Ultra Custom Pools

Item Tag: 60A

60A 12V/24V PWM Solar Panel Regulator Charge Controller Auto Focus Tracking

60A 12V/24V PWM Solar Panel Regulator Charge Controller Auto Focus Tracking Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 60A System Voltage: 12V / 24V Max Solar input(Solar Panel): 36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) 60A Solar Charge Controller User Manual  PaymentShippingReturnsAbout UsPaymentShippingReturnsAbout Us We accept PayPal, major credit cards, and other methods supported by eBay Managed Payments. We offer FREE shipping on all orders! Your order will be dispatched within 24 hours receiving payment and you should expect to receive it two to five days after dispatch.   If you are not completely satisfied within 30-days of your purchase,  you can return the product and get a full refund or replacement (your choice).  Our return process is eBay managed and very easy to follow.  We will be responsible for the return shipping cost of the damaged or wrong items. We are a family owned business located in the beautiful western Pennsylvania. We began as a wholesale jewelry and fashion importer. After successfully selling a few precison jewelry scales on a major online marketplace in 2009, we decided to transform into a professional weight scale distributor. Then soon expanded into other great product categories.  See our other itemsFeatures —Build-in industrial micro controller. —Large LCD display, all adjustable controlling parameter of the system. —Fully 3-stage PWM charge management. —Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. —Dual MOSFET Reverse current protection, low heat production LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value. System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications —Load: Light Control —Model: 60A —System Voltage: 12V / 24V —Max Solar input(Solar Panel): 36V(24V battery) 18V(12V battery) —Max input power: 390W(12V system); 780W(24V system) —Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) —Float charge: 13.7V(default, adjustable)，12.0-15.0V —Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V —Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V —Rated current: 60A —Self-consume:<10mA —Batteries: Only fit for OPEN, AGM, GEL —Operating Temperature:-35℃~60℃ —USB output: 5V/2A Max —Dimension:18.3cm x 9cm x 4.5cm (60A) Package Included —One (1) 60A Solar Charge Controller —User Manual 60A 12V/24V PWM Solar Panel Regulator Charge Controller Auto Focus Tracking Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 60A System Voltage: 12V / 24V Max Solar input(Solar Panel): 36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) 60A Solar Charge Controller User Manual  Payment We accept PayPal, major credit cards, and other methods supported by eBay Managed Payments. Shipping We offer FREE shipping on all orders! Your order will be dispatched within 24 hours receiving payment and you should expect to receive it two to five days after dispatch.   Returns If you are not completely satisfied within 30-days of your purchase,  you can return the product and get a full refund or replacement (your choice).  Our return process is eBay managed and very easy to follow.  We will be responsible for the return shipping cost of the damaged or wrong items.About Us We are a family owned business located in the beautiful western Pennsylvania. We began as a wholesale jewelry and fashion importer. After successfully selling a few precison jewelry scales on a major online marketplace in 2009, we decided to transform into a professional weight scale distributor. Then soon expanded into other great product categories.  See our other items Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 60A System Voltage: 12V / 24V Max Solar input(Solar Panel): 36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) 60A Solar Charge Controller User Manual 

Renogy 12V 200AH Deep Cycle AGM Battery Rechargable for RV Solar Marine Off-Grid

This Renogy Deep Cycle Battery is a reliable power source for your off-grid needs. With a rated capacity of 200Ah, it can provide long-lasting power for your recreational vehicle, marine vessel, or home/garden setup. The battery is made of high-quality materials, including ABS container material, and is designed to withstand all daylight conditions. It is a DC current type battery that is rechargable using solar power. The battery has a maximum charging current of 60A and a maximum discharging current of 2000A for 5 seconds. This product line of Renogy Deep Cycle Batteries is recommended for indoor use and has a voltage of 12V. The battery has no problem running your off-grid system without relying on the grid, and you can be sure of its quality as it is a Renogy product.