10″ Clear Standard Whole House Water Filter System 50 Micron Sediment Filter
Untitled Document 10 Inches European Design Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port Sediment Cartridges 50 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 50 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 50 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-127-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 50 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.75 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 4.75 IN/12 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 4.75 IN/12 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
10″ Clear Standard Whole House Water Filter System 4 Sediment 25 Micron Filters
Untitled Document 10 Inches Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Yearly Supply (4) Sediment Cartridges 25 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 25 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 25 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-125-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 25 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.5 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 5.125 IN/13.02 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 5.125 IN/13.02 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
Upgrade SimPure WP2-400GPD 8 Stage UV Reverse Osmosis Water Filter System 0 TDS
SimPure WP2-400UV Tankless Reverse Osmosis System Under Sink With UV-C Sterilization Zero TDS, 400 GPD RO Water Filter System , Ultra Safe 8-Stage Drinking Water Filtration System, 1.5:1 Pure to Drain Water Purification with Booster Pump, Upgrade Stainless Steel Panel, SUS304 FaucetFor Household, Offices, Restaurant, Salons, Labs, etc. Description:【UV+RO 8-Stage Tankless Reverse Osmosis System】The SimPure WP2-400UV has been verified and meets the NSF/ANSI 58 Standard. This ensures its exceptional quality and performance. It can convert your tap water into pure and healthy drinking water by removing 99.99% of the 1,000+ contaminants including viruses, bacteria, chemicals (PFOA/PFOS, Pharmaceuticals), heavy metals (Lead, Arsenicetc), chlorine, TDS (fluoride, nitrates/nitrites) and etc. Say goodbye to the hidden dangers of tap water and eliminate the need to purchase bottled water for your home.【95%+ TDS Removal Rate】SimPure high-efficiency RO Filter removes contaminants 0.0001 microns or greater in diamete. This tankless ro water filter system is equipped with SimPure special reverse osmosis membrane, so the TDS Removal Rate can reach up to 95%+. If the TDS of your tap water is between 0-200ppm, the filtered water will be close to 0ppm. If the TDS is between 200-500ppm, the filtered water will be below 25ppm. And If the TDS is between 500-1000ppm, the TDS removal rate can also reach 90%+. If the TDS is >1000ppm, then we recommend you buy the pre-filter to pretreat the water, otherwise the large particles in the water are easy to block the filter element.【UV Water Purifier】Use no chemicals and emits absolutely no by-products, effectively destroying 99.999% of microorganisms, bacteria, germs more thorough sterilization from your water. SimPure UV purification system combined with 4-Larger Stages RO Filtration System, can make water purification to another level. Taste the difference!.【400 GPD & 1.5:1 Pure to Drain Ratio】WP2-400UV offers faster flow-400 gallons per day with lower waste 1.5:1 pure to drain ratio, which will save your water bills. Great for household and light commercial in Restaurants, Salons, Labs, and Offices all benefit in their ways from high-quality RO water.【RO System With Booster Pump】With a booster pump, you will never worry for low water pressure, it will easily booster your water pressure to the optimal level and run the RO system more efficiently, producing the purified water fater. Meanwhile, saving at least 50% more waste water than a traditional RO system without a booster pump.【Tankless Design】SimPure WP2-400UV adopts tankless design, which can save up to 70% of your under sink space. It will be much easier and more convenient to install, ready to use within 30 minutes. Also you can get rid of the water tank, avoid the secondary pollution. It supplies you 24/7 fast and stable flow purified water, never need to wait.【Upgrade Stainless Steel Panel】With stainless steel panel, protect your machine from corrosion and damp, Anti-friction, waterproof, oil-proof.