Ultra Custom Pools

Item Tag: AC Infinity

CLOUDWAY T10, Whole House Fan System, Temperature Humidity Controller, 1200 CFM

AC Infinity – CLOUDWAY Series CLOUDWAY T10, Whole House Fan System, Temperature Humidity Controller, 1200 CFM A whole house attic fan designed to cool and ventilate entire homes by exhausting hot air from indoor spaces. Smart digital controller with temperature humidity trigger programming, fan speed control, timers, and alarms. Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than most others. Features 2-door shutters with damper that blocks attic air from entering living spaces when fan is not in use. Duct Size: 10” | Dimensions: 9.8 x 15.1 x 11.3 in. | Airflow: 1201 CFM | Noise: 48 dBA | Bearings: Dual Ball Product Description A whole house fan system designed to be installed in attics to keep homes cool; it exhausts hot air from indoor spaces while creating passive intake to pull in fresh air. Each attic fan is controlled by an LCD digital controller, featuring a smart thermostat with triggers, fan speed control, and status alerts. The fan uses a PWM-controlled EC motor that allows it to run efficiently and quietly at a maximum of 48 dBA. This kit includes 4-layer ducting, stainless steel duct clamps and grille, and a 2-door shutter that blocks attic air from flowing into your home when the fan is not in use. Intelligent Controller Featuring active temperature and humidity monitoring, the digital controller has programmable triggers that activate the attic fan when your house gets too hot or humid. The fan can run continuously or on a timer to start and stop when you need it to. Set the whole house fan to custom speeds between 0 and 10 to optimize your desired cooling and noise level. Each smart controller includes a 12 ft. corded sensor probe that detects temperature and humidity in your home. Other features include LCD screen energy-saving mode, backup memory, and alert notifications. Efficient Performance The PWM (Pulse Width Modulation) controlled motor not only spins the fan quietly, but also consumes up to 95% less power than air conditioner units. The attic fan has a 50,000-hour continuous run lifespan, using dual ball bearings that allow omnidirectional mounting. It is also IP-44 rated to resist dust and moisture while performing in most humid environments. The insulated damper uses gravity-fed shutters that close the opening when the whole house fan is not in use, keeping attic air from entering your home. FRIENDLY SERVICE Contact us by email support (a) acinfinity.com or send us a message through ebay if you have any questions, and we’ll be happy to help. FAST SHIPPING We ship out all orders from California within 1 business day of payment. Orders are shipped with UPS or USPS, and include tracking info. FREE RETURNS If you’re not happy with your purchase for any reason, please contact us to receive a prepaid return label – Return shipping is absolutely FREE. Copyright © 2022 AC Infinity Inc. All rights reserved.

