Arctic Air for R22 | 2 Cans + Brass Gauge | 4oz EnviroSafe | Get Colder Air!

DescriptionThis is not a refrigerant! This is NOT R22 or R22A refrigerant.An AC booster for 22 systems!Drying agentColder airLonger lifeA/C boosterThis product is a combination of 2 Enviro-Safe products mixed into 1 to promote maximum cooling performance.It will remove moisture from the AC system.As most people know, moisture = corrosion and corrosion lead to leaks. Nobody wants leaks in their AC system!This product also will reduce friction in system and provide colder air duct temps in most cases.Cannot be used in a fully charged system! Directions for Use: Read and understand all warnings and directions before use. As per use with any flammable substance, take adequate precautions during use. 1. Shake can well. 2. Install can tap valve and charging hose. 3. Install charging hose on low pressure side ONLY. 4. Invert can. 5. Install all product from can. 6. Operate system for thirty (30) minutes with air conditioning system operating at normal temperature. 7. For systems containing excessive moisture, ProDry may be required in addition to Arctic Air. 8. Discard empty can according to all rules and regulations for disposal in your area. Note: If an air conditioning system charged with Enviro-Safe develops a leak, it is recommended to evacuate any refrigerant before adding any dye charge, oil charge, or before installation of any refrigerant.

Envirosafe Arctic Air for R22, R-22, Proseal XL4, Oil Charge with Gauge

ARCTIC An AC booster for 22 systems!Drying agentColder airLonger lifeA/C boosterThis product is a combination of 2 Enviro-Safe products mixed into 1 to promote maximum cooling performance.It will remove moisture from the AC system.As most people know, moisture = corrosion and corrosion lead to leaks. Nobody wants leaks in their AC system!This product also will reduce friction in system and provide colder air duct temps in most cases.Cannot be used in a fully charged system! PROSEAL XL4Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder jointsEnviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applicationsOne can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.If the a/c system that will not hold a vacuum, you need to use the Enviro-Safe Prodry XL4.The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system!For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes.Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. If there is still Proseal XL4 in the system it will reseal the schrader.DO NOT use in ammonia systemsDO NOT use in CO2 systemsDO NOT use in R410a systems- Pressure is too high and will explode the can- You MUST use the Enviro-Safe Proseal XL4 Direct Inject line of products.Gas propelled Installs the same way as refrigerant

Envirosafe Arctic Air for R22, AC Refrigerant Support, (3) cans and gauge

An AC boosterDrying agentColder airLonger lifeA/C boosterThis product is a combination of 2 Enviro-Safe products mixed into 1 to promote maximum cooling performance.It will remove moisture from the AC system.As most people know, moisture = corrosion and corrosion lead to leaks. Nobody wants leaks in their AC system!This product also will reduce friction in system and provide colder air duct temps in most cases. “You must be EPA certified to purchase this product and show proof before item will be shipped.”