liquid / Gas 1/4″ x 3/8″ Weight 18.1 lbs Dimensions (W x D x H) 31.6″ × 7.5″ × 11.7″ in. 12000 BTU Indoor Unit specs Model Number T3-OS212-EW Capacity 12000 BTU Air Flow (Hi/M/Lo) 440/380/260 cfm Power Supply 230 V / 60 Hz / 1Ph Noise Output (Hi/M/Lo) 36/27/23 dBA Liquid / Gas 1/4″ x 1/2″ Weight 18.1 lbs Dimensions (W x D x H) 31.6″ × 7.5″ × 11.7″ in. 18000 BTU Indoor Unit specs Model Number T321S-H218-E Capacity 18000 BTU Air Flow (Hi/M/Lo) 710/560/440 cfm Power Supply 230 V / 60 Hz / 1Ph Noise Output (Hi/M/Lo) 47/40/31 dBA Liquid / Gas 1/4″ x 1/2″ Weight 35.5 lbs Dimensions (W x D x H) 42.5″ × 8.9″ × 13.2″ inches Outdoor Unit (condenser) specs CLICK FOR FULL SPEC SHEET Model Number T423Q-H260-C Compressor Brand TOSHIBA – GMCC Rated Capacity 48000 BTU Maximum AH Capacity 63000 BTU Air Flow 4470 CFM Power Supply 230 V / 60 Hz / 1Ph Input Power 1900W – 6440W SEER 21.5 (IF USED WITH T3 MOUNT) EER 10.50 HSPF4 10.80 Sound Level 64 dBA Moisture Removal 3.9 L/hr Operating Temp Range -13 – 122 F (cool and heat) Refrigerant R410A / 162 oz Charge Liquid / Gas 1/4″ x 3/8″ (3) – 1/4″ x 1/2″ (2) Max Lineset Length (1 zone) 98 ft Max Lineset Length (all zones) 246 ft Weight 224 lbs Dimensions (W x D x H) 37.5 × 16.5 × 52.5 inches Install Kit Contents: 15 Feet Flared Copper Tubing x 5 15 Feet Pipe Insulation x 5 Drain Pipe (outdoor) Outdoor Condenser Rubber pads Wall Bracket for Indoor Unit x 5 Brass Adaptors for Alternate lineset sizes Installation and User Manuals ** Extend 15 foot copper lineset to 25-30-40-50-65 feet. Just $4.50 / additional foot** Does not Include 16/4 Electrical Wire Harness – Click here to purchase WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split* Click for Installation Tip. It is highly advised a certified HVAC technician complete installation to be eligible for warranty. See warranty details below > *5 Year Compressor – 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service – troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out. 1 YEAR PARTS WARRANTY CAN BE EXTENDED TO 2 YEARS FOR AN ADDITIONAL $72.00 SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Oak Park, Michigan and are palletized onto a single skid. Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only). SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. System comes with Free shipping – this includes delivery to any location within the Continental United States. We will ship to Canadian locations but we need to quote separately – please contact our offices. Additional freight for Canadian registries is usually around $150. (import and duties may apply). Condenser Ground Stand – Provides Flat even surface – Avoids debris obstruction Price: $73.00 Click for more Info Lineset Extension (1/4 x 3/8) – Extend included 16 ft copper lineset to 25ft – 30ft – 40ft – 50ft Price: $38.00 > $134.00 Click for more Info Condenser Bracket – Mount your condenser at any height on an outdoor sidewall Price: $78.00 Click for more Info Micro-Pump II – Required when mounting air handler on Interior wall Price: $182.00 Click for more Info Electrical Wire Harness – 16/4 Electrical Wire Harness – For Extending Evap. Length Price: $1.85 / ft Click for more Info Additional Remote Controls – Spare remote controls for the T1 Series Ductless System Price: $42.00 Click for more Info Filter Medias – Inserts into Filter Screen Slot – Choice of 4 Filtration Medias Price: $10.00 – $14.00 Click for more Info Wired Thermostat – Permanently Hard Mounts – Controls Settings w/ Remote Price: $78.00 Click for more Info Swap 1 Mount for Cassette: (+) $150 