Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft Water
Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft WaterDESCRIPTION**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. Copyright © Aplus Water LLC 2020 Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.See our other items**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK — Complete water softener comes with : — 1.5 CUBIC FEET OF RESIN, — 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), — FLECK 9100SXT CONTROLLER, — TWO MINERAL TANKS, — Salt Tank, BYPASS, — COMPLETE SYSTEM 50X18X62 inches, — 3/4 inch or 1 inch connections, — (14x14x36) BRINE TANK w/safety float, — AVAILABLE IN BLUE, BLACK OR ALMOND — You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft Water**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. See our other itemsDESCRIPTION Copyright © Aplus Water LLC 2020 Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer.
Fleck 9100 SXT Replacement Softener Valve Commercial/Large Home Fleck 9100 SXT
Set of 3/4 Top / Bottom FRP Distributors for FLECK Water Softener 1.05″ Strainer
1. Top distributor 3/4″ F0601, 0.25mm slots Prevents resin loss during backwash. The Fleck 18280 is an upper media screen (aka Top Collector) for the Fleck 5600 and 2510 product platforms. It counter-clockwise twist-locks to the bottom of the control valve and receives a standard 1.05″ OD riser tube. Known analogues:Top 1.05 Twist On Basket Strainer 1.05 O.D. DistributorFLECK UPPER MEDIA SCREEN (18280)FL18280-01 Top Collector, Bayonet, 1.05″ X .020 (White)Fleck FL18280 COLLECTOR, TOP, 1″ X .011. (Grey) Twist-on style. Used for most Fleck Residential Valves, as well as Legacy and Runxin Residential Valves.TDB1050-FMBS, Fleck 5600 Top Bskt, 1.050 FM, 18280-02Supplier Part #: 18280-02 Fleck 5600 Top Bskt, 1.050 FM Fleck 5600 Top Basket, 1.050″ Fine MeshBoth Top/Bottom Distributor are high-efficiency Filtration Water Softeners Parts. 2. Bottom distributor 3/4″ F0602, 0.25mm slotsPrevents resin loss during Service. The F0602 is an lower media screen (aka Bottom Collector) for any 1.05″ (3/4″) product platforms. It fits a standard 1.05″ OD riser tube, glue-locks to the bottom side of the dip-pipe.Lower distributor 3/4″ F0602, 0.25mm slots1.05 inch O.D. Bottom Distributor .010″ – .013″ slotsUsed to make Distributor Tube with a piece of 3/4″ SDR21 PVC Pipe ( gluing the distributor to the PVC pipe with PVC Cement ).This 1.05″ O.D. pipe size is used on all new residential valves.Some older valves used the 13/16″ O.D. tubes, but you can still use the larger 1.05″ distributor and adapt to your old valve by gluing ( use PVC Cement ) a 6″ section of your old 13/16″ tube into the center of a piece of 3/4″ PVC pipe that is Schedule 40.You don’t use a “coupler”, but the actual pipe, 3/4″ Schedule 40 PVC used with the MD1236, since the INNER diameter matches the OUTER diameter of the 13/16″ pipe it will fit tightly inside the new 3/4″ PVC ( must be Schedule 40 ). Your old distributor pipe can usually be a guide to the length or height your new pipe will need to be ( And it must be Touching the Bottom of the Tank ).If the Valve is a Fleck 5600, then you will need the new tube to be equal to the top of the resin tank ( not more than 1/4″ above ).It is helpful to “round” or “smooth” the top edges of the new PVC pipe with sand paper so that insertion into the valve does not damage the distributor o-ring in the valve body. Both Top/Bottom Distributor are high-efficiency Filtration Water Softeners Parts.