【SERVING USA SINCE 2006】Seattle, WA USA, SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product. SimPure is specializing in creating ergonomically designed, efficient household filtration, and purification systems. SimPure technology focuses on water purification products for more than 15 years. Bullet Specification:TDS (Total dissolved solids):≥99.87%PF0S/PFOA:＞98.24%Chlorine:＞99.49%Lead:＞96.62%Nitrates:＞99.98%Fluoride:＞99.77%Chromium:＞98.70%Arsenic:＞99.84%Total coliforms:＞99.99%Who we are?SimPure believe that bright futures for humanity begin with clean water, and we have made it our mission to provide that. In short 10 years, successfully among the world leaders in membrane application, and proudly passed ISO9001, CE, FDA, and NSF certification early in 2013.What we do?Stay simple, stay pure. SimPure believes in a minimalist lifestyle, and we are committed to making it easy for you to get a clean, comfortable, and safe home.SimPure WP2-400UV Specifications:Maximum Flow Rate: 400 GPD (400 Gallons Per Day)Pure to Drain Ratio: 1.5:1Power Requirements: 100-240 Volts, 60Hz, AC. 6WattsFeed Water Temperature: 41-100℉ (5-38℃)Ambient Temperature: 40-104℉ (4-40℃)Filtration Precision: 0.0001 micronsUV Light: UV wavelength: 270~280nm; UV dose: 8600uJ/cm²Dimensions: 15.9″ x 15.6″ x 5.2″8-Stage RO+UV Water Filtration SystemPremium 4 large filters remove up to 99.99% of 1000+ contaminants, like, Odor, Lead, Fluoride, Nitrates, heavy metals. The equipped UV sterilizer, effectively reduce up to 99.999% of harmful microorganisms in your water. Supplying you spring-fresh and healthy water.400 GPD & 1.5:1 Pure to Drain RatioAdvanced 400GPD membrane offering an exceptional 1.5:1 pure to drain ratio. With a fast and stable water flow rate, this RO system fills a 200ml cup with water in 10 seconds. High pure to drain ratio provide you more pure water, less water waste and save your money.TDS Can Reduce To ZeroOver 95% TDS removal rate and 99.999% UV sterilization for safe drinking water. When tap water TDS≤200ppm, it can reduce the TDS to ZERO. When tap water TDS is between 200~500ppm, it can reduce the TDS very close to ZERO. Tankless DesignWP2-400UV RO System adopts tankless design, which saves 70% space of undersink and produces pure water on demand without waiting, also eliminates the need for the water storage tank, which avoiding secondary pollution and easier to install. Built-in Powerful Booster PumpThe booster pump will increase water pressure inlet the RO filter, saving at least 50% waste water. With a booster pump, the RO system will produce the purified water with a faster speed than traditional RO system without booster pump.UV SterilizerOur UV sterilization system eliminates bacteria, algae, and other microorganisms from your tap water with an impressive removal rate of over 99.99%. SimPure UV purification system can make water purification to another level. Taste the difference! ModelWP2-400UVProduct Weight 17.6 Ib Feed Water Pressure15 – 70 PSIWater Flow 0.28 Gallons Per Minute, 400 Gallon Per Day Feed Water Temperature41-100℉ / 5-38℃Running Noise ≤48dB (Measure around 40 inches from the machine) Feed Water TypeMunicipal potable/tap water or well water meeting government drinking water standards (TDS≤500 ppm)UV FilterUV wavelength range: 270~280nm; UV dose: 8600uJ/cm²; Lifespan: 3,000 hours of continuous operation, equivalent to around 8 years of usage for a family’s water needs.Rated Power 62W Filter Service LifePP Filter (Over 3-6 months), CTO Filter (Over 3-6 months), RO Filter (Over 12-24 months), T33 Filter (Over 3-6 months)Rated VoltageAC 110 Volts / 60HZRemoval RateTDS (Total dissolved solids):≥99.87% PF0S/PFOA:＞98.24% Chlorine:＞99.49% Lead:＞96.62% Nitrates:＞99.98% Fluoride:＞99.77% Chromium:＞98.70% Arsenic:＞99.84% Total coliforms:＞99.99% Package List (Full Set of WP2-400UV):WP2-400UV main body 1x PP filter cartridge 1x CTO filter cartridge 1x RO filter cartridge 1x T33 filter cartridge SUS304 stainless steel faucetUser Manual PE Tubing (White, Blue, Red) Drain saddle Faucet adaptor ¼” tube QC Feedwater valve 9/16″ Spare parts kit Frequently Asked Questions Q: The system cannot be powered on after you insert the power plug. A: Check the power under the sink, as this occurs primarily when the power under the sink is powered off. Also check the connection betwen the power plug and the power outlet to ensure that the system has been correctly plugged into the power outlet. To test whether there is a problem with the system itself, simply pick up the system and try another power outlet. Q: No output water from the faucet. A1: Water supply is off:Turn on the feed water adapter or water supply valve. A2: Incorrect filter installation:Reinstall the filter and make sure each filter cartridge is installed in the correct location. A3: A tubing is crimped:Check all the tubing and remove any crimps. Q: Low water flow at the faucet. A1: A tubing is crimped or there is a leak from the tubing connection:Check to ensure that all tubing is installed correctly and completely. A2: Low water temperature:Be sure to use it at a temperature of 40-100℉. A3: Low water pressure:Confirm the water pressure is between 15-60 psi. A4: The filter cartridge has been clogged: If you are using well water as the source, please ensure that the feed water has been through a pre-filtration system. Otherwise, large particles in the well water will easily clog the filter and shorten the filter life. Q: Why does black water come out during flushing? A: It’s normal that black water comes out when flushing. The purpose is to remove carbon powder remaining on the surface of filter materials. You can normally use it after flushing for 5 minutes. Q: Filtered water from the faucet tastes like tap water. A1: Incorrect tubing installation:Make sure the drain tubing is not connected to the faucet. A2: The filter is expired: Replace the T33 filter or RO filter cartridge. Q: What should I do if the system is leaking. A: Check all the joints, filttings, and tubing connections to locate the leakage. Make sure the cartridges are well installed.Turn off shut off valve, then solve it.ShippingReturnFeedbackPaymentContact usShipping Fast shipping by USA LOCAL FAST SHIPPING, All of the products will be shipped out within 1 working day after we received the payment and your contact phone number. Why Choose the USA Stock? 