Ultra Custom Pools

Item Tag: Flexible

150W ETFE Flexible Solar Panel 12V Monocrystalline Charger RV Boat Marine Camp

Cell Type Premium Monocrystalline Silicon. 1 x Monocrystalline Flexible Solar Panel with Pre-wired Cables. Upg rade your off-grid power system with our premium solar power solutions. Ultra-Flexible & Durable Panel: Aerodynamic, lightweight, and bendable design perfect for curved surfaces on RV roofs, marine decks, or uneven structures.

100A MPPT Solar Charge Controller 12V/24V 36V 48V Auto PV 150V MAX 5000W USB Z2

OOYCYOO 100A MPPT Solar Charge Controller 12V 24V 36V 48V Auto PV 150V MAX 5000W MPPT 100A 12V 24V PV 100V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W MPPT 100A 12V 24V 36V 48V PV 150V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3800W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:5000W Overview OOYCYOO 100Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 100A solar charge controller 100% MPPT technology 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 100A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time 98.1 % (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s the best efficiency.) 12V system (DC20V〜DC96V) 24V system (DC37V-DC196V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC144V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (1300W) 24V system (2600W) 36V system (3800W) 48V system (5000W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 100A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy 40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 3.8 Gross weight(Kg) 4.0 Package Includes 1 x 100A MPPT Solar Charge Controller 1 x English User Manua

Solopower 0.5V 14.5″x1.5″ Lot of 100 CIGS Solar Cells -Lightweight Thin Flexible

Solopower 0.5V 14.5″x1.5″ Lot of 100 CIGS Solar Cells -Lightweight Thin Flexible  Solopower 0.5V 14.5″x1.5″ Lot of 100 CIGS Solar Cells -Lightweight Thin Flexible This lot of 100 CIGS Solar Cells are made of super flexible stainless steel and came out of the Solopower plant in San Jose, California. We have been unable to locate any written specifications but we have measured them to be 0.50 volts. Regarding the amp output these are the same cells used in the Solopower SL1 solar panels which used 60 cells for 75 to 90 watt panels making them between 2.5 and 3 amps or 1.25 to 1.5 watts per cell. Raw Solar Cell Uncoated. Will need to be encapsulated to withstand weather. Raw Solar Cell Uncoated Length: 368.5mm (14.5 inches) Width: 38.1mm (1.5 inches) Height: .253mm (.01 inches) Individual Cell Weight: 0.32 oz Lightweight Stainless Steel Structure CIGS Solar Cells which are Semi-Flexible     Condition: New This lot of 100 CIGS Solar Cells are made of super flexible stainless steel and came out of the Solopower plant in San Jose, California. We have been unable to locate any written specifications but we have measured them to be 0.50 volts. Regarding the amp output these are the same cells used in the Solopower SL1 solar panels which used 60 cells for 75 to 90 watt panels making them between 2.5 and 3 amps or 1.25 to 1.5 watts per cell. CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

45 FT 8/2 UF-B W/GROUND UNDERGROUND FEEDER DIRECT BURIAL WIRE/CABLE

45′ 8-2 UF-B W/GROUND UNDERGROUND FEEDER DIRECT BURIAL WIRE/CABLE 8 GAUGE 2 CONDUCTOR W/GROUND – CONDUCTORS ARE BLACK & WHITE W/BARE GROUND We have no returns on cut wire unless there is a problem with the quality, the cut of the wire, or if we, the seller, makes a mistake, then we will more than gladly accept a return. This is SouthwireCopper UF-BUnderground Feeder and Branch Circuit Cable. 600 Volt. Copper Conductors. Sunlight, Moisture, and Fungus Resistant Overall PVC Jacket. APPLICATIONSSouthwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts. STANDARDS & REFERENCESSouthwire® copper UF-B cable complies with the following: • ASTM – B3 and B-8 • UL Standard 83 • UL Standard 493 • Federal Specification A-A-59544 • National Electrical Code, NFPA 70, 2011 Edition • RoHS/ REACH CONSTRUCTIONSouthwire® copper UF-B cable is manufactured as a 2 or 3 conductor cable, with or without a ground wire. Copper conductors are annealed (soft) copper, solid or compressed stranded. Phase conductors are polyvinyl chloride (PVC) insulated, nylon jacketed, color coded for identification purposes. Jacketed with sunlight, moisture and fungus resistant gray PVC. PLEASE MESSAGE US FOR LARGER CUSTOM CUT LENGTHS. We ship BEST WAY: Fed Ex or sellers choice. We do this in order to keep offering you great products and be able to offer “free shipping”. Our “free shipping” is for the lower 48 states only. If you live outside the lower 48 please contact us for estimated shipping charges prior to bidding/buying. We are selling this only to the lower 48 United States.This product will be new and unused. Thanks so much for viewing our products. Please keep checking back for more great products. Normal 0 false false false EN-US X-NONE X-NONE

45 ft 6/3 NM-B WG Wire/Cable Non-Metallic

BRAND NEW WIRE CUT OFF ORIGINAL REELApplication: Type NM-B (non-metallic 90° C) typically used in indoor applications inside wall cavities and attics. Please see Article 334 of the National Electrical Code (NEC) for further applications.Construction: 3 conductor, 6 gauge stranded construction has the insulated conductors (Black, Red and White) twisted. The ground wire is wrapped with fire-retardant paper and twisted between the insulated conductors. Ground wire is 10 gauge solid. The entire construction is wrapped with a paper separator before applying the jacket which is black on 6 gauge NM-B. PVC (polyvinyl chloride) jacket is applied over the complete assembly. Conductors: Stranded conductors are soft, uncoated copper per ASTM B3.Standards: UL 719: E9810 UL 83: E15119 ASTM B3*It is the sole responsibility of you, the buyer to determine suitability of this product for its intended use and application.We cannot accept returns on cut wire unless we have made a mistake in the cut, shipped the wrong item, or if the wire is defective in any way. This is a brand new domestic made wire. We buy from reputable wire companies who stand behind their product.Thank you for looking. Please visit my store for more wire types and sizes. (WE SHIP WITHIN 1 DAY AFTER YOU PLACE YOUR ORDER. We can not guarantee the delivery date. Only the ship date. If quicker delivery is needed, please contact us before you place your order.)

45 ft 6/2 NM-B WG Wire/Cable Non-Metallic

BRAND NEW WIRE CUT OFF ORIGINAL REELApplication: Type NM-B (non-metallic 90° C) typically used in indoor applications inside wall cavities and attics. Please see Article 334 of the National Electrical Code (NEC) for further applications.Construction: 2 conductor, 6 gauge stranded construction has the insulated conductors (Black and White) parallel. The ground wire is wrapped with fire-retardant paper and laid parallel between the insulated conductors. Ground wire is 10 gauge solid. The entire construction is wrapped with a paper separator before applying the jacket which is black on 6 gauge NM-B. PVC (polyvinyl chloride) jacket is applied over the complete assembly. Conductors: Stranded conductors are soft, uncoated copper per ASTM B3.Standards: UL 719: E9810 UL 83: E15119 ASTM B3*It is the sole responsibility of you, the buyer to determine suitability of this product for its intended use and application.We cannot accept returns on cut wire unless we have made a mistake in the cut, shipped the wrong item, or if the wire is defective in any way. This is a brand new domestic made wire. We buy from reputable wire companies who stand behind their product.Thank you for looking. Please visit my store for more wire types and sizes.(WE SHIP WITHIN 1 DAY AFTER YOU PLACE YOUR ORDER. We can not guarantee the delivery date. Only the ship date. If quicker delivery is needed, please contact us before you place your order.)