Ultra Custom Pools

Item Tag: DAYTON

DAYTON 48C174 Plastic 12″L 5″W 6″H Fan Grease Trap 48C174

Grease Collector Box, Fits Square Base Size Not Applicable, Compatible Grainger Part Number All Dayton Centrifugal Upblast Exhaust Ventilators, Material Plastic, Includes (2) 1/4 in x 3/4 in Flat Washer, (2) 1/4 in x 3/4 in Sheet Metal Screw, Mounting Hardware, For Fan Type Upblast Fans, For Fan Mounting Type Roof Mount, Container Capacity 1 gal, Standards AMCA, NFPA 96, UL 762, Compatible Manufacturer Model Number C-Series Product, For Use With Dayton Upblast Roof Ventilators Dayton Protect rooftop surfaces and roof-mounted centrifugal upblast ventilators from heavy grease residue with this Dayton(R) grease trap. It fastens directly to a ventilated roof curb and collects heavy grease residue while protecting the roof surface. A connection from ventilator drain to the grease box is include.

DAYTON Electric Wall/Ceiling Heat,11 A, 12.5 A 804T10

Electric Wall & Ceiling Unit Heater, Overall Height 16 in, Overall Width 14 in, Overall Depth 8 1/2 in, Air Flow 350 cfm, Air Temp. Rise 27 Degrees F, Voltage 208/240 V AC, 1 Phase, Wattage Output 2.2 kW, 3 kW, Heating Method Fan Forced, Heating Capacity 10,200 BtuH, 7,500 BtuH, Mounting Location Ceiling, Wall, Horizontal Air Throw 12 ft, Frequency 60 Hz, Amperage 11 A, 12.5 A, Control Type Mechanical Selector Dial, Contactor Coil Voltage 208/240V AC, Housing Color Beige.

DAYTON 4HU84 1 HP,Sewage Ejector Pump,460VAC 4HU84

Sewage Ejector Pump, HP 1, Rated Voltage 460V AC, Phase – Pumps 3, Amps 3.70 A, Motor Type Hermetically Sealed/Oil Filled, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material – Pumps Silicone Carbide, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Flow Rate @ 20 Ft. of Head 135 gpm, Flow Rate @ 40 Ft. of Head 70 gpm, Max. Diameter Solids 2 in, Body Dia. 12 5/8 in, Overall Height 19 1/16 in, Cord Length 20 ft, Discharge 2 in NPT These general purpose three-phase 200 to 480V sewage ejector pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They also use three-phase power that’s more efficient than one-phase power. Pumps remove sewage containing solids from drains where a gr.

DAYTON 3BB90 1 HP,Sewage Ejector Pump,240VAC 3BB90

Sewage Ejector Pump, HP 1, Rated Voltage 240V AC, Phase – Pumps 1, Amps 10.70 A, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material – Pumps Silicone Carbide, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Flow Rate @ 20 Ft. of Head 135 gpm, Flow Rate @ 40 Ft. of Head 70 gpm, Max. Diameter Solids 2 in, Body Dia. 12 5/8 in, Overall Height 19 1/16 in, Cord Length 20 ft, Discharge 2 in NPT, Max. Liquid Temp. 104 Degrees F, Max. Head 52 ft, RPM 3,450 RPM These general purpose single-phase 200 to 240V sewage ejector pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They remove sewage containing solids from drains where a gravity system won’t work, such as in septic systems that are below th.