Ultra Custom Pools

Item Tag: Floor Heating

SunTouch Radiant Floor Heating Cable / Spool 120 V MADE in the USA Complete KIT

start_elivehelp_btncodeend_elivehelp_btncodeSunTouch Radiant Floor Heat Cable / Spool – KIT 120Volt Also available 240Volt—–Kit IncludeWarmWire Spool/s Programmable Thermostat 120/240VCable Metal Strap 1 (1 for every 50 sq. ft.)Installation ManualMultiple cables wired in parallel can be used to achieve larger coverage area—–One step Cable/Spool installation1. Lay down Cable/Spool 2. Install Tile (no need to embed in self leveling or mortar) The safest and easiest-to-install heating in the industry. —–It is Listed by UL for the U.S. and Canada, and tested by Tile Council of America for all residential and moderate commercial applications. Because our SunTouch radiant floor heat Spools use a special braided twin wire design; it registers nearly zero EMF when measured 1/2 inch above the wire. SunTouch heated floor Spool were the first with this patented innovation!• Single point connection • High-performance ETFE insulation • Strengthened with aramid reinforcing • Protected with stainless steel jacket • Sizes up to 240 sq. ft. on a single Spool • UL listed in Canada & USA • Ultra-low EMF • Grounded from end to end 244-8 The SunTouch Spool floor heating Spool are easy to install by securing the cable straps to the subfloor and stretching the wire between them. Moreover, these are covered with thinset or self leveling mortar, which make these suitable for almost any floor covering.SunTouch Cables can be used to warm areas as small as a powder room or as large as 240 sq. ft. Even larger areas can be warmed with multiple cables wired in parallel. —– Some of the features of WarmFloor Spool are: Exceed CSA-130New urethane outer jacketStainless steel braid shines through2″ o.c. delivers 15 Watts per Sq. Ft. in concrete basement slabs, sun rooms and high heat loss areas2.5″ o.c. delivers 12 Watts per Sq. Ft. in bathrooms, kitchens, dining and living areas3″ o.c. delivers 10 Watts per Sq. Ft. in hallways, entries and low heat loss areas*The 2.5″ spacing is most commonly used.—–Just a few benefits of our Floor Warming Cable/Spool: 1. The industry’s first thin, open-weave construction allows thin-set or self-leveling mortar to flow through the cable and easily bond with the underlying material. This one-step application adds only 1/8″ thickness over a normal tile installation.2. The industry’s first single power lead construction makes Spools Cables easy to install and simpler to connect to the control. 3. The industry’s highest-quality heating wire using Aramid reinforcing, ETFE high-temperature insulation, XLPE (PEX) jacket, and oxygen-free copper alloys for corrosion resistance, temperature resistance, abrasion resistance, and longevity. 4. The industry’s first twin-wire construction creates ultra-low EMF. 5. 120-VAC and 240-VAC models available for small residential to large commercial applications. 6. The industry’s only shielded and fully grounded 10-ft. power lead provides safety and job site durability. Power leads are color-coded for 120 VAC or 240 VAC. Electric radiant heated floor Cables are designed to warm stone and tile floors in bathrooms, kitchens, entries and sun roomsForget ice cold floors. Our electric radiant floor heating feels like a gentle foot-massage or a walk on a warm beach. Almost any surface in your home can become warm and dry.Energy efficient, inexpensive to operateDual wire technology reduces electromagnetic fields (EMF) to ultra-low levelsSingle point power connection makes layout and wiring a snapArmored power lead, wire straight to the electrical box, no conduit requiredOpen weave construction for easy application of thin-set and mortar without compromising the bond of your floor covering to the sub-floorHigh quality programmable and non-programmable thermostat controls availableUL listed and manufactured in the USA with the highest quality materials25 Year Manufacturer Warranty Data & Coverage Area 120 Volt Model No. Sq.Ft @ 2″ O.C. Sq.Ft @ 2.5″ O.C. Sq.Ft @ 3″ O.C. Wire Length Ft. Amperage Draw Resistance (ohms) WWS-120-10 8 10 12 47 1.0 108-132 WWS-120-15 12 15 18 71 1.5 72-88 WWS-120-20 16 20 24 94 2.0 52-64 WWS-120-25 20 25 30 118 2.5 41-51 WWS-120-30 24 30 36 141 3.0 33-40 WWS-120-35 28 35 42 165 3.5 28-34 WWS-120-40 32 40 48 188 4.0 24-30 WWS-120-45 36 45 54 212 4.5 22-27 WWS-120-50 40 50 60 235 5.0 19-24 WWS-120-60 48 60 72 282 6.0 16-20 WWS-120-70 56 70 84 329 7.0 14-17 WWS-120-80 64 80 96 376 8.0 12-15 WWS-120-90 72 90 108 423 9.0 11-13 WWS-120-100 80 100 120 470 10.0 9-12 —–Shipping & Returns USA SELLER – In stock – Ship Same Day 30 Days money back guarantee —–Contact UsFor help of any sort, contact us by selecting ‘contact seller’ optionOur physical store is open to the publicMon – Fri 7:00 am – 5:00 pmSunday – 8:00 am – 12:00 pmVisit our store for more products http://stores.ebay.com/FlooringSupplyShop

