Captain O-Ring – Replacement O-Ring Kit for Fleck 5600 / 5600SXT Water Softener
This kit includes all of the o-rings and quad-rings shown in your manual/parts diagram (21 total o-rings). Check out the photos for each o-ring location. (2) 13302 – Brine Spacer. (1) 11183 – Safety Brine Valve.
Culligan OR-34A (2 pack, 4 pcs) Replacement O-Rings for Culligan and Ace Filters
Culligan OR-34A (2 pack) Replacement O-Rings for Culligan and Ace Filters by Captain O-Ring Product Features: Includes 4 O-Rings (2x Smaller “A” O-Ring and 2x Larger “B” O-Ring) Fits: Culligan HF-150(A), HF-160, HF-360(A), and others (see description below) OR-34A should be replaced every two filter changes, or when leaking. Compatible with silicone lubricant (and many other lubricants) to ease installation. Manufactured and Warrantied by Captain O-Ring LLC Before replacing the o-ring, refer to the bottom of the sticker on of your Culligan filter housing. Two different o-ring sizes are enclosed: Sticker plates coded “Rev C” or higher, for models HF-150A, HF-360A, and Ace 45025 housings should use the smaller o-ring enclosed. Sticker plates coded “Rev A” or “Rev B” for models HF-150A and ALL other models (HF-160, HF-360, HF-365, Ace 45025, Ace 46764, Ace 49560) should use the larger o-ring enclosed. Note: The o-ring labels seen in the picture are just for representation. The o-rings can be identified by their size difference in the package using the instructions above to determine the correct size for your filter. The o-ring installation process is incredibly easy. To install the o-ring, remove the old o-ring and clean out the groove with a clean cloth. Lubricate the new o-ring with clean/new silicone grease. Press the o-ring into groove with two fingers, ensuring that it sits flat and level in the groove. What to expect: This item includes two (2) larger o-rings and two (2) smaller o-rings [4 o-rings total] in a resealable zip-top poly bag with “Captain O-Ring” branded packaging. Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.
Culligan OR-233 (3 pack) Replacement O-Rings for Culligan, Ace, etc Filters
Captain O-Ring – Culligan Compatible OR-233 Replacement Water Filter Housing ORings (3 Pack) Product Features: (3 Pack) 3″ Diameter OR-233 O-Rings. Used to seal the filter housing to the filter head/cap to fix and prevent leaks. The OR-233 O-Ring has been branded under Ace Hardware, American Plumber, Ametek, Culligan, Pentek, Watts, US Filter Plymouth Products Compatible with the following filter models: Culligan SY-2000, SY-2100, SY-2300, SY-2300S, SY-2500, SY-2650, US-600, US-640, US-600A; ACE Hardware 4158622; American Granby HFHP75BSLBP, HFHP75BSLBP20, HFHP75CSLWP; American Plumber WLCS-1000, WRO-3000, WRO-3500; Pentek RO-3000, RO-3500; Pentek US-1000, US-1500; Watts WP-5, WP-4V Direct replacement for the following part numbers: American Granby HOR4, American Plumber 151231-51, OR-233; Ametek OR-233; Culligan 411310, OR-233; Pentek 151231, OR-233; US Filter OR-233; Watts WP113045 Genuine Captain O-Ring Part (Manufactured and Warrantied by Captain O-Ring LLC) Culligan OR-233 Replacement O-Rings. This package includes three (3) replacement o-rings. The OR-233 o-ring is compatible with the following filter models: ACE Hardware 4158622 American Granby HFHP75BSLBP, HFHP75BSLBP20, HFHP75CSLWP American Plumber WLCS-1000, WRO-3000, WRO-3500 Pentek RO-3000, RO-3500 Culligan SY-2000, SY-2100, SY-2300, SY-2300S, SY-2500, SY-2650, US-600, US-640, US-600A Pentek US-1000, US-1500 Watts WP-5, WP-4V The OR-233 o-ring is a direct replacement for the following other part numbers: American Granby HOR4 American Plumber 151231-51, OR-233 Ametek OR-233 Culligan 411310, OR-233 Pentek 151231, OR-233 US Filter OR-233 Watts WP113045 The OR-233 o-ring measures approximately 2-7/8” inside diameter x 3-1/8” outside diameter x 1/8” thick. Please confirm these exact dimensions or the OR-233 part number (or other part numbers listed above) required in your water system before purchasing. What to expect: This item includes three (3) OR-233 o-rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging. Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.
OK25 O-Rings for OmniFilter OB1,WH5,U25 Water Filter Housings (2 Sets, 8pcs)
OK25 O-Rings for OmniFilter OB1,WH5,U25 Water Filter Housings (2 Sets, 8pcs) Product Features: (2 Sets) OmniFilter OK25 Replacement O-Ring Gasket Seals (Includes 4 sizes, 2 of each) Compatible with OmniFilter OB1, WH5, and U25 water filter housings. Different submodels/revisions of each of these models take differnet o-rings, and the OK25 kit contains all of the different sizes to ensure you have the right o-ring size needed for your OB1, WH5, or U25 housing. Quickly fix or prevent a leak in your water filter unit by replacing your filter housing o-ring with every third filter change Molded from NSF 61 certified buna-n rubber for safe and clean drinking water. Manufactured and Warrantied by Captain O-Ring LLC. Proudly assembled in the USA! The OK25 o-ring seals between your filter housing and filter head/cap on OmniFilter OB1, WH5, and U25 water filter housings. The OK25 o-ring kit contains four different o-ring sizes. This convenient 2 set package contains 2 of each size, for 8 o-rings total. What to expect: This item includes eight (8) o-rings in a resealable zip-top poly bag with “Captain O-Ring” branded packaging. Manufactured and warrantied against defect for one year by Captain O-Ring LLC. “Captain O-Ring” is a registered trademark of Captain O-Ring LLC.