Bluonics 20 Pack 4.5×10″ 5 Micron Sediment Water Filters Iron Rust

Do not change acidic or alkaline water levels and has no impact on pH. Looking for a system to remove TDS, you can check Bluonics RO systems. Great value! This translates to a longer life and allows better performance of all the following filters, such as Carbon Block or GAC filters.

3-Stage 20×4.5″ Big Blue Whole House Water System Spin Down Sediment Pre-filter

SimPure SPWH-3S 20″ x 4.5″ 4 Stage Filtration Big Blue Whole House Water Filtration System (1″ Inlet/Outlet Port) with Big Housings & Pressure Gauges – Spin Down Sediment Filter – Sediment Filter Cartridges, GAC Filter, Carbon Block – Whole Home Water Filters Portable Steal Frame About this item: 3-Stage Filtration: – The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. Spin Down Sediment Pre-filter: – With SimPure Whole House Spin Down Sediment Pre-filter, you can have peace of mind that it can purify the water coming into your home. – As the filter can keep the particles out of the pipes and plumbing fixtures, you don’t also need to spend on heavy repairs and parts replacements. It means less maintenance on your part. And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, wash machine, shower, and other terminal water equipment. -This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10″ BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc. -The Whole House Water Filter is supplied with 1″ Male NPT, 3/4″ Female NPT and 3/4″ Male NPT. It is suitable for ANY THREADED CONNECTOR with 1″ Female NPT or 3/4″ Male NPT or 3/4″ Female NPT. (The threaded connector is not included in the package, it needs to be purchased separately according to the specifications of the copper/PEX/CPVC water pipe). – Including an extra 200μm filter element for free. 40μm filter will capture most particulates, it’s best suited for use on Municipal (tap) or City water. If using it on Well, Lake feedwater, you can replace it with the 200μm filter element. Otherwise it may require more frequent flushing to remove the build-up of particulates due to the fine filter mesh used. Features: 4 Stage Filtration: Stage 1: Spin Down Sediment Pre-filter – keep the particles out of the pipes and plumbing fixtures. Stage 2: PP Sediment Filter – Remove dirt, silt, sand, rust and scale particles , etc. Stage 3: GAC Filter – Remove chlorine, chloramine, VOCs, etc. Stage 4: CTO Filter – Remove chlorine, chloramine, VOCs, bad taste and odor, etc – Double O-Ring ensure watertight seal – Three accessible pressure release buttons for easy filter change – Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them – Standard 1″ female NPT thread connections and long high efficiency housings for easy adaptability and high flow Main Features: – With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has 1″ female National Pipe Thread Taper (NPT) threaded input and output connections, DOUBLE O-ring to ensure watertight seal. High Capacity: Our 3-stage whole house system offering up to 150,000 gallons of clean water for a year for your family, it’s built for longevity. Features easy-to-change cartridges, transparent sediment housing, and pressure gauges. Enjoy benefits like no wastewater, consistent water pressure, chlorine-free showers, cleaner plumbing, and longer appliance life. Clear PP Housing: – Our 3-Stage water filter system consists of two NSF standard, the 1-stage clear PP housing allows you to monitor the filter cartridge usage at anytime, anywhere, making it more convenient than traditional blue filter housings. They are made of reinforced polypropylene for strength and resistance. And we’ve improved the thickness and durability of the filter bottles. You can confidently use it as a pre-filter for municipal or well water sources. Longer Lifetime: – The carbon filter has a lifetime of 3-6 months, while the sediment filter&GAC filter can last for 6-12 months. The duration depends on your water quality. With a 5μm filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. Easy Installation: – This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1” NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. Engineered for Durability: – The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. PP+GAC+CTO 20″X4.5″ 3-Stage Filter: – As the original replacement filter set for the SimPure SPWH-3S, they also fit 3 stage water filter systems and clean or blue big 20″ housings including iSpring WGB32B, WGB22B WGB12B, HB28B, BBFS-222, WH300SCGS, Geek-Pure BB-20T, BB-20B, 150233, 166201, etc. Specifications: Material: 100% food-grade ABS + Metal + Stainless Steel Filter Size: 20 * 4.5 Inch Filter Life (Months): 6 Month Flow Rate (GPM): 15 GPM Inlet/outlet Connection: 1″ female NPT thread Temperature Range: 41-100℉ (5-38℃) Pressure Range: 25 – 90 psi Package Includes: 3-Stage System: 1x SPWH-3S assembled housing kit with bracket 3x Pre-Installed Filters ( PP sediment+GAC+CTO filters) 1x Wrench 2x Screws 2x Plastic Expansion Nail 6x Installed O-rings (2 in each housing) 2x Teflon Tapes 3x Pressure Gauges 1x Punch Positioning Sticker 3-Stage System+Spin Down Filter: 1x SPWH-3S 3-Stage Whole House System 1x Spin Down Sediment Pre-Filter (40 Micron+200 Micron) 3-Stage System+SP+1 Set Filter: 1x SPWH-3S 3-Stage Whole House System 1x Spin Down Sediment Pre-Filter (40 Micron+200 Micron) 1x Extra 20″x4.5″ PP Fillter 1x Extra 20″x4.5″ GAC Fillter 1x Extra 20″x4.5″ CTO Fillter Please Note: Not all of the items are included in the package, please choose the “Item Model” you need in the selection. Troubleshooting: Q: Leaks between filter head and filter bowl of housing? A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections? A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Do not over tighten. Q: Leaks from the pressure release button? A: The pressure release button has a screw under the bracket.Simply tighten that screw and the leaking should stop Q: Water Pressure is slowing after some time? A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. (review cartridge instructions) Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge? A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean.ShippingReturnFeedbackPaymentContact usShipping Fast shipping by USA LOCAL FAST SHIPPING, All of the products will be shipped out within 1 working day after we received the payment and your contact phone number. Why Choose the USA Stock? 1. USA Local Shipping, No Extra Customs Cost to the USA 2. Fast Delivery: 2-5 Working days Delivery 3. Best After-Sales Service!!!Return1. Accept Return in 60 days for refund or replacement, goods in resalable condition. 2. Offer two year for repair warranty. 3. Contact for address and reference number before return(note: unannounced parcel may be returned to wrong address, seller will not be responsible for this). 4. No factory warranty for the man-made damage.FeedbackPlease leave five stars positive feedback positive comment and Five-Stars. Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything. communication Please! PaymentWe accept all major Credit cards, PayPal, and Google Pay. Taxes may be applicable at checkout.Contact usSERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product.

