Ultra Custom Pools

Item Tag: 9.4 in

1 HP Submersible Cast Iron Sewage Pump 5220 GPH Float Switch Sump Pump Basement

1 HP Submersible Cast Iron Sewage Pump, 5220 GPH Float Switch Sump Pump w/ 2” NPT Discharge for Basement, Septic TankAbout the product:SUPERIOR PERFORMANCE – The 1HP submersible sewage pump is a powerful and reliable device that can tackle deep draining jobs with ease; It features a high-efficiency oil-filled split capacitor motor that offers superior performance; With a high flow rate of 5220 GPH and maximum head up to 24 feet, this pump is ideal for ensuring cleanliness and safety in residential areas, commercial establishments, and public facilities AUTOMATIC AND MANUAL OPERATION – The electric sewage pump comes with a 14.4ft long power cord and a piggyback plug which allows for both manual and automatic operations; With its adjustable float switch, the pump can automatically activate when the water level reaches 47CM/18.5’’ and turn it off at 10.5CM/4.1’’, to avoid running dry and prevent damage caused by low water levels SAFE OPERATION – The built-in thermal overload protection system will automatically shut off the pump when it reaches 266℉ to prevent dry-running or any damage to the motor; DO NOT use the pump in water over 40℃/104℉; To prevent freezing in cold weather, ensure that the pump is completely immersed in water before starting; The metal ring on top is used to tie the rope when submerging or lifting the sump pump; NEVER lift it directly by the power cord as this can cause permanent damage DURABLE AND CLOG-FREE – The sewage pump is built to last with its durable cast iron housing that undergoes electrophoresis treatment, which is sturdy and resistant to rust and harsh environmental conditions; It boasts a 2-inch NPT discharge to effortlessly handle the solid with a diameter less than 0.79’’ and a non-clogging vortex impeller, keeping the pump running continuously; It is recommended to keep the pump in a well-ventilated and dry area when not in use for an extended service life WIDE APPLICATIONS – This high-quality submersible sump pump is a reliable solution for a range of residential and commercial drainage needs; It is specifically designed for removing sewage, wastewater, and rainwater in basements, sump pits, bathrooms, yards, or toilets, helping you do the dirty, smelly tasks and keeping your home dry and clean Product and Package Information:Color: BlackPower Cord: 14.4FT Horse Power: 1HP Discharge: 2” NPT Max. Head: 24FT Water Temperature: 0-40℃/32-104℉ Voltage/Frequency: 120V/60HZ Waterproof: IPX8 Current Rating: 8A Max. Flow Rate: 5220GPH

Electric Anode Rod for Hot Water Heater, Eliminates Odor and Stops Corrosion

Transform your hot water experience with our Electric Anode Rod, a luxurious solution designed to eliminate unpleasant odors and protect your water heater from corrosion. Crafted from titanium, our anode rod outperforms traditional magnesium and aluminum options, ensuring long-lasting protection for your water heater.

2.8 Gallon RO Water Storage Tank for Reverse Osmosis System NSF Certificated

NSF certificated NSF certificated 2.8 gallon plastic tank. Inlet and Outlet Top : Stainless steel 1/4″ NPT1/4″ thread for tank ball valve. Bottom : check / charge / release pressure point. Dimension Smart size ,special for little cabinet. Store less pure water, ensure you drink pure water. Specification: Shelf life: 3 Years. Service life :5 Years min. Pre-charge pressure (empty tank) :5-7 psi. More valuable information: Question : Where can we use this tank? Answer : It is special used as storage tank for Reverse Osmosis System. Question : What is dimension of 2.8 Gallon tank? Answer :please leave space 9.6″x9.6″x14.6″ for the tank. Question : What is in the box? Answer :Just 1 x 2.8 gallon tank in the box,you should buy tank ball valve separated. Question : Where can I buy tank ball valve? Answer :Please search product in our store or contact the seller. It is for 3/8″ tube . Question : BPA free? Answer :Yes, BPA free. Note: 1.It Is Recommended to Wait Until the Entire System Is Pressurized and Re-Check for Any Leaks Before Leaving Installation Site. 2.The First 2 Tanks of Water Produced Should Not Be Used

2.8 Gallon RO Water Storage Tank for Reverse Osmosis System NSF Certificated

NSF certificated NSF certificated 2.8 gallon plastic tank. Inlet and Outlet Top : Stainless steel 1/4″ NPT1/4″ thread for tank ball valve. Bottom : check / charge / release pressure point. Dimension Smart size ,special for little cabinet. Store less pure water, ensure you drink pure water. Specification: Shelf life: 3 Years. Service life :5 Years min. Pre-charge pressure (empty tank) :5-7 psi. More valuable information: Question : Where can we use this tank? Answer : It is special used as storage tank for Reverse Osmosis System. Question : What is dimension of 2.8 Gallon tank? Answer :please leave space 9.6″x9.6″x14.6″ for the tank. Question : What is in the box? Answer :Just 1 x 2.8 gallon tank in the box,you should buy tank ball valve separated. Question : Where can I buy tank ball valve? Answer :Please search product in our store or contact the seller. It is for 3/8″ tube . Question : BPA free? Answer :Yes, BPA free. Note: 1.It Is Recommended to Wait Until the Entire System Is Pressurized and Re-Check for Any Leaks Before Leaving Installation Site. 2.The First 2 Tanks of Water Produced Should Not Be Used