Swap 2 Mount for Cassette: (+) $300 Swap 3 Mount for Cassette: (+) $450 Swap 4 Mount for Cassette: (+) $600 Swap 5 Mount for Cassette: (+) $750 * 9k heads do not come in cassette option – need to upgrade to 12k Swap 1 Mount for Susp. Ceiling: (+) $160 Swap 2 Mount for Susp. Ceiling: (+) $320 Swap 3 Mount for Susp. Ceiling: (+) $480 Swap 4 Mount for Susp. Ceiling: (+) $640 Swap 5 Mount for Susp. Ceiling: (+) $800 *If alternate air handler types are preferred, contact us and request invoice with preferred options. Availability fluctuates. Customize your system to meet your requirements – see below table for available output options: Tri-Zone Setup 9k + 18k + 18k 9k + 18k + 24k 12k + 12k + 18k 12k + 18k + 18k 9k + 9k + 24k 12k + 12k + 24k 12k + 18k + 24k 12k + 24k + 24k 18k + 18k + 18k 18k + 18k + 24k Quad-Zone Setup 9k + 9k + 12k + 12k 12k + 12k + 12k + 12k 9k + 12k + 12k + 18k 12k + 12k + 12k + 12k 12k + 12k + 12k + 18k 9k + 9k + 9k + 24k 9k + 12k + 18k + 18k 9k + 9k + 18k + 18k 9k + 18k + 18k + 18k 9k + 9k + 18k + 24k 12k + 12k + 18k + 18k 12k + 12k + 12k + 24k Quint-Zone Setup 9k + 9k + 9k + 9k + [9/12/18/24] 9k + 9k + 9k + 12k + [12/18] 9k + 9k + 9k + 18k + 18k 9k + 9k + 12k + 12k + [12/18] 9k + 12k + 12k + 12k + 12k 12k + 12k + 12k + 12k + 12k This system available in multiple air handler (zone) capacity combinations to meet the requirements of any application. Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (54000 BTU’s) – the total output will not exceed 54000’s when all air handlers are running at full capacity simultaneously. However, overated zones will draw required capacity from other zones either running at lower modes or areas that have reached thermostat settings to obtain rated output. For example, with a 12k-12k-12k-12k+12k configuration, the total output will be along the lines of 11k-11k-11k-11k+11k when all zones are running on high/full settings at the same time. However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-12k yield. See Combination Calculation Table View the Mini Split FAQ > View the Mini Split Outline Diagram > Click to contact us >

48000 BTU Quad Zone Ductless Mini Split Air Conditioner Heat: 9k+12k+12k+18k

4 Ton Quad Zone Mini Ductless Split Air Conditioner 51000 BTU 48,000 BTU Ductless Mini Split AC 21 SEER Efficiency w/ Heat Pump Technology With a 48000 BTU total Cooling-Heating Capacity, this Inverter DC mini split system can cool or heat 4 seperate 9000-12000-12000-18000 BTU zones [400 + 400 + 600 + 900 ft²] for a total coverage area of 2500 ft². A 21 SEER rating coupled with Inverter technology provides the benefits of low operation temps, rapid cooling as well as maximum energy efficiency. Includes LCD remote-warranty package. Linesets and wire sold seperately. SystemFeaturesSpecificationsInstallation KitSetup – InstallationWarrantyShipping Technical Data: System Includes: 51000 BTU Cooling Capacity: (9k + 12k + 12k + 18k) 51000 BTU Heat Pump Capacity: (9k + 12k + 12k + 18k) INVERTER DC TECHNOLOGY: 21 SEER Quad-Zone Setup (4 Air Handlers) 1 Year Parts – 5 Year Compressor Warranty View Details > Indoor Units – Air Handler [x 4] Outdoor Compressor w/ Total Rating of 48,000 BTU’s Digital, Multi-function LCD Remote Control [x 4] Filtration Screens – Multi Folds Evaporator *When all four air handlers are running simultaneously at full capacity, the total combined BTU output is limited to that of the outdoor condenser. Top Line Features: Quad Air Handlers for Multi-Zone Placement INVERTER DC TECHNOLOGY: 21 SEER Intelligent Mechanical Defrosting Washable Filters – Biologically Actv Enzyme Low Startup Temps – MAXIMUM EFFICIENCY Pre-charged with freon for 100ft of piping Sleep Mode – 24 hour ON/OFF Timer – Memories Enhanced Copper Coil – Wide Angle Air Spread 2500 ft² coverage area: 400 + 600 + 600 + 900** Installation Lineset Sold Seperately: Available in 15-75ft Lengths. Contact us for customized package or Click here to Purchase. 