WATTS F109009 CARBON BLOCK FILTER 2.5″x10″ 5 MICRON HYDRONIX CB-25-10 CASE OF 20

YOU WILL RECEIVE: TWENTY (20) CARBON BLOCK FILTERS 2.5″X 10″ 5 MICRON HYDRONIX CB-25-1005Perfectly Compatible with Watts Part # F109009FITS ALL STANDARD 10″ HOUSINGS Brand New Hydronix filters offer high performance at the lowest price point. Hydronix filters simultaneously remove chlorine, taste and odor, and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 10 micron nominal sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter. ALL FILTERS ARE INDIVIDUALLY WRAPPED AND NSF CERTIFIED Get It Fast!! Get a Tracking Number!! For Only $35.00 More, Select USPS Priority Mail at Checkout and Receive Your Item in 2-3 Days and Get a Tracking Number and Up to $50 Insurance Protection. NOTE: USPS does not offer tracking numbers for First Class shipping.WARNING: Domestic USPS packages are not insured unless Priority Mail or Express shipping are purchased. Don’t pay more for less! We ship sooner, faster, and for less than our competitors. We ship immediately. We charge you less than our competitors charge you for slower service. We combine shipping upon request. We will match all verified competitor’s prices. We ship internationally. Service makes the difference! NOTE: As a precaution, change your flow restrictor or capillary when you change your membrane.

