Ultra Custom Pools

Item Tag: Bayoung

10KW On Grid Wind Turbine Inverter 220V 380V 50Hz Power Grid-Tie MPPT w/ RS485

This grid tie inverter is for wind turbine power generation. The inverter input is 3 phase AC, not DC. The inverter output is for 220V single phase grid OR 380V 50Hz/60Hz Three phase grid . Before placing the order, please provide the seller the data of the generator (rated power, rated RPM, rated voltage, magnet pairs), thanks. System Composition The system mainly includes: wind turbine, lightning protector 1 in wind turbine side, electromagnetic brake system, AC filter in wind turbine side, rectifier boost voltage, dump load circuit, inverting bridge, AC filter in inverter side, common mode filter, AC breakers, lightning protector 2 in grid side, and single-phase 230V grid. Hardware Function Introduction Lightning protector: the lightning protection device at the input and output side of the machine. Electromagnetic brake: the machine can start electromagnetic brake to brake the wind turbine when rotational speed is over, inverter output power is over, the temperature is over. AC filter: The ripple and DC components in AC voltage are filtered out, and the AC voltage is transformed into a smooth, harmonic waveform which satisfying the requirements. Rectifier boost circuit: Transform and boost the three-phase AC voltage generated by wind turbine to required DC voltage. Dump load circuit: Redundant power is released by dump load by PWM control. Inverting bridge: transform DC to AC Common mode filter: suppress EMI interference in the circuit. AC breakers: Cut off the connection between grid and inverting bridge during inverter fault or standby to avoid rectification flow backward Features Wind power Controller&Inverter integrated machine Support wide range voltage input MPPT included, and track point settable Complete protection functions. Model WWGI100 Wind Turbine Input Rated input power 10kW Max. input power 11kW Rated input voltage 220Vac Manual brake Keep pressing the button for 5s to unload completely, and then recover by pressing it for another 5s. Switch “ON” the brake switch Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed（optional） 500r/min（factory default，0~1000r/min settable） Unload completely when reached the set rotational speed, and recover automatically after 10mins. AC Output Grid Type Single-phase Rated output power 10kW Rated Grid voltage 220Vac Grid voltage range 200~260Vac Rated Grid frequency 50Hz Work frequency range 49Hz~51Hz Rated output current 22.7A Thdi ＜5% (at rated power) Protection Functions AC output overvoltage/ undervoltage protection YES AC output over frequency /underfrequency protection YES AC short circuit protection YES Surge protection YES Anti-islanding protection YES Over-temperature protection YES Lightning protection YES General Parameters Display mode LED Display information dump load, grid state, wind generator state, faults Monitoring contents wind rotate speed, wind power, AC output voltage /current/power, and fault code Efficiency ＞93% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Noise ≤65dB Cooling mode Forced air cooling Cover protection class IP54 Product dimension (W*H*D) 370×545×185mm Product net weight 19kg Dump load dimension(W*H*D) 390×730×190mm Dump load net weight 19kg Note: Part of parameters can be adjusted