Ultra Custom Pools

Item Tag: Calcium Carbonate

SYNKO Exterior Spackling Paste Repairs Wood & Masonry 1-Gallon Factory Direct!

THIS IS FACTORY DIRECT! An outstanding ready-to-use exterior spackling paste for filling cracks, voids, nail heads (primed), split beams, fascia, doors, windows and siding. A non-shrink, non-crack formula. Recommended for use on masonry, stucco, concrete, brick, cement block, asbestos shingles and primed metal, particle board or wood. Resists fungus and mildew. Dries white. DO NOT use as skim coat or in any joint subject to structural movement. Directions: 1. All areas to be repaired should be free of dirt, loose or peeling paint, chalk, etc. 2. Unpainted and exposed areas as well as porous surfaces should be primed and allowed to dry prior to patching. Prime exposed screws or nail heads. Patch must be primed and top-coated with a high quality exterior paint. 3. Sand glossy areas 4. Do not apply when rain or temperature below 50 degrees Fahrenheit is expected within 48 hours after application. 5. Apply with a wide putty knife, broad knife or trowel. Press firmly to surface. 6. Deep fills may require two or more applications. Normal fills, wipe clean. No need of sanding. 7. For a smoother finish, dip putty knife into water and smooth spackling lightly. 8. Can be sanded smooth if necessary when thoroughly dry. 9. Clean up with soap and water.

SYNKO Exterior Spackling Paste Spackle Repairs Wood, Masonry, Stucco 1-Quart

An outstanding ready-to-use exterior spackling paste for filling cracks, voids, nail heads (primed), split beams, fascia, doors, windows and siding. A non-shrink, non-crack formula. Recommended for use on masonry, stucco, concrete, brick, cement block, asbestos shingles and primed metal, particle board or wood. Resists fungus and mildew. Dries white. DO NOT use as skim coat or in any joint subject to structural movement. Directions: 1. All areas to be repaired should be free of dirt, loose or peeling paint, chalk, etc. 2. Unpainted and exposed areas as well as porous surfaces should be primed and allowed to dry prior to patching. Prime exposed screws or nail heads. Patch must be primed and top-coated with a high quality exterior paint. 3. Sand glossy areas 4. Do not apply when rain or temperature below 50 degrees Fahrenheit is expected within 48 hours after application. 5. Apply with a wide putty knife, broad knife or trowel. Press firmly to surface. 6. Deep fills may require two or more applications. Normal fills, wipe clean. No need of sanding. 7. For a smoother finish, dip putty knife into water and smooth spackling lightly. 8. Can be sanded smooth if necessary when thoroughly dry. 9. Clean up with soap and water.