9000 BTU Indoor Air Handler Specs: CLICK TO ENLARGE 12000 BTU Indoor Air Handler Specs: CLICK TO ENLARGE 18000 BTU Indoor Air Handler Specs: CLICK TO ENLARGE Outdoor Compressor Unit Specs: CLICK TO ENLARGE WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split* See Installation Tip. A certified HVAC technician must conduct / complete the installation to be eligible for the warranty. (See warranty details below > ) *5 Year Compressor – 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service – troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Manual – Warranty Polices > These Mini Split units usually ship via SAIA Motor Freight (on truck) or some other freight service. These units ship out of Missouri and are in transit with 2 business days from payment receipt. Depending on where you are geographically located, transit time is usually between 3 and 6 business days. Please provide a contact phone# upon checkout where recipient of order can be reached. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Condenser Ground Stand – Provides Flat even surface – Avoids debris obstruction Price: $83.00 Click for more Info Lineset (1/4 x 3/8) – Required for Installation 15ft > 75ft Length Options Price: $64.00 > $224.00 Click for more Info Condenser Bracket – Mount your condenser at any height on an outdoor sidewall Price: $96.00 Click for more Info Micro-Pump II – Required when mounting air handler on Interior wall Price: $182.00 Click for more Info Electrical Wire Harness – 16/4 Electrical Wire Harness – For Extending Evap. Length Price: $1.75 / ft Click for more Info Additional Remote Controls – Spare remote controls for the T1 Series Ductless System Price: $49.00 Click for more Info Lineset Covers – Available in different sizes – Concels and protects linesets Price: $10.00 – $14.00 Click for more Info Programmable Thermostat – Permanently Hard Mounts – Programs 7 days a week Price: $112.00 Click for more Info Swap 1 – 9k Wall Mount for Ceiling Cassette: (+) $130 *Swap 1 – 12k Wall Mount for Ceiling Cassette: (+) $100Swap 1 – 18k Wall Mount for Ceiling Cassettes: (+) $125Swap all 4 Wall Mounts for Ceiling Cassettes: (+) $445 * No 9000 BTU cassettes – need to exchange for 12000 BTU Swap 1 – 9k Wall Mount for Susp. Ceiling Mount: (+) $190Swap 1 – 12k Wall Mount for Susp. Ceiling Mount: (+) $232Swap 1 – 18k Wall Mount for Susp. Ceiling Mount: (+) $248Swap all Wall Mounts for Susp. Ceiling Mounts: (+) $902 *If alternate air handler types are preferred, request invoice with preferred options upon checkout or contact us. View the Mini Split FAQ >View the Mini Split Outline Diagram >Click to contact us > View the Mini Split FAQ >View the Mini Split Outline Diagram >Click to contact us >

48000 BTU Quint Zone Ductless Mini Split Air Conditioner Heat: 9000 x 4 + 12000

