Ultra Custom Pools

Item Tag: 91-100 A

Wadsworth A2100 – 100A 2 Pole 240V TYPE A Circuit Breaker

The Wadsworth A2100 is a 100A, 2 Pole circuit breaker with a maximum amperage of 100A. It is designed for AC current type with a voltage range of 120/240V. This Type A circuit breaker features an on/off operation method and includes a trip indicator for easy identification of potential issues. Made of ABS/plastic material, this electrical component is ideal for residential use in home improvement projects related to electrical panels, boxes, and circuit breakers.

100A MPPT Solar Panel Battery Regulator Charge Controller Auto 12V 24V 36V 48V

LCD Liquid Crystal Display: Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display. 7 Operation Modes：Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use. 4 kinds of voltages automatic identification：It will automatic identify DC12V/24V, DC36V, DC48V by itself.

Dual USB 100A MPPT Solar Charge Controller 12V 24V 36V 48V PV Battery Regulator

Dual USB 100A MPPT Solar Charge Controller 12V 24V 36V 48V PV Battery Regulator 100% brand new and high-quality made.Multiple LCD display features, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display.Equipped with 7 operation modes: charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use.The controller uses large-section and spacing wiring ports, it can be installed with 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses.Adopts dual USB charging port design, it can be used to charge 2 devices at the same time and supports most USB port devices.4 kinds of voltages automatic identification, it will automatic identify DC12V/24V, DC36V, DC48V by itself.Charging Voltage Setting Instruction:After connecting the battery, after setting the clock and saving, long press “▲” for 3-5 seconds, the screen displays L**V as the floating charge voltage, which can be adjusted by pressing “▼”; short press again “▲”H**V is to increase the charging voltage, which can be adjusted by pressing “▼”; shortly press “▲” again. F**V is the low-voltage cut-off voltage of the DC load, which can be adjusted by pressing “▼”; after setting Long press “▲” for 3-5 seconds to save and exit.Specifications:Type: Solar Charge ControllerMaximum Charging Current: 100AMaximum Input Voltage of Photovoltaic Panels: 15V-23V(12V),  30V-45V(24V),  45V-69V(36V),  60V-90V(48V)Maximum Input Power of Photovoltaic Panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USBSupport Battery: Lithium Battery & Lead Acid BatteryWorking Temperature: -25℃~55℃Cooling Method: Heat Sink Self-coolingCharging Method: Focused MPPT Modulation ChargingWorking Mode: 7Protective Function: prevent overcharge, overvoltage/DC output low voltage, high voltage protective, reverse polarity protective, etc.Package Includes:1x Solar Charge Controller1x User Manual Shipping Policy Returns Contact Us All orders will be processed and shipped within 12 hours, Monday to Friday in most cases.Most packages will be shipped via USPS First Mail, it usually takes 3-5 days for delivery.A tracking number will be emailed to you upon shipment. Please note that USPS does not update tracking information location by location.We only ship to address that you input during Paypal checkout. Buyers are responsible for wrong or undeliverable address. Returns will be accepted within 30 days after delivery. However, if the item is damaged upon arrival, buyers must contact us within 3 days after delivery for any refund or replacement.Returns will not be accepted if buyers caused any damages to the item.Refunds are given as Exchange or Money Back. Please be patient when contacting us, all messages will be replied within 12 hours.Please let us know immediately if a package is damaged upon arrival.Feel free to contact us if you’d like to combine shipping on your purchases.We appreciate your feedback and we will send buyers positive feedback after a shipment has been processed.Customer satisfaction is significant to us. If you are dissatisfied with a transaction for any reason. Before taking any action, please contact us through eBay and we will do everything we can to help you. Listing and template services provided by inkFrog

