HOPPE Mortise Lock, 1/2″ DEADBOLT Throw, 1-3/8″ Backset Single Point Silver
A cost effective alternative to using multipoint in any application where you want to use HOPPE handle sets. Publisher: HOPPE.
Hoppe Mortise Lock Single Point Mortise Lock 1″ Deadbolt Throw 2-3/8″ Backset
This will NOT work for replacing the lock body on multipoint lock units. This is a single point lock only. Hoppe Mortise Lock, Manual Gear, Single Point with 1 inch (25mm) Deadbolt throw Used by Caradco, Jeldwen, Norco and others. Stainless face plate 5/8 (16mm) inch wide x 10-7/8 inches long Face plate screw holes are spaced 10-1/8 inch Backset: 2-3/8 inch (60mm) – distance from edge of face plate to center of lock handle All Current Model Single Point Locks from HOPPE w/ Rotation Limiter (Lever is fixed and does not move after door is locked) 11517463 – 35mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends 11517475 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517487 – 45mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends 11517499 – 45mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517505 (this listing) – 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517517 – 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517529 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with square ends (Please contact office if needing one of the locks not currently linked to our site) Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below. HOPPE Screws for Installation: 8785695 – Screw 1-3/8″ ( 35mm ) 8mm Head – Stainless Steel 8785687 – Screws, 3/4″ (20mm ) 8mm Head – Stainless Steel Helpful Articles How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn’t Retract How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock
Hoppe Mortise Lock Single Point Mortise Lock 1″ Deadbolt Throw 1-3/8″ Backset
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. This is a single point lock and it is not interchangeable with the lock body on a HOPPE multipoint lock, nor can it be used to repair or provide parts for a multipoint lock.
HOPPE MORTISE LOCK, 1-3/4″ BACKSET SINGLE POINT LOCK SPL) 1″ DEADBOLT NEW STYLE
<div style=”text-align:center”><img src=”http://ti2.auctiva.com/sw/java.gif” border=”0″><br><table align=”center”><tr><td><a style=”text-decoration:none” href=”http://store.auctiva.com/cwlocks3711″><img src=”http://ti2.auctiva.com/sw/images.gif” border=”0″></a></td><td height=”27px” valign=”middle” align=”center”><font face=”arial” size=”2″><b><a href=”http://store.auctiva.com/cwlocks3711″>cwlocks3711</a> Store</b></font></td></tr></table></div> <img src=”http://ti2.auctiva.com/web/aswCredit.gif” border=”0″><br><a href=”http://www.auctiva.com?how=scLnk0″ target=”_blank”><img src=”http://ti2.auctiva.com/images/sc1line0.gif” border=”0″></a>Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks. 16mm Hoppe 45/92 Single Point Lock (SPL) 1″ Deadbolt, new style with locking handle Deadbolt Throw: 1 inch (25 mm). Face Plate Width: 5/8 (16 mm) Face Plate Length: 10-13/16 inch. Faceplate Screw Holes: 10-1/8 inch. Faceplate Material: Stainless Steel Backset: 1-3/4 inch (45 mm) – distance from edge of face plate to center of lock handle. New 2016 Single Point Locks from HOPPE w/ Rotation Limiter ( fixed lever, after locked)11517529 – 35/92, 25.4mm DB Throw 16mm SQUARE Ends11517463 – 35/92, 14mm DB Throw 16mm Radius Ends11517475 – 35/92, 25.4mm DB Throw 16mm Radius Ends11517487 – 45/92, 14mm DB Throw, 16mm Radius Ends11517499 – 45/92, 25.4mm DB Throw 16mm Radius Ends11517505 – 60/92, 25.4mm DB Throw 16mm Radius Ends11517517 – 70/92, 25.4mm DB Throw 16mm Radius Ends <div style=”text-align:center”><a style=”text-decoration:none” href=”http://www.kickitback.com/ebay-counters-buyers.aspx?how=deadcounter”><img src=”http://www.sellathon.com/Resources/Images/countercredit.gif” border=”0″></a></div>
HOPPE Mortise Lock Single Point 1-3/4″ Backset With Satin Nickel Cylinder
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset With Satin Nickel Profile Cylinder IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset
IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),
Hoppe Mortise Single Point Lock Rotation Limiter 1 Inch Deadbolt Throw 60/92
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. IMPORTANT NOTICE: This single point mortise lock CANNOT used to repair a multipoint lock There are no interchangeable parts from this lock that can be used on other locks. Hoppe manual single point mortise lock (SPL) Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks. 16mm Hoppe 45/92 Single Point Lock (SPL) 1″ Deadbolt, new style with locking handle Deadbolt Throw: 1 inch (25 mm). Face Plate Width: 5/8 (16 mm) Face Plate Length: 10-13/16 inch. Faceplate Screw Holes: 10-1/8 inch. Faceplate Material: Stainless Steel Backset: 1-3/4 inch (45 mm) – distance from edge of face plate to center of lock handle. All Current Model Single Point Locks from HOPPE w/ Rotation Limiter (Lever is fixed and does not move after door is locked) 11517475 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517505 – 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517517 – 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends (Please contact office if needing one of the locks not currently linked to our site)Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below. HOPPE Screws for Installation: 8785695 – Screw 1-3/8″ ( 35mm ) 8mm Head – Stainless Steel 8785687 – Screws, 3/4″ (20mm ) 8mm Head – Stainless Steel Helpful Articles How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn’t Retract How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock
Hoppe Mortise Single Point Lock 16mm Faceplate 14mm DeadBolt Throw 35/92 Gear
HOPPE 1-3/8 inch Backset, Single Point Lock (SPL) IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a multipoint lock. There are no interchangeable parts from this lock that can be used on other locks. PZ (Distance from center of handle to center of cylinder): 3-5/8 in. (92mm) Backset: 1-3/8 inch (35 mm) Deadbolt extends: 1/2 in. (14mm) Faceplate Width: 5/8 in. (16mm)
Hoppe Mortise Single Point Lock 16mm Faceplate 14mm Deadbolt Throw 45/92 Gear
IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lock There are no interchangeable parts from this lock that can be used on other locks. Hoppe manual single point mortise lock (SPL) Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks. Backset: 1-3/4″ (45mm), Deadbolt Throw:.55″ (14mm), Number of Screws: 2 Click here if the dead bolt will not retract Priced and sold each.
HOPPE Mortise Lock, Single Point 1-3/4″ Backset With Black Profile Cylinder
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset With Black Profile Cylinder IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),