1. USA Local Shipping, No Extra Customs Cost to the USA 2. Fast Delivery: 2-5 Working days Delivery 3. Best After-Sales Service!!!Return1. Accept Return in 60 days for refund or replacement, goods in resalable condition. 2. Offer two year for repair warranty. 3. Contact for address and reference number before return(note: unannounced parcel may be returned to wrong address, seller will not be responsible for this). 4. No factory warranty for the man-made damage.FeedbackPlease leave five stars positive feedback positive comment and Five-Stars. Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything. communication Please! PaymentWe accept all major Credit cards, PayPal, and Google Pay. Taxes may be applicable at checkout.Contact usSERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product. On Jun 6, 2024 at 20:07:51 PDT, seller added the following information:
High Capacity Transparent Whole House Water Filter System with Sediment Filter
High Capacity 10 x 4.5-Inches Transparent Whole House Water Filter Purifier System with Presser Relief Button, 1” Inlet/Outlet Brass Port & Yearly Supply (4) Polypropylene Sediment Cartridges 5 Micron Product Description DURABLE STRUCTURE: 10”x 4.5” Transparent High Capacity Housing is proper for high-flow and heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10”x 4.5” 5 Micron Sediment Water Filter – Used for effectively removing most sediments from water. POINT OF USE: This System for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Such systems usually use as pre-treatment to maximized efficiency of the following filters. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands,& silt. EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed. 5 MICRON SEDIMENT CARTRIDGE is wrapped & sealed & meets NSF Standards & Regulations. WELL-MATCHED: 3M 70020162437, American Plumber WDGD-5005, Fette Filter COMIN18JU061077, Aqua-Pure AP810, Everpure DEV9108-44, Filter Specialist CMMF05975-45W1, Hydronix SDC-45-1005, Liquatec SDF-45-1005, Neo-Pure MB-45098-05, Pentair DGD-5005, 9108-44, however for best preferment use only original RONAQUA CARTRIDGES. Cartridge Lifetime – 20,000 gallons – replace 2-3 times a year – depending on your water quality. WELL-MATCHED MODELS OF HOUSINGS: BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Hydronix HX-HF45-10CLBK10 and HF45-10BLBK15, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M. Description: The 10″x 4.5″ Transparent High Capacity Housing for Whole House Water Filtration System with 1″ Inlet / Outlet Ports (RA-124-10S) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The black cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. WARNING: OPERATING PRESSER NO MORE THAN 60 PSI Filter Cartridges Included in this Set are 10″x 4.5″ Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) The Big 10″ x 4.5″ Sediment Filter is often the first filter installed in the Whole House Water Filter circuit. It is often the first point of contact between your water supply and your home and is used as a pre-filtration unit before the water continues to reverse osmosis and activated carbon filters. It catches unwanted particles, including sand, dirt, silt, rust, and other fine particles as they attempt to enter your house’s water system. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. The Big 10″ x 4.5″ filters are made of fine-melted polypropylene that are blown and spun into cylinder-like form. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, as well as household water appliances like boilers, refrigerators, ice-makers, and many more, to perform better for longer periods of time. The Big water filter has wider dimensions than standard water filters, allowing it to process more water in less time for your house. A Big Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size is recommended in the first stage of installation to prevent the clogging of the next stage of filters. The main difference between a regular Sediment Filter and a Big Sediment Filter is the size, a Big Sediment Filter is usually used for filtering the water on the entrance into the house, appropriately called whole house filter. It is able to filter a larger volume of water than a regular filter with its larger surface area, size, and radius Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 5 MICRON Flow Rate 20 GPM Unit Height IN/CM 13.75 IN/34.93 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 7 IN/17.78 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 7 IN/17.78 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 1″ NPT Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
