Ultra Custom Pools

Item Tag: 6.5"

Everbilt 1/4 HP Aluminum Sump Pump w/ Tether Float Switch HDSP25W NEW OPEN BOX.

TESTED, NEVER USED, OPEN BOX, WORKS. The Everbilt 1/4 HP Aluminum Sump Pump with Tether Float Switch HDSP25W is a reliable and efficient pump designed for negative head installations. With a maximum working pressure of 100 psi and a maximum flow rate of 50 GPM, this pump is suitable for various plumbing needs. The compact dimensions of 11″ x 8″ x 6.5″ and a weight of 8.5 lbs make it easy to install and handle. Additionally, the manufacturer does not offer a warranty, but this model has been tested and proven to be a great choice for pumping applications. lot 41-2B-1

Everbilt 1/4 HP Aluminum Sump Pump w/ Tether Float Switch HDSP25W NEW OPEN BOX—-

TESTED, NEVER USED, OPEN BOX, WORKS. The Everbilt 1/4 HP Aluminum Sump Pump with Tether Float Switch HDSP25W is a reliable and efficient pump designed for negative head installations. With a maximum working pressure of 100 psi and a maximum flow rate of 50 GPM, this pump is suitable for various plumbing needs. The compact dimensions of 11″ x 8″ x 6.5″ and a weight of 8.5 lbs make it easy to install and handle. Additionally, the manufacturer does not offer a warranty, but this model has been tested and proven to be a great choice for pumping applications. lot 41-2B-1

8000 BTU Portable Air Conditioner 200 sq. ft 8000 BTU/H (ASHARE)/5100 BTU/H SACC

Cooling Capacity: 8000 BTU/H (ASHARE) / 5100 BTU/H (SACC). Stay cool, dry, and comfortable with our ROVSUN Portable Air Conditioner. Versatile Fan Mode: Whether you want to enhance air circulation or create a refreshing breeze, the fan mode with 2 fan speed options allow you to enjoy gentle to large airflow, promoting better ventilation and maintaining a comfortable atmosphere.

1/3 HP Submersible Sump Pump Stevens Pump

Internal air pressure diaphragm switch. NO FAIL switch. Cycle tested to 4 million cycles. Very well built USA sump pump. Pump does not suck from the bottom. It is side intake.

Custom Building Products PolyBlend Plus Non-Sanded Grout 10 lbs

Custom Building Products Non-Sanded Polyblend Plus Grout 10lb✚ Brighter, More Vivid Finished Color ✚ Enhanced Color Consistency ✚ Better Resistance to Efflorescence *Note if flat rate shipping is selected each bag will ship in its own box via USPSPolyblend® Plus Non-Sanded Grout Suitable Uses:• Use to fill joint widths up to 1/8″ (3.2 mm)• May be used for both floor and wall installations• Interior and exterior applications• Residential and commercial applications• Countertops, tub surrounds, showers and high traffic areas• Submerged conditions (swimming pools, spas, water features and fountains) Suitable Substrates:• Vitreous, semi-vitreous or non-vitreous tile• Impervious porcelain and glass tile• Cement-based precast terrazzo• Natural stone tile Standards *Polyblend® Plus Non-Sanded Grout exceeds ANSI A118.6 standards *On non-pallet shipments each bag will be bagged in plastic before shipping to help prevent moisture damage during shipping.

6 1/2″ Boot repair Bracket NO Weld for 1″ loose broke POSTS slip IN Sq tube P.P.

WE ARE A CUSTOM WROUGHT IRON HAND RAILING AND MISC METAL FABRICATION.SHOPThis is a PAT PENDING design. The original maker of these awesome repair feet. We wanted to help people save time and Money!Yes, we have all seen it and we will take full advantage of our Provisional Royalty Rights soon! 😉 Made right here in the USA in PA!!Thank you all for letting me know and supporting my small business!!ANVIL™RAIL POST REPAIR BRACKET This steel foot SLIPS ON OVER THE RAILING EXISTING 1″ LEGS/POST YOU GET 1 WITH THIS AUCTION THIS IS FOR LEGS/POSTS THAT ARE 1 ” THICK. Perfect way to repair your rails affordable & hassle-free!BASE plate is 3″ x 3″ square with (4) 3/8″ HOLES FOR BOLTING DOWNSquare Tube is 1 1/2″ x 1/4″ thick welded to a base plate. Tube is 6 1/2″ high and a 1″ existing post pockets INSIDE the Square tube.Works on hollow or solid square posts.Add a strong adhesive or epoxy to the repair foot. Slide post into the bootOne set screw is on the side to re-secure railing leg then bolt down base plate. You will need 1 1/2″ covers to snap over the base of repair bracket to cover up the bolt heads.We have a wide variety of sizes to show you in the last picture!We are the Original maker INVENTOR of these Railing Repair feet and are in a PAT PENDING. Custom fabricated in Pennsylvania with steel sourced in America. Our certified welders and blacksmiths take Great care with our products. Right here is a great USA made product! These feet are perfect for those looking to improve their home’s safety and functionality. With these repair feet, you can rest assured that your handrail will remain sturdy and safe for years to come! Visit My eBay Store: ANVIL CUSTOM IRON WORK Check out our store for other size railings. We stock a full line of repair feet, base covers, hardware and more!Thank you for checking us out and supporting our small business!Please email us if you need a different size and we will make an auction for you! TERMS OF SALE Please leave positive feedback. Of course, if you have any question regarding the transaction, please feel free to contact me before you leave feedback. I will work to give you satisfaction on your purchase. Feedback is left once the sale is complete.NOTE: We ENCOURAGE our buyers to email us for any questions they may have. KNOW WHAT YOU ARE BUYING by letting US know what information you need from us. Our goal is to have a happy customer, one who will not hesitate to buy from us again because they know they are getting the BEST! Shipping combines automatically when more than one item is purchased at checkout. Please check out my other items for sale in my store, Thanks for your business!