Warmup Radiant Floor Heating Cable / Spool 120 Volt MADE in the USA

Warmup DCM-PRO Radiant Floor Heating Cable / Spool – 120Volt Also available 240Volt Listing are for Cable only, for thermostat and accessories check this pagehttp://stores.ebay.com/FlooringSupplyShop/Radiant-Floor-Heating-/_i.html?_fsub=771234619 How to orderfrom drop down menu select the size you want DCM-C-120-65-5-sq mean 5 sq ft Plastic strap or Underlayment NOT included Multiple cables wired in parallel can be used to achieve larger coverage area One step Cable/Spool installation 1. Lay down Cable/Spool 2. Install Tile (no need to embed in self leveling or mortar)The safest and easiest-to-install heating in the industry. —–It is Listed by UL for the U.S. and Canada, and tested by Tile Council of America for all residential and moderate commercial applications. • The Warmup DCM-PRO Cable is a custom designed cable compatible with all uncoupling membranes. It can be installed at 2, 3 or 4 pegs. The cable itself allows primary heating thanks to the twin-core ETFE cable, for highest output. It is guaranteed 30-years. Even better results when used with Warmup 4iE® Smart Thermostat.• The DCM-PRO Heating Cable is durable and flexible. It’s ETFE inner jacket allows for high heat output while it’s PVC outer sleeve protects for a smooth installation. The DCM-PRO Heating cable is suitable for use with both Membrane options.The DCM-PRO Membrane’s castellations make fitting the Heating Cable easy, quick, and tool free! The DCM-PRO Membrane protects the secured cable from any potential damage during installation – leading to a reduced risk of cable failures. Specifications; Operating voltage – 120V, 208V or 240V Thickness – 3/16” (4.5mm – +/- 0.2mm) Output – Approx. 4W/lin foot Construction – Multi-stranded, dual wire Inner insulation – ETFE Outer jacket – PVC Earth braid – 85% min copper Cold lead – 10ft (3m) long, 2 core braided The Warmup DCM-PRO Cable is compatible with Schluter® DITRA-HEAT, Prodeso Heat Mat, Flextherm FLEXSnap, Heatmatrix and Warmup DCM-PRO Membrane WARRANTY & MAINTENANCE When installed according to the installation manual, the DCM-PRO Cable is covered with Warmup’s 30-year manufacturer warranty.—– Data & Coverage Area 120 Volt Model No. Sq.Ft @ 2 pegs Sq.Ft @ 3 pegs Sq.Ft @ 4 pegs Cable Length Ft. Amperage Draw Resistance (ohms) DCM-120-65 3 5 7 16.7 0.5 221.5 DCM-120-130 7 10 13 33.1 1.1 110.8 DCM-120-195 10 15 20 49.9 1.6 73.8 DCM-120-260 13 20 27 66.3 2.2 55.4 DCM-120-325 17 25 33 83.0 2.7 44.3 DCM-120-390 20 30 40 99.4 3.3 36.9 DCM-120-525 27 40 53 132.9 4.4 27.4 DCM-120-655 33 50 67 166.0 5.5 22.0 DCM-120-785 40 60 80 199.1 6.5 18.3 DCM-120-920 47 70 93 232.3 7.7 15.6 DCM-120-1050 53 80 107 265.4 8.8 13.7 DCM-120-1180 60 90 120 298.6 9.8 12.2 DCM-120-1315 67 100 133 331.7 11.0 11.0 DCM-120-1445 73 110 147 364.8 12.0 10.0 DCM-120-1575 80 120 160 398.0 13.1 9.1 —–Shipping & Returns USA SELLER – In stock – Ship Same Day 30 Days money back guarantee —–Contact UsFor help of any sort, contact us by selecting ‘contact seller’ optionOur physical store is open to the publicMon – Fri 7:00 am – 5:00 pmSunday – 8:00 am – 12:00 pmVisit our store for more products http://stores.ebay.com/FlooringSupplyShop