Custom Building Products Simplegrout Gallon Natural Gray Pre-Mixed Sanded Tile

Ready-to-use, no mixing, no mess alternative to traditional sanded grout. This sanded, non-shrink and crack-resistant formula is highly-resistant to most common household stains retaining original color for years to come. for new tile grout installation and restoration of existing tile grout. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble, and granite. Porous stone can be stained by grout; follow directions in surface preparation instructions. Interior use only. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Do not use in steam rooms, areas exposed to prolonged water exposure or underwater. Protected with MoldGard Technology to resist mold and mildew growth. For grout joints 1/16″ to 1/2″. Allow 24 hours drying time. Clean tools with.

Custom Building Products Simplegrout Gallon Haystack Pre-Mixed Sanded Tile Grout

Ready-to-use, no mixing, no mess alternative to traditional sanded grout. This sanded, non-shrink and crack-resistant formula is highly-resistant to most common household stains retaining original color for years to come. for new tile grout installation and restoration of existing tile grout. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble, and granite. Porous stone can be stained by grout; follow directions in surface preparation instructions. Interior use only. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Do not use in steam rooms, areas exposed to prolonged water exposure or underwater. Protected with MoldGard Technology to resist mold and mildew growth. For grout joints 1/16″ to 1/2″. Allow 24 hours drying time. Clean tools with.

Frame and Under-Body 1K Satin Black Coating, 3.6 lbs/gal. voc, 1 Gallon, SMR-270

This sale is for one gallon of Frame and Under-Body 1K Satin Black Coating, 3.6 lbs/gal. voc, 1 Gallon, SMR-270 • Home • Auto Restoration • Industrial • Fleet • Marine • 1K Underbody Coating is an enamel based high build coating designed for coating under carriages. This coating is ready-to-spray, requires no hardener and is compliant in all 50 states. For coating frame rails, brackets and under carriages. It dries in 30 minutes (1 coat) and can be reduced with “Zero” V.O.C. reducer up to 25%.Gun Setup (HVLP) 1.5 mm – 1.8 mm Air Pressure 8-10 psi HVLP 40-45 psi ConventionalSUITABLE SUBSTRATES Cleaned or Blasted Steel Cleaned and Sanded Painted Surfaces Pretreated Aluminum Catalyzed Epoxy Primers Catalyzed Urethane Primer Surfacer Self-Etch Primer PREPARATION Remove all dirt, grease or oils, clean surfaces using a Wax & Grease Remover or equivalent. Sand with 180 grit sand-paper. Shake before use. APPLICATION Apply 1 – 2 uniform coats, allowing 10 – 15 minutes of flash time between coats Dry time will be extended if applying two coats Health and Safety: See Safety Data Sheet and labels for additional safety information and handling instructions. * The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and SDS’s of all components, since the mixture will have the hazards of all its parts. * Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury. * Follow spray equipment manufacturer’s instructions to prevent personal injury or fire. * Provide adequate ventilation for health and fire hazard control. * Follow company, product SDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory requirements. * Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on SDS. * Always observe all applicable precautions and follow good safety and hygiene practices. * Safety Data Sheets are available on website.

Sunnyside Corporation 873G1 Pure Raw Linseed Oil, Gallon

Sunnyside Corporation 873G1 Pure Raw Linseed Oil, Gallon Description: Product Description Raw Linseed Oil is 100% pure linseed oil. A very slow drying natural oil that can be mixed with oil-based paints and other coatings or used by itself to increase water repellency and to resist weathering. Raw Linseed Oil is also used to protect unpainted wood furniture as well as to protect metal tools against rust. Dries in 2 to 4 days. From the Manufacturer Founded in 1893, Sunnyside Corporation manufactures paint solvents, safer paint removers, paint additives and cleaners for home center, hardware and paint retailers nationwide. Quality has been our hallmark for over 125 years. Under the fourth generation of family leadership, Sunnyside has provided trusted home improvement products for the professional and the do-it yourselfer. “Innovative Products for Today and Tomorrow.” Features: Penetrates deep and protects wood creating a quality finish for wood furniture and antiques Apply to raw wood only Increases water repellency and weather resistance Can be added directly to oil based paints and stains Slow drying, up to 2-4 days, allowing oil to penetrate deeply into the wood Derived From The Seed Of The Flax Plant No Additives Great For Wood Finishing Dries In 2-4 Days Read Label Carefully Before Use Payment All payments are accepted through PayPal. Shipping: All shipping is free for the continental United States. Standard FREE shipping takes between 3-5 business days Returns In the event that you would like to return your purchase, we allow returns that are processed within 30 days of receiving your order. Please contact us for a return authorization and the return shipping address.