10″ Clear Standard Whole House Water Filter System 4 Sediment 50 Micron Filters
Untitled Document 10 Inches European Design Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Yearly Supply (4) Sediment Cartridges 50 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 50 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 50 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-127-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 50 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.75 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 4.75 IN/12 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 4.75 IN/12 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
10″ Clear Standard Whole House Water Filter System with Pleated Sediment Filter
10 Inches Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Yearly Supply (4) Pleated Sediment Cartridges 5 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 5 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 5 MICRON PLEATED SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 9.875” x 2.5”. WELL-MATCHED: Harmsco 801-50 and 801-50W, American Plumber W50PE, Dupont WFPFC3002, Watts FM-50-975, Aquasana EQ-PFC.35, Neo-Pure PS-27097-50, Whirlpool WHKF-WHPL, Hydronix SPC-25-1050, and ECP10-1, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-125-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) Ronaqua pleated sediment water filters reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. Pleated filters are made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. These materials trap suspended particles, materials that block microbes and adsorb unwanted chemicals or substances that cause a chemical change to the water, such as acid neutralization. The pleated design provides an amplified surface area that may extend the filter’s life while removing undesirable particles and chemicals from the water by means of a semipermeable barrier, adsorption, and biological processes. Pleated filters are washable and reusable. A significant advantage of pleated filters is that they protect against a lower pressure drop and allow increased water flow rates. Overall, pleated cartridges outperform standard wound, spun, and melt blown filters because of their re-usability. The Ronaqua pleated sediment water filters have a flow rate of five gallons per minute (GPM). Because these filters are cleanable, the savings are passed down to users through increased filter lifespans and the best part is that these filters fit all 10-inch water filter housings. What is a Pleated Sediment Filter? The Pleated Sediment Filter is much similar to the properties of a regular sediment filter. It is able to filter out physical impurities such as dirt, silt, sand, and sediment; it could also be used in filtration systems as the first stage filtration system. The pleated sediment has a longer lifespan than the regular sediment because of the increased surface area of the filter as well as its material composition; you are able to wipe down and clean this filter of its collected dirt to continue using it. These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 5 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.5 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 5.125 IN/13.02 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 5.125 IN/13.02 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
WP2-400GPD 8 Stage UV Drinking Water Filter RO Reverse Osmosis System Under Sink
SimPure WP2-400UV Tankless Reverse Osmosis System Under Sink With UV-C Sterilization Zero TDS, 400 GPD RO Water Filter System , Ultra Safe 8-Stage Drinking Water Filtration System, 1.5:1 Pure to Drain Water Purification with Booster Pump, Upgrade Stainless Steel Panel, SUS304 FaucetFor Household, Offices, Restaurant, Salons, Labs, etc.US Warehouse! Fast Delivery, Fast Received! SimPure WP2-400UV RO Water Filtration System has been independently tested by SGS – Refer to GB/T 5750.4-2006, GB/T 5750.6-2006, GB/T 5750.11-2006, GB/T 5750.12-2006 and EPA 537.1 / 300.0 / 200.8 standard – against NSF/ANSI 58 standardDescription:【UV+RO 8-Stage Tankless Reverse Osmosis System】The SimPure ROULP-3012-400-T1 has been verified and tested by SGS and meets the NSF/ANSI 58 Standard. This ensures its exceptional quality and performance. It can convert your tap water into pure and healthy drinking water by removing 99.99% of the 1,000+ contaminants including viruses, bacteria, chemicals (PFOA/PFOS, Pharmaceuticals), heavy metals (Lead, Arsenicetc), chlorine, TDS (fluoride, nitrates/nitrites) and etc. Say goodbye to the hidden dangers of tap water and eliminate the need to purchase bottled water for your home.