according to customer’s specific demand. Model WWGIT100 Wind Turbine Input Rated input power 10kW Max. input power 11kW Rated input voltage 380Vac Manual brake Keep pressing the button for 5s to unload completely, and then recover by pressing it for another 5s. Switch “ON” the brake switch Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed（optional） 500r/min（factory default，0~1000r/min settable） Unload completely when reached the set rotational speed, and recover automatically after 10mins. AC Output Grid Type Three-phase Rated output power 10kW Rated Grid voltage 380Vac Grid voltage range 320~420Vac Rated Grid frequency 50Hz Work frequency range 49Hz~51Hz Rated output current 8A Thdi ＜5% (at rated power) Protection Functions AC output overvoltage/ undervoltage protection YES AC output over frequency /underfrequency protection YES AC short circuit protection YES Surge protection YES Anti-islanding protection YES Over-temperature protection YES Lightning protection YES General Parameters Display mode LED Display information dump load, grid state, wind generator state, faults Monitoring contents wind rotate speed, wind power, AC output voltage /current/power, and fault code Efficiency ＞93% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Noise ≤65dB Cooling mode Forced air cooling Cover protection class IP54 Product dimension (W*H*D) 370×545×185mm Product net weight 19kg Dump load dimension(W*H*D) 390×730×190mm Dump load net weight 19kg Note: Part of parameters can be adjusted according to customer’s specific demand. Please connect those parts according to the order of ①②③④, and notice the following items. Connect two output lines of dump load to the unload terminals “R” “R” of the machine. Connect “L” “N” and earth wire of grid to the terminals “L” “N” and “” on the machine relatively. When wind turbine is still or running in a low speed, connects its output line to the “WIND INPUT” terminal on the machine. Connect communication device to the relative communication port if there is a communication device. Check all the connection to make sure they are connected rightly and tightly. Note： Please measure the voltage and frequency of the grid before connect the system to the grid. AC “L” “N” cannot be connected to the earth wire terminal, or the machine will be damaged permanently. The switch should be at “BRAKE” status while installation, and changed to “RUN” status when it works. Fault code Analysis Possible solutions 1 Grid is not normally connected. Grid voltage or frequency is abnormal Check the details from the monitoring software. 2 Inverting circuit soft over current protection Check the wiring connection on the AC side circuit after ensuring the machine is disconnected with any power supply. 3 Bus overvoltage protection Please connect Win Power 4 over temperature protection once the inverting module temperature recovers to normal, the machine will clear the fault itself. 5 IPM protection for the inverting side Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. 6 Rectifying circuit soft over current protection Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. 7 IPM protection for rectifying side Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. 8 Wind voltage is higher than bus voltage fault protection point. Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power.