Litime 12V 100Ah LiFePO4 Lithium Battery 100A BMS for RV Off-grid Trolling Motor

 If you’re searching for a deep cycle battery for RV, camper, caravan, golf cart, cabin, or marine use, Off-Grid Applications, then this LiTime lithium-ion batter Built in BMS: Battery Management System protects it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. Without memory effect, no matter what state the battery is, it can be used as soon as it is charged. Ultra-Light Weight: about 24.25 lbs, only 1/3 weight of normal lead-acid battery; This makes li-iron batteries perfect for solar home, RV, campers, motor homes, Marine and Off-Grid Applications ect. 【Grade A Lithium Battery & 10 Years Lifetime】 Litime lithium iron batteries have exceptional quality since they are manufactured by Automotive Grade LiFePO4 Cells with higher energy density, more stable performance & greater power. Highest-level safety based on UL Test Reports for the cells inside the battery. It provides 4000+ cycles @100% DOD (6000 Cycles @80% DOD, 15000 Cycles @60% DOD) & a 10-year lifetime compared to 200~500 cycles & a 3-year lifetime in SLA/AGM battery. 【100% Top Protection】 Litime LiFePO4 battery has built-in 100A BMS to protect it from overcharging, over-discharging, over-current, overheating and short circuits with excellent self-discharge rate, ensuring the LiFePO4 battery’s safety level and optimize the 12V battery performance. Our battery is IP65 waterproof, setting you free from worrying to install indoors or outdoors. 【Capacity Expansion & Wide Applications】 Litime 12V 100Ah battery supports up to 4 in series and 4 in parallel (Max 4S4P) to get more capacity (200Ah, 300Ah, 400Ah) and higher voltage (24V, 36V, Max.48V). Max connected in 16 batteries to build a 48V 400Ah battery system, with 20.48kWh energy, max. 20.48kW load power. Various combinations make it perfect for RV, solar, home storage, and off-grid application. Make a bold trial of your first DIY battery system. 【1/5*Lightweight & More Flexible Applications】 One Litime 12V 100Ah LiFePO4 battery has a lightweight of 24.25lbs, only 1/5 of a 12V 200Ah lead acid battery (about 130lbs), but equivalent in energy, faster to be fully charged, which makes it easier to carry and more convenient to use. This product is your best choice for outdoor camping power and indoor easy installation. No more worries about overweight and limited capacity. 【Fast Delivery & Outstanding Service】 We are committed to providing you with satisfactory service. Fast delivery because the battery will be shipped from our local warehouses in Los Angeles, California, or Dallas, Texas. Professional technical support, humanized return policy & customer service as we provide easy-to-understand operation manuals & online services with a quick response within 24hrs. If you have any questions, please feel free to contact us and we will do our best to support you. CHARGECharge Method: CC/CVCharge Voltage: 14.4V±0.2VRecommend Charge Current: 20A (0.2C) BATTERYCell: Prismatic LiFePO4 BatteryNominal/Usable Capability: 100AhNominal Voltage: 12.8VEnergy: 1280WhCycle Life: ≥4000 times BMSBMS Boar: 100AMax. Continuous Charge/Discharge Current: 100AMax. Discharge Current 5 Seconds: 280AMax. Continuous Load Power: 1280WInternal Impedance: ≤40mΩ Packing List 12V 100Ah LiFePO4 Battery Pack *1 Terminal Screws *2 Pairs Warranty Card *1 Product Manual *1 Please be noted: battery charger is not included. On May 5, 2023 at 01:15:37 PDT, seller added the following information:

4000W 100A MPPT Solar Charge Controller USB 12V 24V 36V 48V PV Battery Regulator

4000W 100A MPPT Solar Charge Controller USB 12V 24V 36V 48V PV Battery Regulator Features:Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display.Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use.It will automatic identify DC12V/24V, DC36V, DC48V by itself.Use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses.The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc.The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃.Equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protective and reverse polarity protective, etc. Clock setting instructions:When the battery is connected, press “▲” “▼” to set the clock table, short press “■” to save.Charging voltage setting instructions:After connecting the battery, after setting the clock and saving, long press “▲” for 3-5 seconds, the screen displays L**V as the floating charge voltage, which can be adjusted by pressing “▼”; short press again “▲”H**V is to increase the charging voltage, which can be adjusted by pressing “▼”; shortly press “▲” again. F**V is the low-voltage cut-off voltage of the DC load, which can be adjusted by pressing “▼”; after setting Long press “▲” for 3-5 seconds to save and exit.Specification:Type: Solar Charge ControllerMaximum charging current: 100AMaximum input voltage of photovoltaic panels: 15V-23V(12V),  30V-45V(24V),  45V-69V(36V),  60V-90V(48V)Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USBSupport Battery: Lithium Battery & Lead Acid BatteryWorking temperature: -25℃~55℃Cooling method: heat sink self-coolingCharging method: Focused MPPT modulation chargingWorking mode: sevenProtective function: prevent overcharge, overvoltage/DC output low voltage, high voltage protective, reverse polarity protective, etc.Package Includes:1× Solar Charge Controller1× Manual Listing and template services provided by inkFrog