17-3/4 In. White Steel Bottom-Mount Self-Closing Drawer Slides (5-Pairs)
5 pairs of 17-3/4 In. White Steel Bottom-Mount Self-Closing Drawer Slides. • Slides have a capacity of 75 lbs. load limit. • Steel construction makes it sturdy and robust.
17-3/4 In. White Painted Steel Bottom-Mount Self-Closing Drawer Slides 1-Pair (2
Drawer slides feature a self-closing mechanism for easeSlides have a capacity of 75 lbs. load limitSteel construction makes it sturdy and robust These drawer slide kits are constructed of steel tracks with plastic rollers and come in a white powder-coated finish. They feature a self-closing design that commences at the final 2-1/2 in. from the end of the 17-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs., and it fits most bottom-mount drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Dia wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom-mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line’s model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer’s website.INSTALL OR REPLACE DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that don’t work properly, this fits most bottom/side-mounted drawer systems 18 inch deep. The drawer slides are constructed of steel tracks in a white finish and self-lubricating plastic rollers.SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2 inch from the end of the 17-3/4 inch long tracks when closing.EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website.75 LBS MAXIMUM SAFE LOAD CAPACITY – The maximum safe load capacity for the drawer slide kit is 75 lbs. and is for use in 18 inch deep drawers. It features a positive stop in the closed position and a double stop in the open position, so it doesn’t pull too far out and fall off the tracks.INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2 inch on left and right sides, 1/4 inch at the bottom and 5/8 inch at the top.Ideal for use in kitchen cabinetsInstallation fasteners and instructions are includedFor further dimensional information, please see the line drawing
17-3/4 In White Painted Steel Bottom-Mount Self-Closing Drawer Slides 1-Pair
17-3/4 In. White Painted Steel Bottom-Mount Self-Closing Drawer Slides 1-Pair (2
17-3/4 In. • Slides have a capacity of 75 lbs. load limit.
LAMP ESR-1-18 Drawer Slide,Friction,31 in Ext L,PR 5KDU2
Drawer Slide, Closure Type Non-Self-Closing, Mounting Type Side, Glide Mechanism Friction, Finish Zinc Plated, Extension Type 3/4 Extension, Disconnect Method Front, Closed Length 18 in, Travel Length 13 in, Side Mount Load Cap. per Pair 90 lb, Load Capacity 90 lb, Extended Length 31 in, Material Stainless Steel, Gray, 1 Pair.
Drawer Slides, 1 Pair 60Inch Locking Drawer Slides, 500Lbs Load Capacity, Side M
【LARGE LOAD CAPACITY】- The drawer slides can can support 500lbs maximum weight when the drawer is not pulled out. While when the drawer is fully pulled out, the maximum weight capacity is 177lbs. All three sections of rails can be pulled out and allow for the entire drawer to be reached.
40 Inch Heavy Duty Drawer Slides, Full Extension, 250 lb Capacity, 1 Pair
The slides have been tested for 100,000 open and close cycles.
Hardware Resources 300FU16 300FU Series 16 Inch Full Extension Side Mount Ball
Hardware Resources 300FU16 300FU Series 16 Inch Full Extension Side Mount Ball Bearing Drawer Slide with 150 Lbs. Weight Capacity – Pair – Zinc. Specifications Condition: Open BoxProduct Identifier: bci2955674Product Finish/Color: ZincManufacturer: Hardware ResourcesProduct Type: Ball Bearing SlidesDrawer Length: 16.5Extension: 16Height: 2Length: 16Max Capacity (Pounds): 150Minimum Cabinet Depth: 16Nominal Length: 16Product Weight: 3.74Quantity: 2Adjustable: YesCabinet Type: Panel (Frameless)Configuration: Drawer SlidesDetent: YesDisconnect Style: LeverExtension Type: Full ExtensionFunction: Drawer SlideInstallation Type: Side MountMaterial: SteelMounting Type: Side MountPush to Open: NoSelf Closing: NoSlide Type: Ball BearingSoft Close: NoSuggested Room Fit: Bathroom, KitchenApproved for Commercial Use: YesBHMA Certification: Grade 1Collection: 300FUProduct Class: Commercial, ResidentialSeries: 300FUModel Name: 300FU16
Heavy Duty Locking Drawer Slides 12-60 Inch, 500 lbs Capacity, Full Extension
Heavy-Duty Drawer Slides – 250 LB Capacity. Engineered with precision and durability in mind, our drawer slides are designed to handle your heaviest loads with ease. Here’s why they stand out Pro Tip: Shorter slides can support even greater weight!
VEVOR 1 Pair 16-60 in Soft-Close Drawer Slides Ball Bearing Full Extension
Maximize your drawer space with ease. Invest in the durability and strength of the KFFKFF Drawer Slides. Boasting a remarkable load-bearing capacity of 250 lbs, these slides effortlessly handle all your storage needs.