10000W On Grid Wind Turbine Inverter 220V 380V 50Hz Power Grid-Tie MPPT w/ RS485

This grid tie inverter is for wind turbine power generation. The inverter input is 3 phase AC, not DC. The inverter output is for 220V single phase grid OR 380V 50Hz/60Hz Three phase grid . Before placing the order, please provide the seller the data of the generator (rated power, rated RPM, rated voltage, magnet pairs), thanks. System Composition The system mainly includes: wind turbine, lightning protector 1 in wind turbine side, electromagnetic brake system, AC filter in wind turbine side, rectifier boost voltage, dump load circuit, inverting bridge, AC filter in inverter side, common mode filter, AC breakers, lightning protector 2 in grid side, and single-phase 230V grid. Hardware Function Introduction Lightning protector: the lightning protection device at the input and output side of the machine. Electromagnetic brake: the machine can start electromagnetic brake to brake the wind turbine when rotational speed is over, inverter output power is over, the temperature is over. AC filter: The ripple and DC components in AC voltage are filtered out, and the AC voltage is transformed into a smooth, harmonic waveform which satisfying the requirements. Rectifier boost circuit: Transform and boost the three-phase AC voltage generated by wind turbine to required DC voltage. Dump load circuit: Redundant power is released by dump load by PWM control. Inverting bridge: transform DC to AC Common mode filter: suppress EMI interference in the circuit. AC breakers: Cut off the connection between grid and inverting bridge during inverter fault or standby to avoid rectification flow backward Features Wind power Controller&Inverter integrated machine Support wide range voltage input MPPT included, and track point settable Complete protection functions. Model WWGI100 Wind Turbine Input Rated input power 10kW Max. input power 11kW Rated input voltage 220Vac Manual brake Keep pressing the button for 5s to unload completely, and then recover by pressing it for another 5s. Switch “ON” the brake switch Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed（optional） 500r/min（factory default，0~1000r/min settable） Unload completely when reached the set rotational speed, and recover automatically after 10mins. AC Output Grid Type Single-phase Rated output power 10kW Rated Grid voltage 220Vac Grid voltage range 200~260Vac Rated Grid frequency 50Hz Work frequency range 49Hz~51Hz Rated output current 22.7A Thdi ＜5% (at rated power) Protection Functions AC output overvoltage/ undervoltage protection YES AC output over frequency /underfrequency protection YES AC short circuit protection YES Surge protection YES Anti-islanding protection YES Over-temperature protection YES Lightning protection YES General Parameters Display mode LED Display information dump load, grid state, wind generator state, faults Monitoring contents wind rotate speed, wind power, AC output voltage /current/power, and fault code Efficiency ＞93% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Noise ≤65dB Cooling mode Forced air cooling Cover protection class IP54 Product dimension (W*H*D) 370×545×185mm Product net weight 19kg Dump load dimension(W*H*D) 390×730×190mm Dump load net weight 19kg Note: Part of parameters can be adjusted according to customer’s specific demand. Model WWGIT100 Wind Turbine Input Rated input power 10kW Max. input power 11kW Rated input voltage 380Vac Manual brake Keep pressing the button for 5s to unload completely, and then recover by pressing it for another 5s. Switch “ON” the brake switch Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed（optional） 500r/min（factory default，0~1000r/min settable） Unload completely when reached the set rotational speed, and recover automatically after 10mins. AC Output Grid Type Three-phase Rated output power 10kW Rated Grid voltage 380Vac Grid voltage range 320~420Vac Rated Grid frequency 50Hz Work frequency range 49Hz~51Hz Rated output current 8A Thdi ＜5% (at rated power) Protection Functions AC output overvoltage/ undervoltage protection YES AC output over frequency /underfrequency protection YES AC short circuit protection YES Surge protection YES Anti-islanding protection YES Over-temperature protection YES Lightning protection YES General Parameters Display mode LED Display information dump load, grid state, wind generator state, faults Monitoring contents wind rotate speed, wind power, AC output voltage /current/power, and fault code Efficiency ＞93% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Noise ≤65dB Cooling mode Forced air cooling Cover protection class IP54 Product dimension (W*H*D) 370×545×185mm Product net weight 19kg Dump load dimension(W*H*D) 390×730×190mm Dump load net weight 19kg Note: Part of parameters can be adjusted according to customer’s specific demand. Please connect those parts according to the order of ①②③④, and notice the following items. Connect two output lines of dump load to the unload terminals “R” “R” of the machine. Connect “L” “N” and earth wire of grid to the terminals “L” “N” and “” on the machine relatively. When wind turbine is still or running in a low speed, connects its output line to the “WIND INPUT” terminal on the machine. Connect communication device to the relative communication port if there is a communication device. Check all the connection to make sure they are connected rightly and tightly. Note： Please measure the voltage and frequency of the grid before connect the system to the grid. AC “L” “N” cannot be connected to the earth wire terminal, or the machine will be damaged permanently. The switch should be at “BRAKE” status while installation, and changed to “RUN” status when it works. Fault code Analysis Possible solutions 1 Grid is not normally connected. Grid voltage or frequency is abnormal Check the details from the monitoring software. 2 Inverting circuit soft over current protection Check the wiring connection on the AC side circuit after ensuring the machine is disconnected with any power supply. 3 Bus overvoltage protection Please connect Win Power 4 over temperature protection once the inverting module temperature recovers to normal, the machine will clear the fault itself. 5 IPM protection for the inverting side Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. 6 Rectifying circuit soft over current protection Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. 7 IPM protection for rectifying side Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. 8 Wind voltage is higher than bus voltage fault protection point. Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power.

