Goulds J15S Shallow Water Well Jet Pump, 1-1/2 HP, Single Phase, 115/230 V.
Shallow Jet Pump. Single Phase. More features.
Goulds 10HS05 4″ Submersible Water Well Pump End Only 1/2HP Req 10GPM
Goulds 10HS05 4″ Submersible Water Well Pump End Only 10GPM 7 Stages, 1/2 HP Motor Required The submersible HS pump’s field proven floating impeller stack is designed for superior sand and abrasive handling and durability. The pump is powered by CentriPro 4″ motors for dependable operation and long service life. The complete pump/motor assemblies are CSA listed, CSA/CUS approved motors are available in 2-wire and 3-wire single phase designs. HS series boast a crimped design for strength it will not separate in the harshest conditions. The Stainless steel hex design shafts, shaftcouplings, casings and stage bowls inhibit corrosion. Specifications: Horsepower: 1/2 HP Required* Stages: 7 Recommended Range: 1.5 GPM to 10 GPM * Motor Not Included but is Required
GOULDS WELL PUMP 10GS05411CL 1/2hp 1/60/115 4″sub 10stg 3 wire
This wall pump was pulled out fully functioning working perfect the town went to city sewage in water so no one needed well anymore hence why this was pulled out, but it works perfect perfectly fine
Goulds GT10 Irri-Gator self priming centrifugal pump – 1 HP SAME DAY SHIPPING!!
Goulds GT10 Irri-Gator self priming centrifugal pump – 1 HP 115/230 Volts, 1 Phase, 1-1/2″ NPT Suction, 1-1/2″ NPT Discharge APPLICATIONSSpecifically designed for the following uses:Lawn sprinklingIrrigationAir conditioning systemsHeat pumpsWater transferDewateringFEATURESSelf-Priming DesignOnce pump is primed, filled with water, it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.ServiceableBack pullout design allows disassembly of pump for service without disturbing piping.Two compartment motor for easy access to motor wiring and replaceable components.Diffuser (Guidevane) Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance.Impeller F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant.Corrosion ResistantElectro-coat paint process is applied inside and out, then baked on.Casing Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings providedfor vacuum gauge and casing drain.Powered for Continuous Operation Pump ratings are within the motor manufacturer’s recommended working limits. Can be operatedcontinuously without damage.Mechanical SealCarbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.SPECIFICATIONSPump:Pipe connections: 1 1/2 NPT suction 1 1/2 NPT dischargeCapacities: to 110 GPM at 5 foot suction lift.Heads: to 128 feet.Reprime capabilities: to 25 feet suction lift.Maximum working pressure: 125 PSIG.Maximum water temperature: 140_ F (60_ C).Rotation: clockwise when viewed from motor end.Motor:NEMA standard open drip proof.60 Hz, 3500 RPM.Stainless steel shaft.Single phase: Ê-1_ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.Optional TEFC motors are available.
Goulds EP0511AC 1/2 HP Submersible Effluent Pump 115V
Goulds EP0511AC 1/2 HP Submersible Effluent Pump 115V 1/2 HP, Single Phase, 115v , Piggyback/Wide-Angle The Goulds Water Technology EP04 and EP05 have a casing and base constructed of rugged thermoplastic to provide superior strength and corrosion resistance. The pumps have a cast iron motor housing for efficient heat transfer, strength, and durability. The pumps have upper and lower heavy duty ball bearing construction. The motor covers are thermoplastic with integral handle and float switch attachment points. The power cables are severe duty rated oil and water resistant. The EP05 impeller is a thermoplastic enclosed design for improved performance. The EP04/EP05 are specifically designed for effluent systems, homes, farms, heavy duty sump, water transfer, and dewatering. Specifications: – Horsepower: 1/2 – Phase: Single – Volts: 115 – Capacities: up to 60 GPM – Total Heads: up to 31 feet – Pipe Connections: 1-1/2″ discharge – Cord Length: 20 feet – Minimum Circuit Breaker: 20 – Amps: 13 – Switch Type: Piggyback/Wide-Angle
GOULDS WELL PUMP 5GS05412CL Submersible 1/2hp 3 wire
Goulds 2K50 Impeller
Goulds 2K50 Impeller UE 19317 F3-J7
GOULDS JRS5 AND JRS10 PUMP HEAD CASE USED
The product is a Goulds JRS5 and JRS10 pump head case. USED
Goulds 4″ Submersible Well Pump Model 10GS15 with Motor Brand New Old Stock
It is in stand but that is not included.