【95%+ TDS Removal Rate】SimPure high-efficiency RO Filter removes contaminants 0.0001 microns or greater in diamete. This tankless ro water filter system is equipped with SimPure special reverse osmosis membrane, so the TDS Removal Rate can reach up to 95%+. If the TDS of your tap water is between 0-200ppm, the filtered water will be close to 0ppm. If the TDS is between 200-500ppm, the filtered water will be below 25ppm. And If the TDS is between 500-1000ppm, the TDS removal rate can also reach 90%+. If the TDS is >1000ppm, then we recommend you buy the pre-filter to pretreat the water, otherwise the large particles in the water are easy to block the filter element.【UV Water Purifier】Use no chemicals and emits absolutely no by-products, effectively destroying 99.999% of microorganisms, bacteria, germs more thorough sterilization from your water. SimPure UV purification system combined with 4-Larger Stages RO Filtration System, can make water purification to another level. Taste the difference!.【400 GPD & 1.5:1 Pure to Drain Ratio】WP2-400UV offers faster flow-400 gallons per day with lower waste 1.5:1 pure to drain ratio, which will save your water bills. Great for household and light commercial in Restaurants, Salons, Labs, and Offices all benefit in their ways from high-quality RO water.【RO System With Booster Pump】With a booster pump, you will never worry for low water pressure, it will easily booster your water pressure to the optimal level and run the RO system more efficiently, producing the purified water fater. Meanwhile, saving at least 50% more waste water than a traditional RO system without a booster pump.【Tankless Design】SimPure WP2-400UV adopts tankless design, which can save up to 70% of your under sink space. It will be much easier and more convenient to install, ready to use within 30 minutes. Also you can get rid of the water tank, avoid the secondary pollution. It supplies you 24/7 fast and stable flow purified water, never need to wait.【Upgrade Stainless Steel Panel】With stainless steel panel, protect your machine from corrosion and damp, Anti-friction, waterproof, oil-proof.【SERVING USA SINCE 2006】Seattle, WA USA, SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product. SimPure is specializing in creating ergonomically designed, efficient household filtration, and purification systems. SimPure technology focuses on water purification products for more than 15 years. Bullet Specification:TDS (Total dissolved solids):≥99.87%PF0S/PFOA:＞98.24%Chlorine:＞99.49%Lead:＞96.62%Nitrates:＞99.98%Fluoride:＞99.77%Chromium:＞98.70%Arsenic:＞99.84%Total coliforms:＞99.99%Who we are?SimPure believe that bright futures for humanity begin with clean water, and we have made it our mission to provide that. In short 10 years, and proudly passed ISO9001, CE, FDA, and NSF certification early in 2013.What we do?Stay simple, stay pure. SimPure believes in a minimalist lifestyle, and we are committed to making it easy for you to get a clean, comfortable, and safe home.SimPure WP2-400UV Specifications:Maximum Flow Rate: 400 GPD (400 Gallons Per Day)Pure to Drain Ratio: 1.5:1Power Requirements: 100-240 Volts, 60Hz, AC. 6WattsFeed Water Type: Tap water or Well waterFeed Water Temperature: 41-100℉ (5-38℃)Ambient Temperature: 40-104℉ (4-40℃)Filtration Precision: 0.0001 micronsUV Light: UV wavelength: 270~280nm; UV dose: 8600uJ/cm²Dimensions: 15.9″ x 15.6″ x 5.2″8-Stage RO+UV Water Filtration SystemPremium 4 large filters remove up to 99.99% of 1000+ contaminants, like, Odor, Lead, Fluoride, Nitrates, heavy metals. The equipped UV sterilizer, effectively reduce up to 99.999% of harmful microorganisms in your water. Supplying you spring-fresh and healthy water.400 GPD & 1.5:1 Pure to Drain RatioAdvanced 400GPD membrane offering an exceptional 1.5:1 pure to drain ratio. With a fast and stable water flow rate, this RO system fills a 200ml cup with water in 10 seconds. High pure to drain ratio provide you more pure water, less water waste and save your money.TDS Can Reduce To ZeroOver 95% TDS removal rate and 99.999% UV sterilization for safe drinking water. When tap water TDS≤200ppm, it can reduce the TDS to ZERO. When tap water TDS is between 200~500ppm, it can reduce the TDS very close to ZERO. Tankless DesignWP2-400UV RO System adopts tankless design, which saves 70% space of undersink and produces pure water on demand without waiting, also eliminates the need for the water storage tank, which avoiding secondary pollution and easier to install. Built-in Powerful Booster PumpThe booster pump will increase water pressure inlet the RO filter, saving at least 50% waste water. With a booster pump, the RO system will produce the purified water with a faster speed than traditional RO system without booster pump.UV SterilizerOur UV sterilization system eliminates bacteria, algae, and other microorganisms from your tap water with an impressive removal rate of over 99.99%. SimPure UV purification system can make water purification to another level. Taste the difference! Package List (Full Set of WP2-400UV):WP2-400UV main body 1x PP filter cartridge 1x CTO filter cartridge 1x RO filter cartridge 1x T33 filter cartridge SUS304 stainless steel faucet PE Tubing (White, Blue, Red) Drain saddle Faucet adaptor ¼” tube QC