CLOUDWAY T12, Whole House Fan System, WiFi-Integrated Controls, 1600 CFM

AC Infinity – CLOUDWAY Series CLOUDWAY T12, Whole House Fan System, WiFi-Integrated Controls, 1600 CFM A whole house attic fan designed to cool and ventilate entire homes by exhausting hot air from indoor spaces. Dynamic temperature, humidity & VPD programming, with timers, cycles, scheduling, and minimum speed. Remotely connect to our WiFi app to access advance programs, view climate data, and set automation. Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than most others. Duct Size: 12” | Dimensions: 12.3 x 17.7 x 14.1 in. | Airflow: 1604 CFM | Noise: 62 dBA | Bearings: Dual Ball Product Description A whole house fan system designed to be installed in attics to keep homes cool; it exhausts hot air from indoor spaces while creating passive intake to pull in fresh air. Each attic fan is controlled by a WiFi-enabled digital controller, featuring a smart thermostat with triggers, fan speed control, status alerts, and more. The fan uses a PWM-controlled EC motor that allows it to run efficiently and quietly at a maximum of 62 dBA. This kit includes 4-layer ducting, stainless steel duct clamps and grille, and a 2-door shutter that blocks attic air from flowing into your home when the fan is not in use. Intelligent Controller CONTROLLER 69 PRO features smart programming like temperature and humidity triggers that activate whenever your house gets too hot or humid. Maintain a consistently cooler climate by setting a minimum fan speed that will run continuously and only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for even greater control. Securely connect to the AC Infinity app via WiFi to utilize automation capabilities from anywhere throughout the day. Access your fan remotely, unlock advance programs, set notifications, view historical climate charts, and export CSV data. Efficient Performance The PWM (Pulse Width Modulation) controlled motor not only spins the fan quietly, but also consumes up to 95% less power than air conditioner units. The attic fan has a 50,000-hour continuous run lifespan, using dual ball bearings that allow omnidirectional mounting. It is also IP-44 rated to resist dust and moisture while performing in most humid environments. The insulated damper uses gravity-fed shutters that close the opening when the whole house fan is not in use, keeping attic air from entering your home. FRIENDLY SERVICE Contact us by email support (a) acinfinity.com or send us a message through ebay if you have any questions, and we’ll be happy to help. FAST SHIPPING We ship out all orders from California within 1 business day of payment. Orders are shipped with UPS or USPS, and include tracking info. FREE RETURNS If you’re not happy with your purchase for any reason, please contact us to receive a prepaid return label – Return shipping is absolutely FREE. Copyright © 2022 AC Infinity Inc. All rights reserved.

CLOUDWAY S12, Whole House Fan System, Remote 10-Speed Fan Controller, 1600 CFM

AC Infinity – CLOUDWAY Series CLOUDWAY S12, Whole House Fan System, Remote 10-Speed Fan Controller, 1600 CFM A whole house attic fan designed to cool and ventilate homes by exhausting hot air from indoor spaces. 10-speed wireless controller with backup memory remotely adjusts fan speed and optimizes airflow. Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than others. Features 2-door shutters with damper that blocks attic air from entering living spaces when fan is not in use. Duct Size: 12” | Dimensions: 12.3 x 17.7 x 14.1 in. | Airflow: 1604 CFM | Noise: 62 dBA | Bearings: Dual Ball Product Description A whole house fan system designed to be installed in attics to keep homes cool; it exhausts hot air from indoor spaces while creating passive intake to pull in fresh air. Each attic fan is controlled by a wireless fan remote that can adjust the fan speed in up to 10 levels. This will enable you to conveniently optimize your desired cooling and noise levels from anywhere in your home. The fan uses a PWM-controlled EC motor that allows it to run efficiently and quietly. This kit includes 4-layer ducting, stainless steel duct clamps and grille, and a 2-door shutter that blocks attic air from flowing into your home when the fan is not in use. Next-Gen EC Motor Features a cutting-edge Electronically Commutated (EC) motor that is digitally controlled using precise electronic pulses. This PWM technology enables the fan to operate quieter and control the full range of its speed 0 to 100% without generating great volumes of heat or noise. EC motors pay for themselves in the long run having twice the lifespan and being 40% more energy-efficient than AC motors. Efficient Performance This attic fan has a 50,000-hour continuous run lifespan, using dual ball bearings that allow omnidirectional mounting. It is also IP-44 rated to resist dust and moisture while performing in most humid environments. The insulated damper uses gravity-fed shutters that close the opening when the whole house fan is not in use. This keeps attic air from entering your home. FRIENDLY SERVICE Contact us by email support (a) acinfinity.com or send us a message through ebay if you have any questions, and we’ll be happy to help. FAST SHIPPING We ship out all orders from California within 1 business day of payment. Orders are shipped with UPS or USPS, and include tracking info. FREE RETURNS If you’re not happy with your purchase for any reason, please contact us to receive a prepaid return label – Return shipping is absolutely FREE. Copyright © 2022 AC Infinity Inc. All rights reserved.

