Ultra Custom Pools

Item Tag: Brackets

Large Scrollwork Design Mailbox Post Corbel Solid Cast Iron, 16 inch, B-85

Decorative cast iron shelf brackets corbels. (No shipping to Alaska, Hawaii or Puerto Rico). Fancy scrollwork design. These decorative shelf brackets can be used for a variety of projects – wall shelves, over the window shelving, open shelving, kitchen shelving, bathroom shelf, window corner accents, mailbox post accent, patio corbels. Our shelf brackets are very versatile and work for many projects.Our wall shelf brackets are available in volume pricing. Use the top pull-down menu to choose the quantity you need for your project. Feel free to contact us if you need a quantity larger than shown. Heavy duty solid cast iron. Each shelf bracket / corbel weighs about 4.8 pounds. You will need a solid stable surface to mount these to.Approximate size is 16 inch by 12 inch. The spine is 7/8 inch to 1 1/8 inch (plus the size at the widest point (ears/tabs). Sizes are approximate as these are hand-cast and may vary slightly. There are holes on each side for mounting. The holes will vary in placement as these are hand-cast.No hardware (screws) provided.This shelf bracket design has ears/tabs on the side to allow for easier mounting.The three-dimensional design is the same on both sides. You can use either way (long or short side).These shelf brackets have a baked-on powder finish that inhibits rust.Please let us know if this is a gift. We are more than happy to include a hand-written gift message on your behalf. We do not include any invoices or packing slips with the shipment.If for any reason the order is returned, all items must be returned to receive a refund.Our cast iron products are made in China, housed and shipped by Texans in USA

Weld on Tab Steel Angle 90° L Tab Brackets 1 1/2″ X 1 1/2″ X 3 1/2″ X 1/8″

Weld on Tab Steel Angle 90° L Tab Brackets 1 1/2″ X 1 1/2″ X 3 1/2″ X 1/8″ 1 1/2″ x 1 1/2″ x 3 1/2″ x 1/8″ Weld On Steel Angle Tab Brackets with a 3/8″ hole. The brackets are used for many applications when a weld-on bracket is needed so a steel post or rail can be anchored to a wall, column, wood post etc. Thickness of the material is 1/8″. Brackets come unpainted as seen in photos and have one 3/8″ pre-drilled hole for a screw or masonry anchor. Steel flat brackets Used for anchoring rails, posts, and any other type of metal. These brackets are great for anchoring metal fabrications, welding, metal art and metal frames. Material: The brackets are made of steel, which provides strength and durability. Steel is known for its ability to withstand heavy loads and resist bending or warping, making it suitable for various applications. Dimensions: The brackets have a size of 1 1/2″ x 1 1/2″ x 3 1/2″ x 1/8″, indicating the width, height, length, and thickness of the bracket. These dimensions provide stability and support, ensuring a strong connection when welded onto the desired surface. Weld-On Installation: The brackets are specifically designed to be welded onto surfaces. This method of attachment ensures a secure and permanent bond, capable of withstanding heavy loads and vibrations. Dimensions 1 1/2″ Width 3 1/2″ Length 1 1/2″ Height 3/8″ Hole 1/8″ Thickness Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via eBay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.

