Victron 12/12-50A DC-DC Battery Charger for dual battery systems.
Victron Energy Orion XS Smart DC to DC Battery Charger 12/12 50A (700W) – IP65 Dust & Waterproof – Fully Configurable – Remote Management Possible – Advanced Battery Protection The Ultimate Battery-to-Battery Charger The Orion XS is engineered from the ground up to redefine DC-DC battery charging. Perfect for dual-battery systems powered by (intelligent) alternators, it ensures top-tier performance and guarantees the safety of your setup. Unmatched Performance —98.5% efficiency: Maximizes energy use with minimal heat generation. —700W continuous output: Reliable power delivery, even in temperatures up to 40°C (104°F). —IP65 water-resistant design: Compact, durable, and built to fit seamlessly into any system.
Victron Energy Orion XS 12/12-50A 700W DC-DC Battery Charger BLUETOOTH
Victron Energy Orion XS Smart DC to DC Battery Charger 12/12 50A (700W) – IP65 Dust & Waterproof – Fully Configurable – Remote Management Possible – Advanced Battery Protection The Ultimate Battery-to-Battery Charger The Orion XS is engineered from the ground up to redefine DC-DC battery charging. Perfect for dual-battery systems powered by (intelligent) alternators, it ensures top-tier performance and guarantees the safety of your setup. Unmatched Performance 98.5% efficiency: Maximizes energy use with minimal heat generation. 700W continuous output: Reliable power delivery, even in temperatures up to 40°C (104°F). IP65 water-resistant design: Compact, durable, and built to fit seamlessly into any system. Configurable Charging Precisely adjust input and output currents to suit various (intelligent) alternators and battery types. Advanced algorithms protect alternators from overloading and ensure your service battery charges efficiently, backed by decades of expertise. Seamless Connectivity Use the VictronConnect app to configure your Orion XS and access real-time data and a 30-day performance history. Instant readouts provide quick insights without needing to pair devices. Unlock enhanced features with VRM (Remote Management) by connecting a communication center and premium display. Safe Charging Equipped with SafetyShield+ features and engine running detection to ensure safe operation. Compatible with all types of 12V alternators, including advanced Euro 5/6 intelligent alternators.
12V – 24V Battery Charge Controller Protection Module w/ LED Voltmeter XH-M603
The XH-M603 / HW-632 Battery Charging Control Module is a 12-24V battery charger control switch protection board with an LED voltage display. A DC input voltage source (30V maximum) such as a solar panel, DC power supply or battery charger is connected to the input, and a lead-acid, lithium-ion, polymer, nickel-cadmium or nickel-metal hydride battery is connected to the output. This module monitors the battery voltage and connects the charging input to the battery when the battery voltage drops below the “starting voltage” preset level, and disconnects the voltage from the battery when the battery voltage reaches the “stop voltage” preset level. In addition to regulating the charging voltage from an unregulated source such as a solar panel, this controller will also control the charging cycle, disconnecting the battery charger from the battery when it is fully charged, reducing overheating and degradation of the battery leading to longer battery life. XH-M603 Battery Charge Controller Features: Automatic control to turn the battery charging on and off. Not only saves energy but also extends the battery life and prevents battery overcharge. Easy to operate – with the start and stop buttons, you can set the start charging voltage and the stop charging voltage. Digital display – easy to read and monitor the charging status. After the parameter is set, it will be saved automatically. It is not necessary to reset the parameters after power off. XH-M603 Specifications: Input Voltage: 10V – 30V DC Display Precision: 0.1V Control Precision: 0.1V Output Type: Direct output Output Voltage: 30V maximum, recommended for batteries from 12V to 24V Voltage Accuracy: +/-0.1V Maximum current: 20A Size; 82 x 58 x 18 mm (3.2 x 2.3 x 0.8 inches) Operation: Connect the battery to the BAT connectors. Use a heavy-gauge wire capable of handling the maximum charging current. The module draws power from the battery for its operation, not from the charger input, therefore a battery MUST be connected to power the module. Set the Charge Starting (Cut On) Voltage: In the normal display voltage state, tapping the left button below the display will display the start charging voltage. Long press the button for 3 seconds to enter the programming mode. The display will flash. Press the left button to reduce the voltage setting, and the right button to increase it. Set the start charging voltage according to the battery’s specifications, typically around 11V for a 12V lead-acid battery. The module will revert from programming mode to operating mode within a few seconds after the voltage is set. Set the Charge Stop (Cut Off) Voltage: Set the voltage at which the charger will be disconnected from the battery. This is the voltage at which the battery is fully charged, typically around 13.7V for a 12V lead-acid battery. LED D4 will illuminate when the battery is charging. Factory Reset: In its power-on state, press the Start and Stop buttons at the same time, The LED display will display 888 representing the factory reset settings. NOTE: The controller does not have current limiting. The maximum current should be limited at the power source, if necessary. Package Includes: 1X XH-M603 Battery Charge Controller Protection Switch Digital Display On-Off Relay for 12V to 24V Batteries Get it faster! Stocks and ships from our Colorado US office for quick delivery.We provide FREE USPS First Class Shipping with Tracking – Not Economy Shipping