AIRLIFT T20 Shutter Exhaust Wall Mount-Fan 20″ Attic, Shed, Workshop, Greenhouse

AIRLIFTSERIES AIRLIFT T16 Shutter Exhaust Wall Mount-Fan 16″ for Attic, Shed, Workshop, Greenhouse Large high-airflow shutter fan designed to remove stale air and ventilate greenhouses, garages, and more. Dynamic temp, humidity, and VPD programming with custom timers and support for up to 4 fans. Connect your mobile device to our app via WiFi to automate and track your building climate from anywhere. IP44-rated frame features steel shutters and fan blades that block debris while resisting moisture and dust. Fan Size: 20” | Dimensions: 23.0 x 23.0 x 11.2 in. | Airflow: 3425 CFM | Noise: 65 dBA | Bearings: Dual Ball Product Description A shutter exhaust fan designed to exchange air in large spaces, improving ventilation in workspaces like warehouses, greenhouses, garages, and workshops. By installing this exhaust fan, you can refresh your workspace and regulate heat, moisture, and odor levels to improve comfort. It is run by a PWM-controlled EC motor that is energy-efficient while enabling precise fan speed control to generate your ideal ventilation level. This fan features an advance UIS controller that not only supports the fan speed control but also dynamic climate and time-based programming. Its heavy-duty build features aluminum fan blades, steel wire guards, and lightweight steel shutters. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. Intelligent Programming Connect up to four devices to provide each with shared or independent programming. Go beyond basic on/off triggering by setting dynamic programs that adjust fan speed and light intensity in response to changing temperature, humidity, and VPD. Set minimum baseline levels that your devices will constantly run at, only increasing when triggers are activated. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect with the AC Infinity app via Bluetooth or WiFi to remotely access your devices, unlock advance programs, set alarms, notifications, view historical charts, and export CSV data. Heavy-Duty Performance Features steel shutters that are weather and corrosion-resistant, automatically closing when not in use to prevent dust, debris, and moisture from entering your space. The blades and impeller are constructed of lightweight aluminum, weight-balanced to reduce vibrations. Utilizing an innovative EC motor that is controlled electronically using PWM (Pulse Width Modulation), the fans can maximize airflow while reducing noise and power consumption. The fully enclosed motor is also permanently lubricated and houses dual-ball bearings that are rated at 67,000 hours. The unit is IP-44 rated to be highly resistant to dust and liquids and performs well even in harsh environments. FRIENDLY SERVICE Contact us by email support (a) acinfinity.com or send us a message through ebay if you have any questions, and we’ll be happy to help. FAST SHIPPING We ship out all orders from California within 1 business day of payment. Orders are shipped with UPS or USPS, and include tracking info. FREE RETURNS If you’re not happy with your purchase for any reason, please contact us to receive a prepaid return label – Return shipping is absolutely FREE. Copyright © 2023 AC Infinity Inc. All rights reserved.

