JVCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 3/4 in. x 300 in. (Black)
Product HighlightsJVCC FLOCK-1 Flocking Tape is a black cotton flock non-woven product with an adhesive coating on one side and denser than traditional felt tape. This product will make a great replacement for velvet. Available in adhesive coins, dots, and 25-foot rolls ranging in sizes 1/2 inch to 4 inches wide. Flocking tape can be used for several non-entertainment related applications such as an abrasion-resistant substrate and sliding surface for noise reduction (anti-squeak) and dampening, basic surface separation (padding furniture feet), scratch prevention, and rattle noise reduction. It is often used in automobile dash interiors to keep parts from rubbing together and making noise.For the entertainment industry FLOCK-1 flocking tape can be easily applied around the edges of a wall screen to provide a definitive non-reflective border frame, which gives a more finished and professional appearance. Because JVCC FLOCK-1 Flocking Tape is non-reflective the border frame will provide an extra perception of brightness and will focus the viewer’s attention to the screen.Carrier/Backing: non-woven acrylic flock. Adhesive: synthetic polymer. Release Liner: bleached Kraft paper. Thickness: 26 mils (carrier, adhesive, liner) 20 mils (carrier, adhesive) 6 mils (liner). Adhesion: 115 ounces per inch (to stainless steel test panel). JVCC FLOCK-1 Flocking Tape is a black cotton flock non-woven product with an adhesive coating on one side and denser than traditional felt tape. This product makes a great replacement for velvet. Flocking tape can be used for several non-entertainment related applications such as an abrasion-resistant substrate and sliding surface for noise reduction (anti-squeak) and dampening, basic surface separation (padding furniture feet), scratch prevention, and rattle noise reduction. It is often used in automobile dash interiors to keep parts from rubbing together and making noise. For the entertainment industry FLOCK-1 flocking tape can be easily applied around the edges of a wall screen to provide a definitive non-reflective border frame, which gives a more finished and professional appearance. Because JVCC FLOCK-1 is non-reflective the border frame will provide an extra perception of brightness and will focus the viewer’s attention to the screen. Country of Origin: United States. Technical Information- Backing/Carrier: non-woven acrylic flock – Adhesive: synthetic polymer – Release Liner: bleached Kraft paper – Thickness: 26 mils (carrier, adhesive, liner) 20 mils (carrier, adhesive) 6 mils (liner) – Adhesion: 115 ounces per inch (to stainless steel test panel)
JVCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 1/2 in. x 300 in. (Black)
Product HighlightsJVCC FLOCK-1 Flocking Tape is a black cotton flock non-woven product with an adhesive coating on one side and denser than traditional felt tape. This product will make a great replacement for velvet. Available in adhesive coins, dots, and 25-foot rolls ranging in sizes 1/2 inch to 4 inches wide. Flocking tape can be used for several non-entertainment related applications such as an abrasion-resistant substrate and sliding surface for noise reduction (anti-squeak) and dampening, basic surface separation (padding furniture feet), scratch prevention, and rattle noise reduction. It is often used in automobile dash interiors to keep parts from rubbing together and making noise.For the entertainment industry FLOCK-1 flocking tape can be easily applied around the edges of a wall screen to provide a definitive non-reflective border frame, which gives a more finished and professional appearance. Because JVCC FLOCK-1 Flocking Tape is non-reflective the border frame will provide an extra perception of brightness and will focus the viewer’s attention to the screen.Carrier/Backing: non-woven acrylic flock. Adhesive: synthetic polymer. Release Liner: bleached Kraft paper. Thickness: 26 mils (carrier, adhesive, liner) 20 mils (carrier, adhesive) 6 mils (liner). Adhesion: 115 ounces per inch (to stainless steel test panel). JVCC FLOCK-1 Flocking Tape is a black cotton flock non-woven product with an adhesive coating on one side and denser than traditional felt tape. This product makes a great replacement for velvet. Flocking tape can be used for several non-entertainment related applications such as an abrasion-resistant substrate and sliding surface for noise reduction (anti-squeak) and dampening, basic surface separation (padding furniture feet), scratch prevention, and rattle noise reduction. It is often used in automobile dash interiors to keep parts from rubbing together and making noise. For the entertainment industry FLOCK-1 flocking tape can be easily applied around the edges of a wall screen to provide a definitive non-reflective border frame, which gives a more finished and professional appearance. Because JVCC FLOCK-1 is non-reflective the border frame will provide an extra perception of brightness and will focus the viewer’s attention to the screen. Country of Origin: United States. Technical Information- Backing/Carrier: non-woven acrylic flock – Adhesive: synthetic polymer – Release Liner: bleached Kraft paper – Thickness: 26 mils (carrier, adhesive, liner) 20 mils (carrier, adhesive) 6 mils (liner) – Adhesion: 115 ounces per inch (to stainless steel test panel)
JVCC ACF-06 Acrylic Craft Felt Tape: 1/2 in. x 25 ft. (Red)
Product HighlightsJVCC ACF-06 Felt Tape is a is a 1mm thick acrylic craft felt tape coated on one side with a synthetic polymer adhesive. Craft felt is used by hobbyists and when applying light weight, pressed, or needle punched felts for crafting projects.Other uses include joining and temporarily repairing fabric; for curtains and cloth drapes in backdrops; children’s crafts; holiday decorations; card marking; and scrapbooking.Colors currently stocked in 1/2 wide include Black, Dark Brown, Emerald Green, Indigo Blue, Neon Lime, Neon Orange, Neon Yellow, Red, Shocking Pink, Tan, and White. Please note the Dark Brown is very dark – you can definitely see the difference when held up next to the black felt, but it is very dark.Carrier/Backing: acrylic felt. Adhesive: synthetic polymer. Adhesion: 115 ounces per inch (to stainless steel test panel). Service/Operating Temperature: up to 180FThickness: 50 mils (carrier, adhesive, liner) 46 mils (carrier, adhesive) 4 mils (liner). Release Liner: paper. JVCC ACF-06 Felt Tape is a is a 1mm thick acrylic craft felt tape coated on one side with a synthetic polymer adhesive. Craft felt is used by hobbyists and when applying light weight, pressed, or needle punched felts for crafting projects. Other uses include joining and temporarily repairing fabric; for curtains and cloth drapes in backdrops; children’s crafts; holiday decorations; card marking; and scrapbooking. Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC ACF-06 can hide seams being photographed and is used for applying a clean, dark edge to platforms, flats, and portals. Can also be used to create matte borders or edges and to line display and jewelry cases. It is the easiest felt product to work with by hand since it’s paper liner removes quicker and without as much effort compared to other felt products we sell. Typically has a fuzzier appearance and is used for applications where long term wear and tear is not a requirement. Craft felt is the most economically priced felt we sell. Colors currently stocked in 1/2 wide include Black, Dark Brown, Emerald Green, Indigo Blue, Neon Lime, Neon Orange, Neon Yellow, Red, Shocking Pink, Tan, and White. Please note the Dark Brown is very dark – you can definitely see the difference when held up next to the black felt, but it is very dark. Made in the U.S. NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Core: 3 inch diameter – Backing/Carrier: acrylic felt – Adhesive: synthetic polymer – Release Liner: paper – Thickness: 50 mils (carrier, adhesive, liner) 46 mils (carrier, adhesive) 4 mils (liner) – Adhesion: 115 ounces per inch (to stainless steel test panel) – Service/Operating Temperature: up to 180F