Thermocore 45000 BTU AC-Heat 21 SEER 45000 BTU Quint Zone Energy Star Mini Split AC 21 SEER Efficiency w/ Heat Pump Technology With a 27000 BTU total Cool / Heat Capacity, the Thermocore T423Q-H260-9+9+9+9+9 Energy Star mini split air conditioner can cool or heat 5 separate zones of 9000 BTU for a total coverage area of 2000 ft² (400 ft² x 5). Most Energy Efficient Quint-Zone series in the market! – A 21 SEER coupled with Inverter technology provides the benefits of low operation temps as well as maximum energy efficiency. 5 x 15ft Install kits included. Features Specifications Installation Kit Inverter Technology Setup – Installation Warranty Shipping Available Accessories Technical Data: System Includes: 45,000 BTU INVERTER Cooling Capacity 45,000 BTU INVERTER Heat Pump Capacity 21 SEER – 10.80 HSPF – AHRI / ENERGY STAR Certified* Pre-Charged with ECO-Friendly R410A 1 Year Parts – 5 Year Compressor Warranty View Details > Indoor Unit – Air Handler. Outdoor Unit – Condenser of 44000-58000 BTUs Digital Multi-function LCD Remote Control. Installation Kit with 15′ x 5 of lineset. >>> Product and Installation Manual. >>> Top Line Features: 21 SEER – 10.80 HSPF – ENERGY STAR Most Energy Efficient Tri-Zone Series on Market Dry-Mode removes moisture w/o affecting temp Cross Flow Technology reduces noise output Compatible with over 5 Filtration medias Freon Leak Detection > Notification system Low Ambient Temperature Operation (5° F) Two-direction Air vane Evenly Distributes Air Restart IC: Settings restored Following Outage Follow-Me Function tracks Remote Location The particle filter or “pre-filter” removes dust and other air-borne pathogens before pushing the air through additional filtration medias and the refrigeration coil array. This filter is washable and comes factory installed with every ductless air conditioner system. The open channel construction of the 3M High Air Flow (HAF) filter offers low initial airflow resistance, while its unique microstructure and electrostatic charge provides effective particle capture and retention. This translates into fewer filter change outs and reduced coil cleaning. CLICK TO PURCHASE >>> The Vitamin C Filtration media releases Vitamin C into the air which softens skin and reduces stress among other therapeutic benefits. A good choice for those wanting to add some invigoration to their indoor air environment. Filter lasts over 2 years. CLICK TO PURCHASE >>> The anti-microbial effect of silver ionic technology kills allergy causing bacteria by destroying the inner configuration elements of the cell body. The nano-silver attached to the filter screen constantly releases silver ions which directly eliminates and prohibits bacteria from replicating. CLICK TO PURCHASE >>> Eliminates odors such as ammonia and deactivates harmful chemicals has such as formaldehyde. By forming positive positions on the filter surface, Electrostatic Fiber traps small dust particles, smoke and pet dander to prevent allergic reactions and neutralize odor in the air. CLICK TO PURCHASE >>> Indoor Unit (evaporator) specs CLICK FOR FULL SPEC SHEET Model Number T3-OS209-EW Capacity 9000 BTU Air Flow (Hi/M/Lo) 450/348/240 cfm Power Supply 230 V / 60 Hz / 1Ph Noise Output (Hi/M/Lo) 36.5/30/25 dBA Liquid / Gas 1/4″ x 3/8″ Weight 18.1 lbs Dimensions (W x D x H) 31.6″ × 7.45″ × 11.7″ in. VIEW FULL AIR HANDLER SPECIFICATION SHEET >>> Outdoor Unit (condenser) specs CLICK FOR FULL SPEC SHEET Model Number T423Q-H260-C Compressor Brand TOSHIBA- GMCC Rated Capacity 48000 BTU Maximum AH Capacity 63000 BTU Air Flow 4470 CFM Power Supply 230 V / 60 Hz / 1Ph Input Power 1900W – 6440W SEER 21.5 (IF USED WITH T3 MOUNT) EER 10.50 HSPF4 10.80 Sound Level 64 dBA Moisture Removal 3.9 L/hr Operating Temp Range -13 – 122 F (cool and heat) Refrigerant R410A / 162 oz Charge Liquid / Gas 1/4″ x 3/8″ (3) – 1/4″ x 1/2″ (2) Max Lineset Length (1 zone) 98 ft Max Lineset Length (all zones) 246 ft Weight 224 lbs Dimensions (W x D x H) 37.5 × 