CLOUDLINE A8, Inline Duct Fan 8” Cooling Ventilation Exhaust Grow Tents

CLOUDLINE SERIES – A8 AC Infinity CLOUDLINE A8, Quiet Inline Duct Fan 8” with Inline Speed Controller Designed to quietly ventilate grow tents, exhaust odors, transfer heating/cooling to rooms, and cool AV closets. Features the same build quality and innovations as the CLOUDLINE Series delivered in a value package. Includes a wired 10-speed fan controller; also compatible with all CLOUDLINE Series smart controllers. Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance. Duct Size: 8″ | Dimensions: 12.2 x 10 x 9.4 in. | Airflow: 724 CFM | Noise: 42 dBA | Bearings: Dual Ball Product Description This inline fan system packs the CLOUDLINE’s core innovations and premium build quality together to bring you a value package. Designed to quietly cool grow tents, rooms, and closets, and provide ventilation in various air circulation and exhaust projects. Containing an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one inline fan unit, one speed controller, UIS to 4-pin Molex dongle, installation manual, and all necessary mounting hardware. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment. Precise Speed Controller The speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. This inline fan is equipped with the CLOUDLINE Series’ same EC-motor that is precisely controlled using PWM (Pulse Width Modulation), which enables it to run smoothly at extremely low RPM speeds without generating motor noise. Ten speed options are available with power switch and backup memory. This model can be connected to the following smart controllers to share the same programming and power source as other EC-motor CLOUDLINE fans: B-Series temperature controller, T-Series temperature and humidity controller, CONTROLLER 69 and CONTROLLER 67. Quiet and Energy Efficient Design The inline fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. In addition, the inline fan is crafted with a plastic mounting base to diminish noise as a result of fan vibration. The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments. Applications This quiet inline fan system is most found in hydroponic grow tents and rooms to provide cooling and ventilation for plants. Its low noise and advanced control features make it fit for bathroom and attic settings, as well as cooling AV equipment rooms, closets, racks, and cabinets. FRIENDLY SERVICE Contact us by email support (a) acinfinity.com or send us a message through ebay if you have any questions, and we’ll be happy to help. FAST SHIPPING We ship out all orders from California within 1 business day of payment. Orders are shipped with UPS or USPS, and include tracking info. FREE RETURNS If you’re not happy with your purchase for any reason, please contact us to receive a prepaid return label – Return shipping is absolutely FREE. Copyright © 2021 AC Infinity Inc. All rights reserved.

AIRTAP T4, Quiet Register Booster Fan, Heating / Cooling 4 x 12” Register Bronze

AIRTAP SERIES AIRTAP T4, Quiet Register Booster Fan System, Bronze Vent, Fits 4 x 12” Registers A quiet fan system designed for improving wall and floor register airflow from HVAC systems. Programmable LCD controller with heating and cooling thermostat, and automated fan speeds. Premium anodized aluminum frame with CNC-machined detailing and a brown bronze finish. Features stator-blade fans which can deliver strong airflow from high static-pressure ductwork. Fits ONLY 4 x 12 in. Registers | Airflow: 120 CFM | Noise: 18 Dba | Includes Wall Adapter Product Description A quiet fan system designed to be mounted onto wall or floor registers to boost airflow. By increasing warm and cool air coming from weak registers, you can increase room comfort and reduce energy costs. Features a LCD display with smart thermostat control and customizable fan speeds. The mounting frame is constructed of bronze-anodized aluminum with CNC-machined detailing and a brushed finish for a professional appearance. Features PWM-controlled stator blade fans that are designed for high static pressure applications such as ducting. Includes hardware and power supply needed to secure the unit onto an existing register opening and power it through an outlet. Intelligent Programming The controller on each unit features active thermal monitoring that can trigger fans to run for both cooling and heating temperatures you have set. The controller can also be set to run continuously at speeds manually. Features temperature display, easy power on-off, and backup memory. Stator-Blade PWM Fans The system utilizes high-performance DC-motors that are controlled using PWM (Pulse Width Modulation). This technology enables the dual 92mm fans to be able to run smoothly at extremely low RPM speeds without generating motor or electromagnetic noises. In addition, the fans feature a stator-blade design with a high static pressure rating, specialized for delivering airflow even in applications where air movement is being restricted such as through ductwork. The motor houses dual ball bearings that are rated at 67,000 hours and allow the fan system to be mounted horizontally or vertically, which are certified by CE and RoHS. FRIENDLY SERVICE Contact us by email support (a) acinfinity.com or send us a message through ebay if you have any questions, and we’ll be happy to help. FAST SHIPPING We ship out all orders from California within 1 business day of payment. Orders are shipped with UPS or USPS, and include tracking info. FREE RETURNS If you’re not happy with your purchase for any reason, please contact us to receive a prepaid return label – Return shipping is absolutely FREE. Copyright © 2017 AC Infinity Inc. All rights reserved.