PostHugger™ Bent & Flat Knee Brackets For 6×6 Posts | 1/8″ Thick 45 Degree Angle

– – For 6×6 (5.5”x5.5”) Posts & Beams – – For 6×6 (5.5”x5.5”) Posts & Beams – – For 6×6 (5.5”x5.5”) Posts & Beams – – Build your own rugged and heavy duty PostHugger™ Pergola, Double Pergola, deck or other structure with our USA made Knee Brackets!! These Knee Brackets are constructed from 1/8″ thick steel — great for extra, heavy duty support for all your new DIY projects, and equally perfect for fixing/reinforcing the any build you already have! We offer two Knee Bracket Designs for your varying needs: Flat Knee™ – Our Flat Knee™ Bracket for 6×6 (5.5″x5.5″) posts is designed to sit flush against the outside of a knee joint in your build. Bent Knee™ – This knee brace bracket for 6×6 (5.5″x5.5″) posts is for use where you have a post coming in to meet another post at a 45° angle and want a bracket in the knee bend itself. These brackets are sold individually and are FOR USE WITH 6 x 6 POSTS (5.5” x 5.5”). If you want them for 4 x 4 (3.5″x3.5″) posts, copy & paste this link into your browser to purchase: https://www.ebay.com/itm/295577875822. (NOTE: All our brackets are based on the dimensional size of the lumber but we can make them actual 4″x4″ or 6″x6″ for you, if needed. Just let us know your ship-to zip code, the parts and actual size(s) you would like and we can let you know the total cost for custom brackets made to fit your saw-mill-cut posts.) These brackets are not flimsy/bendable metal. A single corner bracket weighs over 2 pounds – – strong enough to take what you throw at it (or what you throw it at!), but not so heavy where they are hard to work with. And all our PostHugger™ Brackets are Made in America with American-Made Steel! We are the original designer of the PostHugger™ brackets, which may be copied, but never equaled! 🙂 If you find a PostHugger™ knockoff, give us a chance to meet or beat their price. Please note that unless you choose the powder coated option, these ship as raw, unpainted steel. You can either paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time. ***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.*** Our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. If you use lag screws, we recommend 1/2″ x 2″ length. Bolts/lag screws are not included with our brackets. WOOD POSTS AND BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; you can pick them up at your local Home Depot/Menard’s/Lowe’s/Ace Hardware store. Our Other PostHugger™ Bracket offerings (sold separately) include: Outside Corners- Used on outside corners to join/attach two incoming horizontal posts on top of an upright/vertical post. The holes line up with Bent L’s if you want to use them on the inside. Bent L’s – Used as an inside corner, either alone or in conjunction with an Outside Corner to make a steel/post/steel sandwich for aesthetics and/or additional strength. The holes also line up with our Flat T’s. Flat T Brackets – Used to join/attach two incoming horizontal posts which are resting on top of an upright/vertical post. The holes line up with the Bent L’s in case you want to use them in making an inside corner on the opposite side of your Flat T. Double Inside Corners- The bottom part of this bracket attaches to the inside corner of an upright post, which then allows each ear on the top part of the bracket to go under horizontal posts coming in from the left and right sides. The holes are offset so that if used on the same post as an Outside Corner, they will not collide. Flat L’s – Used to join other parts of your design. Two Piece Post Base – Used to bolt a post to concrete or other suitable surface. If your post is going up against a wall or other flat surface which would interfere with having four feet, you will want to use either our Half-a-Post-Base, our 3-Sided Post Base (which has three feet) or our Full Post Base (which has just two feet) so that your post can be closer to a wall. Half a Post Base – This bracket is just one half of the Two Piece Post Base, for those who only need one (or another odd number). Three-Sided Post Base – Similar to our other Post Bases, but with three sides/feet. Full Post Base – Similar to our other Post Bases but with fours sides and just two feet (on opposite sides). Legless T™ – This bracket is the same dimensions & placement of bolt holes as the “T” – just without the bottom “leg” of the “T”! It measures 5.5″ x 16.5″ for a 6×6 post, and 3.5″ x 10.25″ for a 4×4 Post.

Flat X™ Bracket – 90 degree cross angle brackets to provide extra, heavy duty support to new or existing DIY builds & structures. Flat Knee™ – This knee brace bracket sits flush against the outside of a knee joint. Bent Knee™ – This knee brace bracket is for use where you have a post coming in to meet another post at a 45° angle and want a bracket in the knee bend itself. *****EXTRA SHIPPING COST ON ALL BRACKET ORDERS TO NON-CONTIGUOUS UNITED STATES.***** Please call 470-626-5989 to place your order. If you would like to see customer photos (and a video!) of some of our brackets in use, copy and paste the following URL into your browser: https://posthugger.com/photos/ © 2024 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

PostHugger™ 1000#CAP 4pc Set Roll & Lock Red Wheel Caster Brackets For 4X4 Posts

PostHugger™ 1000# Capacity per 4 pc Set All Rolling & Locking Wheels/Castors/Casters — FOR 4X4 (3.5″x3.5″) POSTS — Heavy Duty Shop Table, Garage Cart, or Grill — 1/8″ Thick Steel! Build your own rugged and heavy duty PostHugger™ ROLL AROUND shop/garage table with our USA made 1/8″ thick steel end brackets with welded on, locking/rolling wheel! Each wheel is rated at 300 pounds for an impressive 1,200 pounds of rolling around ability for the set of four! The wheels are an overall height of 4-1/4″, plus the 1/8″ thickness of the steel bracket we weld on. These wheels will not shear off like other castors when you roll around your heavy cart or hit a rock. Nope! They are 1/8” thick steel frames with welded-on locking castors! Our design means you do not bolt into the bottom of the post at all. Instead, you bolt through our bracket into the side of the post, for better strength! We use all locking castors so it is easy to find two to step on and lock. Because they are step-lock, when you need to unlock, just lift lever with top of shoe. A lot easier than the kind with a mid-wheel pivot lock where you have to use your hand. The wheel is 3″ and is mounted to a caster/ball bearing assembly having an overall height of 4-1/4”. We weld that assembly onto our bracket, which raises the height of the post by the 1/8″ thickness of the steel bracket, for a total distance from the ground to the bottom of the post of 4-3/8″. This listing is for a SET OF FOUR of the bad boys. Made for 4×4 Posts, there are two 1/2″ holes on each of the top ears for fastening to your 4×4 legs. (The holes for the tables legs are offset so that if you want to thru bolt, you don’t have to worry about hitting any of the other installed bolts!) Our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. WOOD POSTS AND BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; lifestyle photos depict build/use variations only. You can pick up the bolts and any washers needed at your local Home Depot/Menard’s/Lowe’s/Ace Hardware store. We also make Corner Brackets, Flat T brackets for joining other parts of your design, and Bent L’s for use as inside corners. And we make a Legless T™ (no vertical leg), and a Flat L (which is Flat like the T, but without the extra short leg). If you want to mix and match, just let us know how many of each you would like and we will set you up a custom listing. Made in the USA: All our PostHugger™ Brackets and metal artwork products are Made in America with American-Made Steel! Visit all our other website offerings on eBay or our PostHugger website. Any Questions? Feel free to reach out! Our standard Policies & Terms and Conditions apply to all orders of this product. © 2024 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission. Normal 0 false false false EN-US X-NONE X-NONE