16.5 × 52.5 inches VIEW FULL CONDENSER SPECIFICATION SHEET >>> CLICK TO VIEW COMBINATION CALCULATION TABLE >>> Install Kit Contents: 15 Feet Flared Copper Tubing x 5 15 Feet Pipe Insulation x 5 Drain Pipe (outdoor) Outdoor Condenser Rubber pads Wall Bracket for Indoor Unit x 5 Brass Adaptors for Alternate lineset sizes Installation and User Manuals *** Extend 15 foot copper lineset to 25-30-40-50-65 feet. Just $4.50 / additional foot*** contact us for details > Does not Include Electrical Wire Harness – Click here to purchase WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split* Click for Installation Tip. It is highly advised a certified HVAC technician complete installation to be eligible for warranty. See warranty details below > *5 Year Compressor – 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service – troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out. 1 YEAR PARTS WARRANTY CAN BE EXTENDED TO 2 YEARS FOR AN ADDITIONAL $72.00 SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Oak Park, Michigan and are palletized onto a single skid. Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only). SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. System comes with Free shipping – this includes delivery to any location within the Continental United States. We will ship to Canadian locations but we need to quote separately – please contact our offices. Additional freight for Canadian registries is usually around $150. (import and duties may apply). Condenser Ground Stand – Provides Flat even surface – Avoids debris obstruction Price: $73.00 Click for more Info Lineset Extension (1/4 x 3/8) – Extend included 16 ft copper lineset to 25ft – 30ft – 40ft – 50ft Price: $38.00 > $134.00 Click for more Info Condenser Bracket – Mount your condenser at any height on an outdoor sidewall Price: $78.00 Click for more Info Micro-Pump II – Required when mounting air handler on Interior wall Price: $182.00 Click for more Info Electrical Wire Harness – 16/4 Electrical Wire Harness – For Extending Evap. Length Price: $1.85 / ft Click for more Info Additional Remote Controls – Spare remote controls for the T1 Series Ductless System Price: $42.00 Click for more Info Filter Medias – Inserts into Filter Screen Slot – Choice of 4 Filtration Medias Price: $10.00 – $14.00 Click for more Info Wired Thermostat – Permanently Hard Mounts – Controls Settings w/ Remote Price: $78.00 Click for more Info Swap 1 Mount for Cassette: (+) $150 Swap 2 Mount for Cassette: (+) $300 Swap 3 Mount for Cassette: (+) $450 Swap 4 Mount for Cassette: (+) $600 Swap 5 Mount for Cassette: (+) $750 * 9k heads do not come in cassette option – need to upgrade to 12k Swap 1 Mount for Susp. Ceiling: (+) $160 Swap 2 Mount for Susp. Ceiling: (+) $320 Swap 3 Mount for Susp. Ceiling: (+) $480 Swap 4 Mount for Susp. Ceiling: (+) $640 Swap 5 Mount for Susp. Ceiling: (+) $800 *If alternate air handler types are preferred, contact us and request invoice with preferred options. Availability fluctuates. Customize your system to meet your requirements – see below table for available output options: Tri-Zone Setup 9k + 18k + 18k 9k + 18k + 24k 12k + 12k + 18k 12k + 18k + 18k 9k + 9k + 24k 12k + 12k + 24k 12k + 18k + 24k 12k + 24k + 24k 18k + 18k + 18k 18k + 18k + 24k Quad-Zone Setup 9k + 9k + 12k + 12k 12k + 12k + 12k + 12k 9k + 12k + 12k + 18k 12k + 12k + 12k + 12k 12k + 12k + 12k + 18k 9k + 9k + 9k + 24k 9k + 12k + 18k + 18k 9k + 9k + 18k + 18k 9k + 18k + 18k + 18k 9k + 9k + 18k + 24k 12k + 12k + 18k + 18k 12k + 12k + 12k + 24k Quint-Zone Setup 9k + 9k + 9k + 9k + [9/12/18/24] 9k + 9k + 9k + 12k + [12/18] 9k + 9k + 9k + 18k + 18k 9k + 9k + 12k + 12k + [12/18] 9k + 12k + 12k + 12k + 12k 12k + 12k + 12k + 12k + 12k This system available in multiple air handler (zone) capacity combinations to meet the requirements of any application. Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (54000 BTU’s) – the total output will not exceed 54000’s when all air handlers are running at full capacity simultaneously. However, overated zones will draw required capacity from other zones either running at lower modes or areas that have reached thermostat settings to obtain rated output. For example, with a 12k-12k-12k-12k+12k configuration, the total output will be along the lines of 11k-11k-11k-11k+11k when all zones are running on high/full settings at the same time. However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-12k yield. See Combination Calculation Table View the Mini Split FAQ > View the Mini Split Outline Diagram > Click to contact us >

Quint Zone Ductless Mini Split Air Conditioner Heat Pump 9k x 5 CEILING CASSETTE

Thermocore 45000 BTU AC-Heat 21 SEER 45000 BTU ENERGY STAR Ceiling Cassette Split AC 21 SEER Efficiency w/ Heat Pump Technology The 45000 BTU Quint-Zone INVERTER mini split AC with Ceiling Cassette can cool or heat Five separate zones (5 x 9000 BTU) for a total coverage area of 2000 ft² (Five 400 ft² areas). The Air handlers are discreetly recessed into a ceiling panel – only the grill is visible. 21 SEER Inverter technology with ENERGY STAR Certification provides the benefits of low operation temperatures, rapid cooling / heating, as well as maximum energy efficiency. R410A Pre-charged – 5 X 15′ Installation linesets Included. Technical Data: System Includes: 45,000 BTU INVERTER Cooling Capacity (9k x 5) 45,000 BTU INVERTER Heat Pump Capacity (9k x 5) 21 SEER – 10.80 HSPF – AHRI / ENERGY STAR Eligible* Quint-Zone Ceiling Cassette Setup Pre-Charged with ECO-Friendly R410A 1 Year Parts – 5 Year Compressor Warranty View Details > Indoor Unit – Air Handler. Outdoor Unit – Condenser of 44000-63000 BTUs Digital Multi-function LCD Remote Control.Wall Mounted thermostat. Installation Kit with 15′ x 5 of lineset. >>> Product and Installation Manual. >>> ** Rated Capacity of Condenser will be less than actual delivered capacity in above configuration. Rated Capacity is not the same as Maximum Capacity. Click here for Capacity Calculation Table. SEER is based on using with heads packaged with system. Energy label will be 17.8-21.5 ** Top Line Features: 21 SEER – 10.80 HSPF – ENERGY STAR Most Energy Efficient Quint-Zone Series on Market Quint Air Handlers Mounts Discreetly in Ceiling Dry-Mode removes moisture w/o affecting room temp Cross Flow Technology reduces noise output Compatible with over 5 Filtration medias Freon Leak Detection > Notification system Low Ambient Temperature Operation (-13° F) Restart IC: Settings restored Following Power Outage Follow-Me Function tracks Remote Location The particle filter or “pre-filter” removes dust and other air-borne pathogens before pushing the air through additional filtration medias and the refrigeration coil array. This filter is washable and comes factory installed with every ductless air conditioner system. The open channel construction of the 3M High Air Flow (HAF) filter offers low initial airflow resistance, while its unique microstructure and electrostatic charge provides effective particle capture and retention. This translates into fewer filter change outs and reduced coil cleaning. CLICK TO PURCHASE >>> The