Central Brass Escutcheon Nipple
30A Solar Panel Battery Charge Controller LCD Regulator Auto Dual USB 12V/24V
Multiple pro tection : Short-circuit protection, open-circuit protection, overcurrent protection, overload protection, and safety for use. Max Solar input：<50V. LCD Display : Large LCD display, easy to read the data.
30-100A MPPT Solar Panel Regulator Charge Controller 12V/24V Auto Focus Tracking
1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery. Build-in short circuit protection, open circuit protection, reverse protection, over load protection. Connect the photovoltaic module to the plus and minus regulator.
30A Solar Panel Battery Charge Controller LCD Regulator 12V/24V Auto Dual USB US
Description: – Advanced maximum power point tracking (PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. – Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. – Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. – Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. Package List: 1 x Solar Panel Battery Charge Controlle Built-in industrial microcontroller, fully 4-stage PWM charging management. Large LCD display, all parameters adjustable. Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. PWM Matching of mode to battery type: Please set the controller to the correct mode. B1 For lead-acid batteries B2 For lithium ternary batteries B3 For lithium-iron batteries Double MOSFET reverse current protection, low heat generatio
60A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB US
Product Description Features Thlevel solar charge controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Solar Charge Regulator can fully meet your home Photovoltaic system (including home lighting system) requirements. Connection steps: Connect the battery to the charge regulator. Connect the solar panels to the charge regulator. Connect the consumer to the charge regulator. NOTE: The reverse order applies when deinstalling. The wrong connection sequence will damage the controller. Specifications Load: Light Control System Voltage: 12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(defaul,adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(defaul,adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V Rated current: 60A Self-consume:(2)Solar panels —> (3)DC load. Disconnect order is (1)DC load —>(2)Solar panels —> (3) Battery Q: What battery type is this controller supported? A: Pay attention to this regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Q: Why the LCD screen become blank? A: When the battery voltage is too low, the controller will stop to output ( ≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V (default), 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V(default). Q: Why does the controller display 14.4V? A: If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don’t worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V. Q:How is it set to charge battery during the day and turn on at dusk? A: Press the [DOWN]button to ON/OF load manully at main display （The load can’t be switched manually in the light control state.） There are 3 options for the working mode. Mode 1 : [24HR] >> Load output 24 hours Mode 2 : [1-23HR] >> Load on aftersunset and dosed after setting hours Mode 3 : [0H] >> Dusk to Dawn
30A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB US
Designed for 12V / 24V solar battery charging systems with LCD display and dual USB interface. 🛡️ Built-in short circuit, open circuit, reverse polarity, overload, and reverse current protection. Rated Current 30A.
30A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB
Multiple pro tection : Short-circuit protection, open-circuit protection, overcurrent protection, overload protection, and safety for use. Max Solar input：<50V. LCD Display : Large LCD display, easy to read the data.
30A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB US
In the past ten years, we have provided related products and services to more than 150 countries around the world, and are committed to promoting solar energy products to more application fields and scenarios.