Feedwater valve 9/16″ Spare parts kit Frequently Asked Questions Q: The system cannot be powered on after you insert the power plug. A: Check the power under the sink, as this occurs primarily when the power under the sink is powered off. Also check the connection betwen the power plug and the power outlet to ensure that the system has been correctly plugged into the power outlet. To test whether there is a problem with the system itself, simply pick up the system and try another power outlet. Q: No output water from the faucet. A1: Water supply is off:Turn on the feed water adapter or water supply valve. A2: Incorrect filter installation:Reinstall the filter and make sure each filter cartridge is installed in the correct location. A3: A tubing is crimped:Check all the tubing and remove any crimps. Q: Low water flow at the faucet. A1: A tubing is crimped or there is a leak from the tubing connection:Check to ensure that all tubing is installed correctly and completely. A2: Low water temperature:Be sure to use it at a temperature of 40-100℉. A3: Low water pressure:Confirm the water pressure is between 15-60 psi. A4: The filter cartridge has been clogged: If you are using well water as the source, please ensure that the feed water has been through a pre-filtration system. Otherwise, large particles in the well water will easily clog the filter and shorten the filter life. Q: Why does black water come out during flushing? A: It’s normal that black water comes out when flushing. The purpose is to remove carbon powder remaining on the surface of filter materials. You can normally use it after flushing for 5 minutes. Q: Filtered water from the faucet tastes like tap water. A1: Incorrect tubing installation:Make sure the drain tubing is not connected to the faucet. A2: The filter is expired: Replace the T33 filter or RO filter cartridge. Q: What should I do if the system is leaking. A: Check all the joints, filttings, and tubing connections to locate the leakage. Make sure the cartridges are well installed.Turn off shut off valve, then solve it.ShippingReturnFeedbackPaymentContact usShipping Fast shipping by USA LOCAL FAST SHIPPING, All of the products will be shipped out within 1 working day after we received the payment and your contact phone number. Why Choose the USA Stock? 1. USA Local Shipping, No Extra Customs Cost to the USA 2. Fast Delivery: 2-5 Working days Delivery 3. Best After-Sales Service!!!Return1. Accept Return in 60 days for refund or replacement, goods in resalable condition. 2. Offer two year for repair warranty. 3. Contact for address and reference number before return(note: unannounced parcel may be returned to wrong address, seller will not be responsible for this). 4. No factory warranty for the man-made damage.FeedbackPlease leave five stars positive feedback positive comment and Five-Stars. Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything. communication Please! PaymentWe accept all major Credit cards, PayPal, and Google Pay. Taxes may be applicable at checkout.Contact usSERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product.
10″ Clear Standard Whole House Water Filter System with 1 Micron Sediment Filter
Untitled Document 10 Inches Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Sediment Cartridge 1 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 1 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 1 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-125-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 1 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.5 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 5.125 IN/13.02 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 5.125 IN/13.02 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
10″ Clear Standard Whole House Water Filter System 10 Micron Sediment Filter
Untitled Document 10 Inches European Design Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Sediment Cartridge 10 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 10 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 10 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-127-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 10 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.75 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 4.75 IN/12 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 4.75 IN/12 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
10″ Clear Standard Whole House Water Filter System 10 Micron Sediment Filter
Untitled Document 10 Inches Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Sediment Cartridge 10 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 10 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 10 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-125-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 10 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.5 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 5.125 IN/13.02 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 5.125 IN/13.02 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)