Vitamin C Filtration media releases Vitamin C into the air which softens skin and reduces stress among other therapeutic benefits. A good choice for those wanting to add some invigoration to their indoor air environment. Filter lasts over 2 years. CLICK TO PURCHASE >>> The anti-microbial effect of silver ionic technology kills allergy causing bacteria by destroying the inner configuration elements of the cell body. The nano-silver attached to the filter screen constantly releases silver ions which directly eliminates and prohibits bacteria from replicating. CLICK TO PURCHASE >>> Eliminates odors such as ammonia and deactivates harmful chemicals has such as formaldehyde. By forming positive positions on the filter surface, Electrostatic Fiber traps small dust particles, smoke and pet dander to prevent allergic reactions and neutralize odor in the air. CLICK TO PURCHASE >>> Indoor Unit (evaporator) specs Model NumberT3-OS209-EC Capacity9000 BTUAir Flow (Hi/M/Lo)374/301/257 cfmPower Supply208-230~1-60Input Power45WNoise Output (Hi/M/Lo)41/37/33 dBALiquid / Gas1/4″ x 3/8″Weight31.97/38.14 lbsDimensions (W x D x H)23.47 x 23.47 x 8.97 in. Outdoor Unit (condenser) specs Model NumberT423Q-H260Compressor BrandTOSHIBA-GMCCRated Capacity48000 BTUMaximum AH Capacity63000 BTUAir Flow4470 CFMPower Supply230 V / 60 Hz / 1PhInput Power1900W – 6440WSEER21.5 (IF USED WITH T3 MOUNT)EER10.50HSPF410.80Sound Level 64 dBAMoisture Removal 3.9 L/hrOperating Temp Range5 – 122 F (cool and heat)RefrigerantR410A / 162oz ChargeLiquid / Gas1/4″ x 3/8″ (3) – 1/4″ x 1/2″ (2)Max Lineset Length (1 zone)98 ftMax Lineset Length (all zones) 246 ftWeight224 lbsDimensions (W x D x H)37.5 × 16.5 × 52.5 inches Install Kit Contents: 15 Feet Flared Copper Tubing x 5 15 Feet Pipe Insulation x 5 Drain Pipe (outdoor) Outdoor Condenser Rubber pads Wall Bracket for Indoor Unit x 5 Brass Adaptors for Alternate lineset sizes Installation and User Manuals *** Extend 15 foot copper lineset to 25-30-40-50-65 feet. Just $4.50 / additional foot*** Does not Include 16/4 Electrical Wire Harness – Click here to purchase WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split*It is highly advised a certified HVAC technician complete installation to be eligible for warranty. See warranty details below > *5 Year Compressor – 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service – troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out. 1 YEAR PARTS WARRANTY CAN BE EXTENDED TO 2 YEARS FOR AN ADDITIONAL $72.00 SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Oak Park, Michigan and are palletized onto a single skid. Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only). SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. System comes with Free shipping – this includes delivery to any location within the Continental United States. We will ship to Canadian locations but we need to quote separately – please contact our offices. Additional freight for Canadian registries is usually around $150. (import and duties may apply). Condenser Ground Stand – Provides Flat even surface – Avoids debris obstruction Price: $73.00 Click for more Info Lineset Extension (1/4 x 3/8) – Extend included 16 ft copper lineset to 25ft – 30ft – 40ft – 50ft Price: $38.00 > $134.00 Click for more Info Condenser Bracket – Mount your condenser at any height on an outdoor sidewall Price: $78.00 Click for more Info Micro-Pump II – Required when mounting air handler on Interior wall Price: $182.00 Click for more Info Electrical Wire Harness – 16/4 Electrical Wire Harness – For Extending