4″ x 1 7/8″ Gate Striker Plate Latch Receiver Up To 1″ Pin Face Steel Post
It can accommodate up to a 1″ latch and has a bare finish.
2-3/8″ x 1-7/8″ Panel Adapter with Bolt Designed to Hold 2 Panels Together
2-3/8″ x 1-7/8″ Panel Adapter with Bolt Designed to Hold 2 Panels TogetherThis clamp is designed to hold two panels together. It is known as an adapter because it holds a different size pipe on each side. Hardware is included.
1-7/8″ Panel Clamp Kennel Clamp w/ Bolt & Nut Chain Link Fence
1-7/8″ Panel Clamp with Bolt and Nut Designed to Hold 2 Panels Together.
1 7/8″ x 2 5/16″ Gate Fork Latch Chain Link Fence Hot Dipped Galvanized
106603 Remote Antenna Range Extender Kit Gate Garage Opener Multicode for Linear
106603 Remote Antenna Range Extender Kit Gate Garage Opener Multicode for LinearWorks with all brands of radio receivers that use a standard F-connector type antenna.15 feet commercial grade coaxial cableF-connector and rubber boot on each end5 inch long by 2 inch L bracket with 2 mounting screw holesF-connector barrel connector on L bracket10 inch whip type antenna with F-connectorThe mounting bracket is 5-1/4″ long, with a 2-1/2″ outward extensionKit includes 16′ of co-axial cable, with F type fittings at both ends, a 13″ whip antenna and mounting bracket
Door Decorative Jamestown Strap Hinge Powder Crinkle Finish 16″ x .075″ Thick
Door Decorative Jamestown Strap Hinge Powder Crinkle Finish 16″ x .075″ Thick Powder coated with crinkle finishApproximate thickness: .075″
Garage Door Decorative Pull Handle 9″ Jamestown Crinkle Finish
Powder coated with crinkle finish.
Garage Door Decorative Pull Handle 9″ Jamestown Crinkle Finish (2pcs)
Powder coated with crinkle finish.
Chateau C-ARL-F-ZC Flush Door Gate Latch Mini Warehouse Roll Up Doors Zinc
Chateau C-ARL-F-ZC Flush Door Gate Latch Mini Warehouse Roll Up Doors Zinc The C-ARL-F-ZC is a mini warehouse garage door latch designed to mount flush to a rolling steel door. The Flush Door Latch from Chateau is plated with zinc to withstand the elements on outdoor installation and is designed to accommodate padlocks. This Zinc Latch is designed with wings that fold towards the door for an anti-pry fit for an enhanced level of security. The C-ARL-F-ZC mounts flush to a rolling steel mini warehouse door with two bolts. Features: Double zinc coated to stand up to the elements on outdoor installationsDesigned for padlocksMounts to a rolling steel door with two boltsSits on door with wings fold toward the door for an any-pry fitDimensions: 2-3/16 inches x 6-1/8 inches
Garage Door Port Latching Exhaust Vent 6″ x 2″ Wall Mount Air Vent Hardware Incl
Garage Door Port Latching Exhaust Vent 6″ x 2″ Wall Mount Air Vent Hardware Incl 6″ ID2″ door thicknessMounting hardware included