14mm x 24mm Zinc Plated Class 8 Steel Flat Washers
Diameter: 15mm Diameter 2: 24mm Thickness: 3mm Material: Steel Finish: Zinc Hardness: Class 8 Type: Flat Washer Specifications: SAE A flat washer is a thin, usually round, plate with a hole in the middle that is normally used to distribute the load of a threaded fastener. USS flat washers have a large, wider body. SAE flat washers are machined to a tighter specification and have a smaller outside diameter.
18mm x 34mm Plain Class 10 Steel Flat Washers
Diameter: 19mm Diameter 2: 34mm Thickness: 3mm Material: Steel Finish: Plain Hardness: Class 10 Type: Flat Washer Specifications: DIN 125 A flat washer is a thin, usually round, plate with a hole in the middle that is normally used to distribute the load of a threaded fastener. USS flat washers have a large, wider body. SAE flat washers are machined to a tighter specification and have a smaller outside diameter.
12mm-1.75 Zinc Plated Class 8 Steel Coarse Thread Castle Nuts
Diameter: 12mm Diameter 2: 22mm Thickness: 15mm Material: Steel Finish: Zinc Driver Type: #19 Wrench Thread Size: 1.75mm (Coarse) Hardness: Class 8 Type: Castle Nut Specifications: DIN 935 A castle nut, also known as a slotted nut, is a nut with slots (notches) cut into one end. The bolt or axle has one or two holes drilled through its threaded end. The nut is torqued properly and then, if the slot isn’t aligned with the hole in the fastener, the nut is rotated to the nearest slot. The nut is then secured with a cotter pin or safety wire.
12mm-1.75 Zinc Plated Class 8 Steel Coarse Thread Flange Nylon Insert Lock Nuts
Diameter: 12mm Diameter 2: 20mm Thickness: 16mm Material: Steel Finish: Zinc Driver Type: #18 Wrench Thread Size: 1.75mm (Coarse) Hardness: Class 8 Style: Nylon Insert Type: Flange Nut Specifications: DIN 6926 A flange nut has a wide flange at one end that acts as an integrated, non-spinning washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface.
4 Pack Heavy Duty Gate Hinges, 304 Stainless Steel Gate Hinge for Wooden Fence
Widely used in fence gate, farm gate, barn gate, etc. No need to worry about welding breaks or hinge breaks. 【Easy To Install】: Place the gate hinges on the mounting plane and mark the location of the mounting holes.
Flush Bracket Wall Hanging Mount Canvas Frame Plate Slide Small Fixing Stainless
Material:Stainless Steel.
8 Pcs Bow Shaped Cabinet Handle Zinc Alloy Bow Shape Cabinets Knobs with Scre…
8 Pcs Bow Shaped Cabinet Handle Zinc Alloy Bow Shape Cabinets Knobs with Screws Bow Tie Dresser Knobs Bow Shaped Drawer Cupboard Pulls Suitable for Wardrobe Drawers Storage Cabinets Bookcases (8-PCS).
1/4″ x 2″ Zinc Plated Steel Round Wire Lock Pins
Diameter: 1/4″ Length: 2″ Material: Steel Finish: Zinc Shape: Round Type: Snapper Pin
8PCS Car Door Handle Protector, Rhinestones Non-Shedding 8 PCS Silver & Black
8PCS Car Door Handle Protector, Rhinestones Non-Shedding Door Handle Scratch Protective Sticker, Sparkling Diamond Vehicle Exterior Decorative Sticker, for Most Vehicles (Silver & Black). Sparkling Accents: The surface of the door handle protective film is fully encrusted with simulated rhinestones.
8 PK Edge Finger Tab Pull for Cabinets Kitchen Aluminum 11.81″ L-Shaped Handles
☆ Foezoe furniture pulls are ideal design for closets, dressers, cupboards, cabinets, drawers, doors and wardrobes. Bathroom /kitchen cabinet pulls. Black, Gold, Silver colors for you to choose from.