60A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB US
Product Description Features Thlevel solar charge controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Solar Charge Regulator can fully meet your home Photovoltaic system (including home lighting system) requirements. Connection steps: Connect the battery to the charge regulator. Connect the solar panels to the charge regulator. Connect the consumer to the charge regulator. NOTE: The reverse order applies when deinstalling. The wrong connection sequence will damage the controller. Specifications Load: Light Control System Voltage: 12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(defaul,adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(defaul,adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V Rated current: 60A Self-consume:(2)Solar panels —> (3)DC load. Disconnect order is (1)DC load —>(2)Solar panels —> (3) Battery Q: What battery type is this controller supported? A: Pay attention to this regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Q: Why the LCD screen become blank? A: When the battery voltage is too low, the controller will stop to output ( ≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V (default), 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V(default). Q: Why does the controller display 14.4V? A: If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don’t worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V. Q:How is it set to charge battery during the day and turn on at dusk? A: Press the [DOWN]button to ON/OF load manully at main display （The load can’t be switched manually in the light control state.） There are 3 options for the working mode. Mode 1 : [24HR] >> Load output 24 hours Mode 2 : [1-23HR] >> Load on aftersunset and dosed after setting hours Mode 3 : [0H] >> Dusk to Dawn
60A MPPT Solar Panel Charge Controller 12V/24V LifePO4 Regulator Auto Dual USB
NEW-00021 CAR METERCAR DOOR HANDLEOXYGEN SENSORWINDOW SWITCHLEVELING LIFT KITHUB BEARINGTOOLSEMBLLEM–> 60A MPPT Solar Panel Charge Controller 12V/24V LifePO4 Regulator Auto Dual USBPRODUCT DESCRIPTION Specifications Solar Charge Controller: 60A Battery Voltage/System Voltage:12V/24V Auto Max PV Open Circuit Voltage:30V Self-consumption:≤10mA Loop Voltage Drop:≤0.3V Battery Typel:User, Flooded, AGM, GEL, LifePO4, Lithium USB Output:5V/2A×2 Operating Temperature:-4℉~+122℉ Protection Category:IP44 Humidity:95%, no-condensing Product size: 170*92*45MM Features 【Solar Charge Controller】The solar charger controller compatibility with 12V 24V system. It helps you manage the working of solar panels and battery in solar systems automatically with the built-in industrial microcontroller. Dual USB output 5V/2A to support mobile phone charging. 【SAFE TO USE】Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection.Smart LCD display shows the charging status and battery status to make you more assured of charging,Besides regular input, output, and battery protection, protection of over-current from the solar panels are applied. 【LCD Display】Comes with a display that can clearly indicate the status and data, solar charger can be conveniently switched modes and parameter configurations. 【Battery Type】Adaptable to User, Flooded, AGM, GEL, LifePO4, Lithium, and other customized battery types. For protecting the lifespan of your battery, once the voltage of the battery is out of range, the solar controller will turn off automatically. 【Easy to Use】Charge controllers for solar panels should connect the battery first, then the solar panel, and finally the load.LCD display, adjustable parameter, suitable for home, industrial, commercial etc. Correct link, working instructions: Make sure the battery has sufficient voltage for the controller to recognize the battery before the first installation. 1.Connect the battery to the solar controller, the solar charge controller automatically recognizes the voltage. 2.Connect the solar panels to the charge regulator. 3.Connect the consumer to the solar charge controller.About UsPaymentShippingReturnsContact Us Welcome to our store, your support is the biggest driving force for us to move forward. Our main business is solar street lights, solar controllers, solar panels and so on. The product is directly connected with the factory to ensure product quality. Please rest assured to buy, we will provide you with a perfect shopping experience!We accept payment via Paypal only.Payment must be completed within 10 days.If you have any problems about payment, please contact us via ebay message.We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.If you have any issue about Item. Please contact us with 7 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via “Ask seller a question” . We will reply your email within 24 working hours.About Us Welcome to our store, your support is the biggest driving force for us to move forward. Our main business is solar street lights, solar controllers, solar panels and so on. The product is directly connected with the factory to ensure product quality. Please rest assured to buy, we will provide you with a perfect shopping experience!PaymentWe accept payment via Paypal only.Payment must be completed within 10 days.If you have any problems about payment, please contact us via ebay message.ShippingWe only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.ReturnsIf you have any issue about Item. Please contact us with 7 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.Contact UsWe strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via “Ask seller a question” . We will reply your email within 24 working hours.