WATTS F109009 CARBON BLOCK FILTER 10″ 5 MICRON MATRIKX CTO 32-250-125-975

YOU WILL RECEIVE: ONE (1) CARBON BLOCK FILTER 2.5″X10″ 5 MICRON MATRIKX CTO 32-250-125-975 Or: You will receive the upgraded version that is not manufactured in the USA. Martikx part #: 32-250-10-Green.Perfectly Compatible with Watts Part # F109009FITS ALL STANDARD 10″ HOUSINGS Brand New MATRIKX CTO® filters are the most widely used carbon block devices in the world and provide previously unattainable performance at the lowest price point. MATRIKX CTO® filters simultaneously remove chlorine, taste and odor, and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 micron nominal sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter. The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop. This enables a MATRIKX CTO filter to deliver extended life while removing sediment, chlorine, taste and odor, and organic contaminants from water, aqueous solutions or suspensions. The MATRIKX CTO® is also widely used in filtering organic solvents. The MATRIKX CTO® is ideal for use in residential and commercial water purification systems, food service, pre-and post-RO systems. MATRIKX CTO® or GAC? The MATRIKX CTO® is manufactured from high purity acid-washed activated carbon. Its dirt-holding capacity and the absence of carbon fines makes the MATRIKX CTO® the filter of choice. A superior carbon block, MATRIKX + CTO®/2 combines both high performance and integrity with an exceptional cost-to-performance value. As a result, MATRIKX + CTO®/2 virtually renders GAC filters obsolete by comparison. ALL FILTERS ARE INDIVIDUALLY WRAPPED AND NSF CERTIFIED Get It Fast!! Get a Tracking Number!! For Only $35.00 More, Select USPS Priority Mail at Checkout and Receive Your Item in 2-3 Days and Get a Tracking Number and Up to $50 Insurance Protection. NOTE: USPS does not offer tracking numbers for First Class shipping.WARNING: Domestic USPS packages are not insured unless Priority Mail or Express shipping are purchased. Don’t pay more for less! We ship sooner, faster, and for less than our competitors. We ship immediately. We charge you less than our competitors charge you for slower service. We combine shipping upon request. We will match all verified competitor’s prices. We ship internationally. Service makes the difference! NOTE: As a precaution, change your flow restrictor or capillary when you change your membrane.

Bluonics 2-PK Carbon Block 10 x 4.5″ Whole House Charcoal Water Filters 5 Micron

Pure Water Clean Air in Every House Give us a call Send us a message Our Store Seller Profile Feedback Save this seller Contact Bluonics 2-PK Carbon Block 10 x 4.5″ Whole House Charcoal Water Filter 5 Micron Description2 Pcs Block Activated Carbon Filters 4.5 x 10″ (5 Micron) – Block Carbon Filters (5 Micron) are similar in their performance to that of granulated GAC filters, being made of fine coconut shell charcoal carbon tightly compressed forming a cylinder block. Solid-block activated charcoal is superior at adsorption because all the water molecules are forced to travel through the compressed charcoal. Also since it is made of packed carbon it helps to trap suspended particles and dirt. They are excellent in removing chlorine, pesticides, herbicides, bad taste & odor, organic solvents, chemicals, and contaminants that contribute to bad taste and odor leaving our water healthier and great tasting. Flow rate: 5-15 GPM (Depend on Feed Water Pressure). Maximum Pressure: 80 psi, SUGGESTED WORK PRESSURE: UNDER 50 PSI, Temperature:40-110°F/5-45°C Save money and time. Average lifetime 6 months. (Depends on your water quality) Compatible with systems from 3M, APEC, Aqua-Pure, Aquasana, Culligan, Costway, DuPont, GE, Geekpure, Glacier Bay, Global Water, Olympia, Pentek, Smart Aqua Life, The Perfect Water, US Aqua, Whirlpool All mentions of brand names or model descriptions are made strictly to illustrate compatibility. All brand names are registered trademarks of their respective owners. tasting. SAFE & RELIABLE: Bluonics whole house filter reduces many impurities from your water by 99% and protects your family and appliance from chlorine, pesticides, odor, herbicides, industrial solvents, VOCs, organic solvents, and various other contaminants. No more smelly or bad-tasting water. Bluonics Carbon filters are environmentally friendly, chemical Free, no chlorine, no change of taste, color, and odor. Do not change acidic or alkaline water levels and has no impact on pH. QUALITY: Fits most standard size 4.5 x 10” Filter housings. Is highly effective for both residential and commercial water purification and can be used for the city/municipal EFFECTIVE: removes chlorine, bad taste, odor, and many impurities from tap water to offer sparkling clean and great tasting water throughout your whole house. Please note this filter is not a Reverse Osmosis and will NOT reduce (TDS) Total Dissolved Solids from your water. Looking for a system to remove TDS, you check Bluonics RO systems. Great after-sales customer support: 30-day money-back guarantee. Extended manufacturer warranty. Lifetime tech support from Bluonics in Sacramento, California, USA Payment Shipping Give us a call Send us a message