Crown Molding Transition, 1 middle Low Profile/Plank Style For 3 5/8″ Crown!
The surface face is 3” but can be made wider to suit your needs. These are made to bridge 2 pieces of crown in the middle if a room in lieu of an ugly scarf joint.
Crown Molding Corners (12 pack) low profile For 3 5/8” Crown Transition
Ok, so I had a customer who said she was on an extremely low budget and asked me to create the cheapest transition Corners possible for her so I’m re-listing it for everyone on a low budget! The corners are approximately 2 1/2″ from center to end. I installed guide tabs for easier installation! Listing photos depict 8 transitions but buyer will receive 12. Again, purchase price is for 12 Low Profile Transitions. These are well made and will transition up to 3 5/8″ molding perfectly! At $4 Each This is a lowball price for someone looking for a bargain! These have been fabricated from 3 5/8″ which I Purchased from Home Depot. The pictures depict the same inside corners that you’ll be receiving! These have also been primed and painted two coats with Benjamin Moore super white semi-gloss paint! if you need more or less or to combine an order with other transitions please message me and I will prepare a private listing for you.
Crown Molding transition, 1 middle Transition Block For 3 5/8″ Crown!
The surface face is 5 1/4”. These are made to bridge 2 pieces of crown in the middle if a room in lieu of an ugly scarf joint.
Crown Molding Corners 8 Insides + 1 Free Outside Corner For 3 5/8” Transitions!
These block style corners are made to transition 3 5/8” Crown Molding perfectly! blocks are approximately 6 3/4″ from top to bottom, dimensions of the transition piece (top) are surface height 3 1/4″ surface depth is 2 5/8”. purchase price is for 9 transitions , 8 inside corners and 1 low profile outside corner as shown in listing photo! I’ve installed guide tabs on The outside corner for ease of transitioning! These have also been primed and painted two coats with Benjamin Moore super white semi-gloss paint! block is pictured with standard 3 5/8″ crown molding. If you need more/less or different size, please message me as I can transition almost anything!
Crown Molding Corner, 1 middle Transition Block For 3 5/8″ Crown!
Each block style transition has 3 sides. blocks are approximately 7 1/2″ from top to bottom, dimensions of the transition piece (top above teardrop) are surface height 3 1/4” and have a surface depth of 2 5/8″. The surface face is 5 1/4”. Purchase price is for 1 block style transition. These are made to bridge 2 pieces of crown in the middle if a room in lieu of an ugly scarf joint. These have also been primed and painted two coats with Benjamin Moore super white semi-gloss paint! if you need more or to combine with any other blocks please let me know and I will create a listing for you .I am a custom fabricator and can usually transition anything. please be wary of the seller whose specifications are smaller than mine as properly installed crown molding should show reveal.