Morningstar TS-MPPT-60-600V-48-DB-TR-GFPD Charge Controller 60A 48VDC 3200W
Stellavolta.com is an authorized dealer and we only sell new products. Review this product’s handling time by clicking on the “Shipping and Payments” tab above. Ships primarily via USPS, however, we may ship UPS Ground or FedEx Ground. Faster shipping options available. We accept PayPal and all major credit cards. Morningstar TS-MPPT-60-600V-48-DB-TR-GFPD Charge Controller Pre-Wired with Ground Fault Protection Device 60A 48VDC 3200W. Once they’re gone, they’re gone! Shown with optional Morningstar TS-M-2-600V Digital Meter. Morningstar TS-MPPT-60-600V-48-DB-TR-GFPD Controller leverages Morningstar’s innovative TrakStar&trade MPPT technology and our 20+ years of power electronics engineering excellence, to enable the widest input operating voltage range available from a solar array, wind turbine or hydro input. This controller’s standard and DB versions are for off-grid applications. Rated for 60 Amps, the TriStar MPPT 600V controller does much more than efficiently charge batteries; it also provides remote communications, data logging, adjustability and metering. In fact, the TriStar MPPT 600V controller is the only 600-volt PV controller to offer open communication protocols and true Ethernet-enabled functionality. Key Features & Benefits Morningstar’s products are built from the inside out to deliver more than twice the industry average operating life. The TriStar MPPT 600V charge controller delivers high reliability and excellent performance and features: The industry’s best-in-class power efficiency Morningstar’s advanced 4-stage charging algorithm to optimize battery health Robust thermal, mechanical and electrical design Environmentally optimized and equipped with extensive electronic protections Industry standard open communication protocols and interfaces for system networking, monitoring and communications Superior lightning protection from nearby lightning-induced voltage/current spikes Applications The TriStar MPPT 600V charge controller’s high voltage capability and flexible design enable several application scenarios including: Adding modules incrementally with no string sizing issues Off-grid PV systems greater than 150 Voc with long wire runs from the array to the controller New installation grid-tie PV systems with battery back-up Retrofitting string PV inverter systems to later add battery back-up without changing the PV array configuration Battery-based Wind systems Other brands survive harsh conditions. Morningstar thrives in them. With more than 25 years of experience and well over four million products in over 100 countries – most of them still in operation – Morningstar has truly earned its reputation for building the “world’s leading solar controllers.” At Morningstar, the word “reliability” means a lot more than a marketing adjective. Morningstar’s employee-owned culture works hard to maintain the lowest hardware failure rate in the industry, because our own reputations literally ship with every product. That’s why system designers of the most mission-critical solar energy installations around the world insist on Morningstar components, and why you should too on your next project. From mineral mines in South America to telecom repeater stations in Canada, from gas wells in the Middle East to mountain peaks in Nepal, Morningstar technology and legendary quality make the difference between success and failure – and make renewable energy a practical, cost-effective, and long-term solution. TrakStar MPPT All Morningstar MPPT (Multiple Power Point Tracking) Controllers have TrakStar™ technology to maximize energy harvest by operating the system at the maximum power level possible. Rapidly sweeps the entire solar I-V curve Recognizes multiple power points during shading or mixed solar arrays Provides superior performance at sunrise and low solar insulation levels TrakStar helps reduce system cost in three ways: Enables using less expensive high voltage (on-grid) modules for off-grid battery charging Reduces cable sizes by using a higher voltage solar array to charge a lower voltage battery Decreases the number of solar modules needed based on the extra energy harvest (boost) Exchanges or Returns Please contact us before returning or exchanging an item to receive a return authorization (RA). Items returned to us without receiving a return authorization will be returned to you at your expense. We accept exchanges and returns for unopened items or damaged/defective products within 14 days of receipt of shipment. A 20% restocking fee may apply to multiple quantity returns or large ticket items. A 20% restocking fee will apply for all products that ship freight. Exchanges and returns are not accepted after 14 days of receipt of shipment. Unopened Products To make an exchange or return for an unopened product, please contact us and obtain a Return Authorization. If the exchanged or returned product is unopened with all original accessories, manuals, packaging, and/or shrink wrap, you will be responsible for return shipping. If the product was sold with free shipping, shipping charges to deliver the item will be deducted from the refund amount. A refund to your method of payment will be processed within one week of receiving an authorized return minus any applicable shipping charges. Damaged/Defective Products To make an exchange or return for a damaged/defective product, please contact us and obtain a Return Authorization. If the product is returned for being damaged/defective, we will provide a return shipping label for domestic shipping costs. If we test and confirm the product is damaged/defective and receive the product along with all original accessories, manuals, and packing, we will provide a refund for the purchase price of the product, plus domestic shipping charges, if any, assessed at the time of purchase. International shipping charges, if any, will not be reimbursed. A refund to your method of payment will be processed within one week of receiving an authorized return. If we test and confirm the product is in full working order, a refund will not be provided and you will be responsible for providing a return shipping label to have the product returned to you.
Square D HGL36060 60A 3P 600V Circuit Breaker
Breaker Hub specializes in the sales, purchasing, removal, rental, dismantling.
WADSWORTH “MAIN” 60A 250V Block and Fuse Holder Pullout Cat. No. 8038-57 New!!
WADSWORTH “Main” 60 Amp 250 Volt Fuse Holder Pullout and Block New! new never installed fuse holder and block. (we have used Fuse Holder Pull out without block included listed in a different ad).