Window Well Cover Plastic Heavy-Duty Clear 19×15 in Basement Protector Durable
This plastic Window Well Cover is a heavy-duty cover manufactured from plastic. The easy-to-install cover is designed to fit window wells of 40 in. or less in length and 16 in. or less in projection from the house.
Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft Water
Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft WaterDESCRIPTION**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. Copyright © Aplus Water LLC 2020 Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.See our other items**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK — Complete water softener comes with : — 1.5 CUBIC FEET OF RESIN, — 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), — FLECK 9100SXT CONTROLLER, — TWO MINERAL TANKS, — Salt Tank, BYPASS, — COMPLETE SYSTEM 50X18X62 inches, — 3/4 inch or 1 inch connections, — (14x14x36) BRINE TANK w/safety float, — AVAILABLE IN BLUE, BLACK OR ALMOND — You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft Water**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. See our other itemsDESCRIPTION Copyright © Aplus Water LLC 2020 Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer.
TEMCo Drill-Powered Water Transfer Pump 9600 GPH Cordless Anti-Clog Made in USA
The TEMCo drill pump moves 9,600 GPH. It’s not even close. TEMCo Industrial has been building quality tools since 1968. 6 ft hose included. Fits any standard drill. No special batteries, use the drill you already own.
25 In. X 4 In. Polyethylene Rectangular Low Profile Window Well Cover
Rectangular Plastic Window Well Cover over your window well to help prevent leaves, debris, animals, rain and snow from entering. Product Depth (in) 25 in. We do not accept P.O. Boxes. Manufacturer Warranty 5 Year manufacturer warranty.
25 In. X 4 In. Polyethylene Rectangular Low Profile Window Well Cover
Hardware included to fasten to window well.
44 x 25 in. Plastic Elongated Low Profile Window Basement Egress Well Cover
The 44 in. The cover is manufactured from plastic and is durable.
44 In. W X 15 In. H X 19 In. D Durable Plastic Reversible Heavy-Duty Window Well
W X 15 In. H X 19 In. D Durable Plastic Reversible Heavy-Duty Window Well. This plastic Window Well Cover is a heavy-duty cover manufactured from plastic. The easy-to-install cover is designed to fit window wells of 40 in.
44 In. W X 15 In. H X 19 In. D Durable Plastic Reversible Heavy-Duty Window Well
W X 15 In. H X 19 In. D Durable Plastic Reversible Heavy-Duty Window Well Cover. The 44″ x 19″ x 15″. Plastic Window Well Cover is a heavy-duty cover manufactured from plastic. The easy-to-install cover is designed to fit window wells of 40 in.
44 in. W X 19 in. D Durable Plastic Reversible Heavy-Duty Window Well Cover
The 44″ x 19″ x 15″. Plastic Window Well Cover is a heavy-duty cover manufactured from plastic. The easy-to-install cover is designed to fit window wells of 40 in. or less in length and 16 in. or less in projection from the house.
Universal Fit Window Well Cover Plastic Fire Egress 400lb Capacity 44 X 38 in.
Universal Fit Window Well Cover Plastic Fire Egress 400lb Capacity 44 X 38 in. Fits most window well shapes from 41-44 in. W and 36-38 in. DConstructed from 1/8 in. thick polycarbonate for durabilityDesigned for slight overhang from the window well This universal fit egress window well cover from Shape Products is constructed from polycarbonate plastic and features a flexible design for versatile application. The molded backbar and steel insert offer maximum support. Installation is quick-and-easy with included hardware and instructions. This cover protects your well from all kinds of debris, keeping them clean, functional and safe for your family.Compatible with most window well shapes ranging from 41 in. to 44 in. W and 36 in. to 38 in. projectionConstructed from 1/8 in. thick polycarbonateKeeps wells free of rain, snow, debris and pestsBuilt with a molded backbar and steel insert for maximum supportClear UV protected material offers prolonged life for the coverIncludes: Install Instructions, Spring clip attachment hardware Material Plastic Product Weight (lb) 11 lb Returnable 90-Day Weight Capacity (lb) 400 lb Window Well Part Cover Manufacturer Warranty 7 year limited warranty Product Depth (in) 38 in Product Height (in) 2.5 in Product Length (in) 44 in Product Width (in) 44 in Thickness (in) 0.125 in ALL ELECTRONIC ITEMS ARE USA VOLTAGE 120V UNLESS OTHERWISE STATED Shipping & Delivery Times Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states. Our stock all ships from our US-based warehouses. Shipped via FedEx or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 3 business days of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer. Domestic lower 48 free shipping is expedited. We have many different shipping locations depending on the product you buy and the shipping location that you choose. We try to ship most items within 48 hours of payment Monday-Friday. Most orders are in transit for 3-5 business days but some may take longer. If you have a specific time frame please contact us before you make the purchase. Returns and payment PAY SAFE: PAYPAL PAYMENT IS ACCEPTED We offer a 30 day return policy for our products. We stand behind our products. Items can be returned for exchange or full refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after this 30-day period. Return shipping is the responsibility of buyer unless the return is a result of our mistake . We will pay for shipping replacement back to you if an exchange is requested. All electronic products are standard US voltage of 120V. Please use a voltage converter when using outside of US. We are not responsible for any damage done outside of US. If you have any questions please contact us through “Ask seller a question” link. We will respond within 1 business day or less. All returns must be done within 30 days of the date of purchase. Please note that we cannot give refunds after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible. FeedBack Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback If you have any problem with your order / any questions please before leave any type of feedback For any questions, using eBay contact system Thank you for shopping at our store.