Brainerd 50 Pack 1-1/8″ Cabinet Knob Venetian Bronze with Copper Highlights
Finished in a soft, muted bronze with subtle copper highlighting. Installs in minutes without the need for power tools.
27/64″ x 9/16″ x 3/4″ #3 Cork Stoppers
Diameter: 27/64″ Diameter 2: 9/16″ Length: 3/4″ Material: Cork Nominal Size: #3 Type: Stopper Application: Popguns A stopper or plug is used to temporarily seal a bottle opening.
5mm Cross Section O-Ring Silicone Rubber Seals VMQ FOOD GRADE 5mm – 590mm ID Red
Material: Silicone Rubber (VMQ). Chemical resistance: Dry heat, High – aniline point oils，Chlorinated DI – phenyls，Food processing applications，Excellent ozone resistance, Water. Silicone rubber is one of the commonly used materials for O-Rings.
#8 x 2″ 18-8 Stainless Steel Phillips Oval Head Sheet Metal Screws
Diameter: #8 Length: 2″ Material: Stainless Steel Head Style: Oval (Phillips) Thread Length: Full Hardness: 18-8 Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
#8 x 2″ 18-8 Stainless Steel Slotted Hex Washer Head Sheet Metal Screws
Diameter: #8 Length: 2″ Material: Stainless Steel Head Style: Hex Washer (Slotted|Hex) Thread Length: Full Hardness: 18-8 Type: Sheet Metal Screw Diameter 3: 5/16″ A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions. Sheet metal screws make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.
1/4″-20 x 6″ Zinc Plated Steel Coarse Full Thread Hex Head Tap Bolts
Diameter: 1/4″ Length: 6″ Material: Steel Finish: Zinc Head Style: Hex (7/16″ Wrench) Thread Size: 20 (Coarse) Style: Full Thread Type: Tap Bolt A tap bolt is a bolt threaded all the way to the head.
1/4″-20 x 4″ Zinc Plated Steel Coarse Full Thread Hex Head Tap Bolts
Diameter: 1/4″ Length: 4″ Material: Steel Finish: Zinc Head Style: Hex (7/16″ Wrench) Thread Size: 20 (Coarse) Style: Full Thread Type: Tap Bolt A tap bolt is a bolt threaded all the way to the head.
1/4″-20 x 4-1/2″ 18-8 Stainless Steel Coarse Thread Hex Cap Screws
Diameter: 1/4″ Length: 4-1/2″ Material: Stainless Steel Head Style: Hex (7/16″ Wrench) Thread Size: 20 (Coarse) Thread Length: 3/4″ Hardness: 18-8 Type: Cap Screw A hex cap screw has a hexagonal head, designed to be driven by a wrench.
1/4″-20 x 4″ 18-8 Stainless Steel Coarse Thread Hex Cap Screws
Diameter: 1/4″ Length: 4″ Material: Stainless Steel Head Style: Hex (7/16″ Wrench) Thread Size: 20 (Coarse) Thread Length: 3/4″ Hardness: 18-8 Type: Cap Screw A hex cap screw has a hexagonal head, designed to be driven by a wrench.
1/2″-13 x 2-1/2″ Plain Grade 5 Steel Coarse Thread Flat Head Plow Bolts
Diameter: 1/2″ Length: 2-1/2″ Material: Steel Finish: Plain Head Style: Flat Thread Size: 13 (Coarse) Thread Length: Full Hardness: Grade 5 Type: Plow Bolt Application: Gang Plows|Road Graters|Scoop Shovels A plow bolt is similar to a carriage bolt, except the head is flat or concave. The recess in the mating part must be designed to accept the particular plow bolt.