Evap. Length Price: $1.85 / ft Click for more Info Additional Remote Controls – Spare remote controls for the T1 Series Ductless System Price: $42.00 Click for more Info Filter Medias – Inserts into Filter Screen Slot – Choice of 4 Filtration Medias Price: $10.00 – $14.00 Click for more Info Wired Thermostat – Permanently Hard Mounts – Controls Settings w/ Remote Price: $78.00 Click for more Info Swap 1 Mount for Susp. Ceiling: (+) $160 Swap 2 Mount for Susp. Ceiling: (+) $320 Swap 3 Mount for Susp. Ceiling: (+) $480 Swap 4 Mount for Susp. Ceiling: (+) $640 Swap 5 Mount for Susp. Ceiling: (+) $800 Swap 1 Mount for Wall Mount: (-) $150 Swap 2 Mount for Wall Mount: (-) $300 Swap 3 Mount for Wall Mount: (-) $450 Swap 4 Mount for Wall Mount: (-) $600 Swap 5 Mount for Wall Mount: (-) $750 * 9k heads do not come in cassette option – need to upgrade to 12k Customize your system to meet your requirements – see below table for available output options: Tri-Zone Setup 9k + 18k + 18k 9k + 18k + 24k 12k + 12k + 18k 12k + 18k + 18k 9k + 9k + 24k 12k + 12k + 24k 12k + 18k + 24k 12k + 24k + 24k 18k + 18k + 18k 18k + 18k + 24k Quad-Zone Setup 9k + 9k + 12k + 12k 12k + 12k + 12k + 12k 9k + 12k + 12k + 18k 12k + 12k + 12k + 12k 12k + 12k + 12k + 18k 9k + 9k + 9k + 24k 9k + 12k + 18k + 18k 9k + 9k + 18k + 18k 9k + 18k + 18k + 18k 9k + 9k + 18k + 24k 12k + 12k + 18k + 18k 12k + 12k + 12k + 24k Quint-Zone Setup 9k + 9k + 9k + 9k + [9/12/18/24] 9k + 9k + 9k + 12k + [12/18] 9k + 9k + 9k + 18k + 18k 9k + 9k + 12k + 12k + [12/18] 9k + 12k + 12k + 12k + 12k 12k + 12k + 12k + 12k + 12k This system available in multiple air handler (zone) capacity combinations to meet the requirements of any application. Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (54000 BTU’s) – the total output will not exceed 54000’s when all air handlers are running at full capacity simultaneously. However, overated zones will draw required capacity from other zones either running at lower modes or areas that have reached thermostat settings to obtain rated output. For example, with a 12k-12k-12k-12k+12k configuration, the total output will be along the lines of 11k-11k-11k-11k+11k when all zones are running on high/full settings at the same time. However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-12k yield. See Combination Calculation Table

48000 BTU Quad Zone Ductless Mini Split Air Conditioner and Heat Pump 22 SEER

This 48000BTU Quad Zone Mini Split Air Conditioner by Senville is one of the most advanced and high-end split units on the market. Providing you with a variety of features including, SEER 22.5, with Air Conditioner & Heat Pump, Turbo Mode, Ionizing Air Filter, Dehumidification, Timer Function, Follow Me Function and much more.Technical Specifications Model Number SENA/48HF/MOZ Power Supply (Ph-V-Hz) 208-230V～60Hz , 1Ph Cooling (Range) 48000 EER BTU/W 12.5 SEER BTU/W 22.4 Heating (Range) 48000 COP W/W 3.6 HSPF4 10.2 HSPF5 8.3 Outdoor Operating Temp. C/F -30/-22 Minimum Circuit Ampacity (A) 30 Max. Fuse (A) 45 Outdoor unit Dimension (W*D*H) mm 952x415x1333 Dimension (W*D*H) inch 37.48×16.34×52.48 Packing (W*D*H) mm 1095x495x1480 Packing (W*D*H) inch 43.11×19.49×58.27 Net/Gross Weight Kg. 101.5/115.7 Net/Gross Weight lbs. 223.77/255.07 Refrigerant Type R410A/162.3 Refrigerant Precharge ft 125 Additional Charge For Each ft oz 0.32 Max. Combined Length ft. 80 Max. Combined Length m. 262 Max. Length Per Indoor Unit m. 35 Max. Length Per Indoor Unit ft. 115 Max. Length Per Indoor Unit m. 15 Max. Height Difference Between Indoor and Outdoor unit ft. 49