10A/20/30A PWM Solar Charge Controller 12V 24V Auto Dual USB Solar Panel Charger

PWM 10A/20/30A Solar Charge Controller 12V/24V Auto Dual USB Solar Panel Charger PWM 10A/20/30A Solar Charge Controller 12V/24V Dual USB Solar Charger 10A 20A 30A PWM Solar Charge Controller Solar Panel Battery Charger Regulator 12V 24V Auto Working LCD Display, Dual USB 5V Output Suitable for lead acid batteries: OPEN, AGM, GEL Intelligent solar controller: The product can automatically manage the working of solar panel and battery in solar system. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically (LCD will be unavailable at the same time). Features: Solar Controller Battery Voltage: 12V/24V auto; Rated Charge & Discharge Current: 10A/20A/30A; USB Output: 5V/2A max. Solar Charge Controller Build-in industrial micro controller. Adjustable charge/discharge control parameters, settable operating modes of loads, fully 4-stage PWM charge management. Solar Panel Charge Controller Multi-functional LCD display, dynamically display all the operating datas and working condition, can be conveniently switched working modes and parameter configuration. Solar Regulator Dual mosfet Reverse current protection, low heat production. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection, more safty for using, suitable for home, industrial, commercial etc. Solar System Controller Easy to install and operate, come with a detailed user manual in English. 12-months warranty and professional after-sale service within 24 hours. The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Parameters: Charge /Discharge current: 10A 20A 30A Batt voltage: DC 12V/24V Auto Max input Power：10A：120W (12v system), 240W (24v system) 20A：240W (12v system), 480W (24v system) 30A：360W (12v system), 720W (24v system) Solar Panel VOC Rang: 14V – 24V (12V battery), 28V<48V (24 battery) Two USB output: 5V/3A Load Mode: 24 hours, 1-23 hours, 0 hour Battery Option : 1. AGM = Sealed、Flooded / OPEN. 2. GEL Operating temperature: -35℃-60℃ Display: MENU : switch between different display,or to enter/exit setting by long press. UP : press to increase value. DOWN : presss to decrease value. PaymentDelivery detailsTerms of salesAbout usContact us Payment Payment 1.You can place an order and pay directly through eBay. After we receive your payment, we will prioritize your order. 2.Payment is required to get within 7 days after deal. If not, we will close the transaction. 3.If you have any problems after purchase, please contact us directly through eBay, and we will do our best to help you solve the problem. Delivery details Standard delivery time: We can bear all customs, we ship the goods via Sea shipping transportation channels and pay all customs in advance, so customs will release it directly when the package arrives in your country without charging you any fees, but the transit time will take 4-5 weeks or so. I hope you can be patient Accelerated service: If you need this product urgently, please contact us directly, we can speed up the transportation by air for you. However, you will have to pay additional accelerated fees, and when the package arrives in your country, there will be customs fees that you will have to pay yourself. Terms of sales 100% guarantees of quality and service If you are not completely satisfied with your product, please let us know within 30 days of receiving the product and you can also send us an email message. We will take care of the problem of return and exchange for you the first time. I'm sorry. I'm sorry. 1.Note: For your best shopping experience in our store and save time. Please do not click on "Return this item", except that you simply do not need it anymore. Since "Return Request" cannot help you solve the problem efficiently, it may take a little longer for you to get a response as we check every two days with our "Return Request". This is the fastest way to solve any problem for you (we may reply a day later if you contact us on Saturday). You will receive helpful and practical solutions through the communication between us. 2.If you need a return shipment, please double check if the item does not work, and contact our customer service representative, tell us the detailed problem and send us some pictures for confirmation. Then you will receive a unique address for the return. About us Welcome to our eBay shop. As a leading and emerging company in manufacturing and export business, Bayoung has specialized in business and industrial products, home and garden products for more than ten years.We believe that our vision and mission is to provide innovative products with best service and competitive price, Our goal is to make sure you find exactly what you are looking for and to make it easier for you to place your orders. Contact us Welcome to our shop! Your satisfaction is our top priority. Please do not hesitate to contact us if you have any questions about our products or services. Thank you very much! Our working hours (Monday to Friday): -09:00-12:00 (GMT+8) -14:00-18:00 (GMT+8) Saturday: -09:00-12:00 (GMT+8) -14:00-17:00 (GMT+8) All emails are answered very quickly during our working hours, emails are usually answered during the holiday within 24-hours. Welcome to contact us if you have any problem.