PostHugger™ Flat Y™ Cross Bracket | For 4×4 (3.5″x3.5″) Posts

Normal 0 false false false EN-US X-NONE X-NONE – – For 4×4 (3.5″ x3.5″) Posts & Beams – – For 4×4 (3.5″ x3.5″) Posts & Beams – – For 4×4 (3.5″ x3.5″) Posts & Beams Our Flat Y™ Brackets are a Y-shaped or 45-degree double-knee design — to provide extra, heavy duty support to new or existing DIY builds & structures such as where you have a structure post with two kicker sections coming off of it from each side. These brackets are sold individually and are FOR USE WITH 4 x 4 POSTS AND BEAMS (3.5” x 3.5”). Build your own rugged and heavy duty PostHugger™ Pergola, Double Pergola, shop/garage/CNC table, or deck with our USA made 1/8″ steel “Y Bracket”! These Flat Y™ Brackets are constructed from 1/8″ thick steel — great for extra, heavy duty support for all your new DIY projects, and equally perfect for fixing/reinforcing any build you already have! These brackets are not flimsy/bendable metal. A single corner bracket weighs over 2 pounds – – strong enough to take what you throw at it (or what you throw it at!), but not so heavy where they are hard to work with. And all our PostHugger™ Brackets are Made in America with American-Made Steel! We are the original designer of the PostHugger™ brackets, which may be copied, but never equaled! 🙂 If you find a PostHugger™ knockoff, give us a chance to meet or beat their price. Please note that unless you choose the powder coated option, these ship as raw, unpainted steel. You can either paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time. ***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.*** Our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. WOOD POSTS AND BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; you can pick them up at your local hardware store. Other PostHugger™ Bracket offerings (sold separately) include:Outside Corners- Used on outside corners to join/attach two incoming horizontal posts on top of an upright/vertical post. The holes line up with Bent L’s if you want to use them on the inside. Bent L’s – Used as an inside corner, either alone or in conjunction with an Outside Corner to make a steel/post/steel sandwich for aesthetics and/or additional strength. The holes also line up with our Flat T’s. Flat T Brackets – Used to join/attach two incoming horizontal posts which are resting on top of an upright/vertical post. The holes line up with the Bent L’s in case you want to use them in making an inside corner on the opposite side of your Flat T. Double Inside Corners- The bottom part of this bracket attaches to the inside corner of an upright post, which then allows each ear on the top part of the bracket to go under horizontal posts coming in from the left and right sides. The holes are offset so that if used on the same post as an Outside Corner, they will not collide. Flat L’s – Used to join other parts of your design. Two Piece Post Base – Used to bolt a post to concrete or other suitable surface. If your post is going up against a wall or other flat surface which would interfere with having four feet, you will want to use either our Half-a-Post-Base, our 3-Sided Post Base (which has three feet) or our Full Post Base (which has just two feet) so that your post can be closer to a wall. Half a Post Base – This bracket is just one half of the Two Piece Post Base, for those who only need one (or another odd number). Three-Sided Post Base – Similar to our other Post Bases, but with three sides/feet. Full Post Base – Similar to our other Post Bases but with fours sides and just two feet (on opposite sides). Legless T™ – This bracket is the same dimensions & placement of bolt holes as the “T” – just without the bottom “leg” of the “T”! It measures 5.5″ x 16.5″ for a 6×6 post, and 3.5″ x 10.25″ for a 4×4 Post.

Flat X™ Bracket – 90 degree cross angle brackets to provide extra, heavy duty support to new or existing DIY builds & structures. Flat Knee™ – This knee brace bracket sits flush against the outside of a knee joint. Bent Knee™ – This knee brace bracket is for use where you have a post coming in to meet another post at a 45° angle and want a bracket in the knee bend itself. If you would like to see customer photos (and a video!) of some of our brackets in use, click the link https://posthugger.com/photos/ © 2024 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.