Ultra Custom Pools

Item Tag: Gould

Goulds 10HS05 4″ Submersible Water Well Pump End Only 1/2HP Req 10GPM

Goulds 10HS05 4″ Submersible Water Well Pump End Only 10GPM 7 Stages, 1/2 HP Motor Required The submersible HS pump’s field proven floating impeller stack is designed for superior sand and abrasive handling and durability. The pump is powered by CentriPro 4″ motors for dependable operation and long service life. The complete pump/motor assemblies are CSA listed, CSA/CUS approved motors are available in 2-wire and 3-wire single phase designs. HS series boast a crimped design for strength it will not separate in the harshest conditions. The Stainless steel hex design shafts, shaftcouplings, casings and stage bowls inhibit corrosion. Specifications: Horsepower: 1/2 HP Required* Stages: 7 Recommended Range: 1.5 GPM to 10 GPM * Motor Not Included but is Required

Goulds Pumps 59132 FJ5 Well Casing

Designed for 1/2 HP Goulds water systems, this kit includes the blue cast iron shallow well ejector housing (stamped59182 ), theAD-3731 diffuser in its original box, a mounting gasket, and original hardware.

20 Amp Pushmatic Bulldog Gould ITE Siemens P220 Double or 2 pole 240V Breaker

20 Amp Pushmatic Bulldog Gould ITE Siemens P220 Double or 2 Pole Breaker Used breaker operational when removed from service due to an electrical upgrade, tested for continuity. We have a few like the one in the picture so you may not get the exact one posted but one in similar condition. 30 Day Money Back Guarantee. Let us know if you are looking for different sizes we try to stock them all. We can process your MasterCard, Visa, American Express, or Discover card by phone. Limitation of Liability : In no event shall the Seller be liable for incidental or consequential damages, breach of warranty damages, or any other damages of any kind, including damages alleged to arise out of Seller’s negligence, as they relate to the use or misuse of these items under any circumstances.Please remember that the estimated delivery date that is listed by eBay on the page is only an estimate not a guarantee. We ship out all of our items within the next business day, most times the same business day. We can not guarantee that you will get your purchase by the estimated date. We try our best but after it is in the hands of the US Post Office, Fed-Ex, or UPS it is OUT OF OUR CONTROL. Thank you for your understanding.

Goulds GT10 Irri-Gator self priming centrifugal pump – 1 HP SAME DAY SHIPPING!!

Goulds GT10 Irri-Gator self priming centrifugal pump – 1 HP 115/230 Volts, 1 Phase, 1-1/2″ NPT Suction, 1-1/2″ NPT Discharge APPLICATIONSSpecifically designed for the following uses:Lawn sprinklingIrrigationAir conditioning systemsHeat pumpsWater transferDewateringFEATURESSelf-Priming DesignOnce pump is primed, filled with water, it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.ServiceableBack pullout design allows disassembly of pump for service without disturbing piping.Two compartment motor for easy access to motor wiring and replaceable components.Diffuser (Guidevane) Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance.Impeller F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant.Corrosion ResistantElectro-coat paint process is applied inside and out, then baked on.Casing Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings providedfor vacuum gauge and casing drain.Powered for Continuous Operation Pump ratings are within the motor manufacturer’s recommended working limits. Can be operatedcontinuously without damage.Mechanical SealCarbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.SPECIFICATIONSPump:Pipe connections: 1 1/2 NPT suction 1 1/2 NPT dischargeCapacities: to 110 GPM at 5 foot suction lift.Heads: to 128 feet.Reprime capabilities: to 25 feet suction lift.Maximum working pressure: 125 PSIG.Maximum water temperature: 140_ F (60_ C).Rotation: clockwise when viewed from motor end.Motor:NEMA standard open drip proof.60 Hz, 3500 RPM.Stainless steel shaft.Single phase: Ê-1_ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.Optional TEFC motors are available.

Goulds EP0511AC 1/2 HP Submersible Effluent Pump 115V

Goulds EP0511AC 1/2 HP Submersible Effluent Pump 115V 1/2 HP, Single Phase, 115v , Piggyback/Wide-Angle The Goulds Water Technology EP04 and EP05 have a casing and base constructed of rugged thermoplastic to provide superior strength and corrosion resistance. The pumps have a cast iron motor housing for efficient heat transfer, strength, and durability. The pumps have upper and lower heavy duty ball bearing construction. The motor covers are thermoplastic with integral handle and float switch attachment points. The power cables are severe duty rated oil and water resistant. The EP05 impeller is a thermoplastic enclosed design for improved performance. The EP04/EP05 are specifically designed for effluent systems, homes, farms, heavy duty sump, water transfer, and dewatering. Specifications: – Horsepower: 1/2 – Phase: Single – Volts: 115 – Capacities: up to 60 GPM – Total Heads: up to 31 feet – Pipe Connections: 1-1/2″ discharge – Cord Length: 20 feet – Minimum Circuit Breaker: 20 – Amps: 13 – Switch Type: Piggyback/Wide-Angle