Ultra Custom Pools

Item Tag: clip

Wrap-On #14080 Roof & Gutter De-Icing Cable 80 ft 400 Watts

This pre-assembled cable has been designed for the sole purpose of preventing the formation of ice dams on pitched roofs with non-combustible tab shingles and in metal or plastic gutters and downspouts. (Not for use on metal roofs because of the risk of overheating, use self-regulating cable instead such as EasyHeat PSR, or the Danfoss RX). It provides drainage channels so that as natural thawing occurs, water has a path to flow off the roof and through the gutters and downspouts. This cable is not for use on a flat roof nor is it intended to clear the roof of snow and ice. The installation of this product is simple and it can be used with either metal or plastic gutters. Read and follow all instructions and pay particular attention to the following points: Install the cable when the outside temperature is above 50˚F because at lower temperatures shingle material may be brittle; Clear all leaves, pine needles and debris from the roof, gutters and downspouts before operating the cable. Do not plug the cable in unless it has been completely uncoiled or it will be damaged. Each package contains one ready-to-install cable, shingle clips, cable spacers and complete installation instructions. You will also need a tape measure, marker, gloves, ladder and a weatherproof GFCI outlet with control switch. Roof & Gutter Cables prevent water damage caused by snow and ice buildup. The Roof and Gutter cables work in conjunction with natural sunlight and a building’s own heat dissipation. When natural thawing occurs, the cables create a channel that allows water to flow off the roof and through gutters and downspouts. Easy to operate, they simply plug in for years of trouble-free operation. Wrap-On Roof and Gutter Cables are the ideal preventative maintenance for snow and ice buildup. They create channels on the roof, in the gutter and in the downspout that allow melting ice and snow to flow freely, eliminating ice dams and reducing icicle formation. They can be used safely on all metal, plastic and vinyl gutters and downspouts and are UL listed and CSA certified.Even in below freezing weather, snow on the roof will often thaw because of heat from the sun and heat loss from the house through the roof. As this melted snow reaches the roof overhang it refreezes. Here there is no heat loss so the roof surface is much colder. As this melted snow refreezes again and again on the roof overhang, an ice dam is formed. Soon water backs up under shingles, and leaks into the house. It’s not those big icicles that do the real damage, it’s the ice you don’t see that backs up in gutters and under shingles. When the ice melts it can really do a number on repair costs. Roof de-icing cable prevents this water and ice damage by providing a clear path for melting water to flow off the roof. It keeps roof edges, gutters and downspouts ice-free. Versatile design adapts to most roof and gutter configurations. This product is intended for the sole use of preventing ice dams from forming on inclined roofs with tab shingles, in gutters and downspouts. This roof de-icing cable is not intended for use as a snow melting system to clear roof of ice and snow. Easy to installApproved for metal and plastic guttersComplete with clips and spacersEach kit includes the Electric Roof De-icing Cable (Residential Grade, 120 Volt, 5 Watts/foot) and 6 foot power cord with plug and enough roof clips and downspout clip cable spacers to complete the installation.

Aluminum Gutter Hanger Bracket 5″ K STYLE Hangrite STRONG Channel form 10 pack☔️

📋 Product Information: Quantity of 10 Channel formed aluminum clip style gutter hangers for 5″ K style metal gutters The strongest Hidden Hanger Design of its type in the Industry. Since its introduction, the channel formed design hanger has set new strength standards for gutter hangers. Prevents gutter sag and hanger failure. Manufactured in the USA of heavy tempered 0.063 aluminum, they are self-bracing at the point of stress and the channel-formed design makes it the strongest hanger of its type. Front holds gutter firmly and will not open under load Features and Specifications: Fits all Metal 5″ K-style gutters, will NOT work with Plastic guttersRounded front rolls smoothly into place without marring gutterTight fold fits comfortably behind most drip edgesEnd clip snaps easily and snugly over back of gutterHolds up to 260 pull-poundsSuperior Durability to spikes if mounted with screwsCorrosive free 100% aluminum body, unlike steel which will rust.Completely hidden from below the eave once installedCompatible with most common gutter guard products, sits below the top of the gutter. For installation directly through the fascia into the rafter end use a 1-1/4″ or greater long screw (for price competition reasons screws may not be included, see this listings option selection for details) that will penetrate the mounting surface, if you need screws and they are not offered on this listing please see Nextridge’s screw offerings in our store. • Recommended hanger spacing is 24″ on centers in snowy or heavy rain regions. • Great for Straight or Angled Fascia Boards and Re-enforcing Existing Gutters • In order to keep costs low plastic bags may be removed to fit product into designated size shipping boxes Produces a great-looking installation that will hold up to wind, rain, sleet, snow and ice. Offered with or without Installation screws for sale on ebay by NextRidge 🚚 Free Same Day Shipping* 🔍 See More Gutter and Downspout Products at our eBay Store ✉️ Help and Questions? Send a message ℹ️ About us see our ebay ME Page NextRidge has been on ebay since 2001 and ships daily Monday through Friday for an authorized stocking distributor of Industry leading manufacturers of Gutter and Downspout products including Rainware Supply, QuickScrew, Speedscrew, Hangrite, Raytec, Hangtite, Geocel, and US Aluminum Products. *FREE SAME DAY SHIPPING may be available to your location if your payment is received by Noon EDT Mon.- Fri. See ebay listing shipping section for details. All trademarks, service marks, trade names and logos appearing in this ebay listing are the property of there respective owners. © 2001-2018, Nextridge, All Rights Reserved

30pcs Quarter Trim Panel Retainer Clip GJ2168885B02 for Mazda 6 Mazda 3 2 5

30pcs Quarter Trim Panel Retainer Clip GJ2168885B02 for Mazda 6 Mazda 3 2 5 626 CX-3 CX-30 CX-5 CX-7 CX-9 Miata Millenia MPV MX-5 MX-6 Protege. Trunk Trim Fastener, Under Cover Fastener, Cover Fastener, Pkg Tray Trim Fastener, Quarter Trim Panel Retainer, Rear Pillar Trim Clip, Cover Plate Fastener, Lock Pillar Trim Fastener, Lower Air Duct Clip, Quarter Pillar Trim Retainer Clip, Upper Quarter Trim Clip, Anchor Cover Fastener, Cover Retainer, Door Trim Panel Clip, Front Console Fastener, Hole Cover Retainer, Lower Trim Panel Clip, Retainer, Side Cover Fastener, Side Gate Trim Fastener, Side Trim Clip.

100 Pcs Door Trim Applique Clip Compatible with GM 11602522

100 Pcs Door Trim Applique Clip Compatible with GM 11602522 Auveco Part Number – 22994 Compatible with GM – 11602522 Compatible with CHEVY – 11602522 Dimensions: Bottom Head Diameter – 10MM Top Head Diameter – 10mm Stem Diameter – 4.4mm x 7mm Stem Length – 8mm Overall Height – 12.5mm Color – White Material – Nylon Type – Clip Axa Products offers its customers an expansive range of products and the best customer service possible. Our staff have over 15 years of experience serving consumers and is guaranteed to provide customers with the highest level of service and support. We strive to be at the forefront of industry trends, and respond quickly to meet the needs of the consumer, always staying ahead of the curve. Returns: – We have a 30-day return policy on all our items. Any problems upon receipt of the item must be informed to us through eBay Messages, we will be happy to assist you. All items must be returned in the same original condition as received with all accessories. Contact Us: – If you have questions about the product or your order please contact through via eBay Messages for assistance.